There are a lot of "magic numbers" that we really don't want to extract
as a constant.
Until now, many @SuppressWarnings annotations were added, but it makes
no sense to check for magic number if we silent the warnings everywhere.
Centralize video size management in ScreenInfo.
This allows to always send the correct initial video size to the client
if the video orientation is locked.
Some workarounds are needed on some devices. But applying them may cause
exceptions on other devices, where they are not necessary anyway.
Do not report these errors in release builds.
Closes#994 <https://github.com/Genymobile/scrcpy/issues/994>
Internally, a failure to invoke a method via reflection was partially
managed using exceptions, partially using a null return value.
Handle all errors at the same place, by not catching
NoSuchMethodException too early.
When an ApplicationInfo is set (commit
90293240cc), some devices (Nvidia Shield
TV) attempt to access the Application object, causing a
NullPointerException.
As a workaround, initialize an Application object.
Fixes <https://github.com/Genymobile/scrcpy/issues/940>
Commit 3da95b52bd renamed
'scrcpy-server.jar' to 'scrcpy-server' to avoid issues on the client
side.
However, removing the extension may cause issues with app_process, so
restore the extension only on the device side.
Fixes <https://github.com/Genymobile/scrcpy/issues/944>
The KEY_FRAME_RATE parameter value is necessary for the configuration of
the encoder, but its actual value does not impact the frame rate (only
resources used by the encoder).
Therefore, it's an internal detail and should not be exposed by the
ScreenEncoder class.
Send client version as first parameter and check it at server start.
Signed-off-by: Yu-Chen Lin <npes87184@gmail.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Some devices internally create a Handler when creating an input Surface,
causing an exception:
> Surface: java.lang.RuntimeException: Can't create handler inside
> thread that has not called Looper.prepare()
As a workaround, call Looper.prepareMainLooper() beforehand.
Fixes:
- <https://github.com/Genymobile/scrcpy/issues/240>
- <https://github.com/Genymobile/scrcpy/issues/921>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Some devices do not have some methods that we invoke via reflection, or
their call do not return the expected value. In that case, do not crash
the whole controller.
Enable the attribute "console" of custom_target() introduced in meson
0.48. This allows to get a feedback of what gradle does (which can takes
a very long time).
This produces warnings because we declare to support meson >= 0.37, but
we don't want to stop supporting older versions for that. Older versions
just ignore the option:
> WARNING: Unknown keyword arguments in target scrcpy-server: console
Newer meson versions use it, but warn because we declare supporting
older versions:
> WARNING: Project targetting '>= 0.37' but tried to use feature
> introduced in '0.48.0': console arg in custom_target
Meson does not support conditional branches to suppress such warnings,
so just keep the warnings.
Add two shortcuts:
- Ctrl+o to turn the device screen off while mirroring
- Ctrl+Shift+o to turn it back on
On power on (either via the POWER key or BACK while screen is off), both
the device screen and the mirror are turned on.
<https://github.com/Genymobile/scrcpy/issues/175>
After the recent refactorings, a "control event" is not necessarily an
"event" (it may be a "command"). Similarly, the unique "device event"
used to send the device clipboard content is more a "reponse" to the
request from the client than an "event".
Rename both to "message", and rename the message types to better
describe their intent.
It was already possible to _paste_ (with Ctrl+v) the content of the
computer clipboard on the device. Technically, it injects a sequence of
events to generate the text.
Add a new feature (Ctrl+Shift+v) to copy to the device clipboard
instead, without injecting the content. Contrary to events injection,
this preserves the UTF-8 content exactly, so the text is not broken by
special characters.
<https://github.com/Genymobile/scrcpy/issues/413>
Parsing a String from a serialized control event, encoded as length (2
bytes) + data, will be necessary in several events.
Extract it to a separate method.
On Ctrl+C:
- the client sends a GET_CLIPBOARD command to the device;
- the device retrieve its current clipboard text and sends it in a
GET_CLIPBOARD device event;
- the client sets this text as the system clipboard text, so that it
can be pasted in another application.
Fixes <https://github.com/Genymobile/scrcpy/issues/145>
The socket used the device-to-computer direction to stream the video and
the computer-to-device direction to send control events.
Some features, like copy-paste from device to computer, require to send
non-video data from the device to the computer.
To make them possible, use two sockets:
- one for streaming the video from the device to the client;
- one for control/events in both directions.
Several commands were grouped under the same event type "command", with
a separate field to indicate the actual command.
Move these commands at the same level as other control events. It will
allow to implement commands with arguments.
If we don't do this trick, the prebuilt_server will be
../server/[the_user_defined_path]. In general, we will not give an relative path
based on build directory, which leads to wrong prebuilt_server path.
The building error:
ninja: error: '../scrcpy-server-v1.7.jar', needed by
'server/scrcpy-server.jar', missing and no known rule to make it
Signed-off-by: Yu-Chen Lin <npes87184@gmail.com>
Commit fefb9816a9 modified mouse events
serialization. The server-side parsing was updated to correctly read the
position, but the expected size of these events was not updated.
As a result, the server might try to parse incomplete events, leading
to BufferUnderflowException.
Fixes
<https://github.com/Genymobile/scrcpy/issues/350#issuecomment-456298816>.
To clean up the device, the client executed "adb shell rm" once the
server was guaranteed to be started (after the connection succeeded).
This implied to track whether the installation state, and failed if an
additional tunnel was used in "forward" mode:
<https://github.com/Genymobile/scrcpy/issues/386#issuecomment-453936034>
Instead, make the server unlink itself on start.
Mouse events position were unsigned (so negative values could not be
handled properly).
To avoid issues with negative values, mouse events outside the device
screen were ignored (commit a7fe9ad779).
But as a consequence, drag&drop were "broken" if the "drop" occurred
outside the device screen.
Instead, use signed 32-bits to store the position, and forward events
outside the device screen.
Fixes <https://github.com/Genymobile/scrcpy/issues/357>.
The client passes parameters to the server via "adb shell" arguments.
Use "-" instead of "" when no crop is specified to avoid empty
arguments, which are not handled the same way on all devices.
Fixed <https://github.com/Genymobile/scrcpy/issues/337>.
Configuration packets produced by MediaCodec have no valid PTS, and do
not produce frame. Do not queue their (invalid) PTS not to break the
matching between frames and their PTS.
Since PTS handling has been fixed, the recorder do not associate a PTS
to a wrong frame anymore, so PTS of "configuration packets" (which never
produce a frame), are never read by the recorder. Therefore, there is no
need to ignore them explicitly, so we can remove the MediaCodec flags
completely.
In "adb forward" mode, close the server socket as soon as the client is
connected.
Even if unlikely to be useful, it allows to run several instances of
scrcpy also in "adb forward" mode.
"adb reverse" currently does not work over tcpip (i.e. on a device
connected by "adb connect"):
<https://issuetracker.google.com/issues/37066218>
To work around the problem, if the call to "adb reverse" fails, then
fallback to "adb forward", and reverse the client/server roles.
Keep the "adb reverse" mode as the default because it does not involve
connection retries: when using "adb forward", the client must try to
connect successively until the server listens.
Due to the tunnel, every connect() will succeed, so the client must
attempt to read() to detect a connection failure. For this purpose, when
using the "adb forward" mode, the server initially writes a dummy byte,
read by the client.
Fixes <https://github.com/Genymobile/scrcpy/issues/5>.
The codec only supports dimensions which are multiple of 8.
Thus, when --max-size is specified, the value is always rounded down to
the nearest multiple of 8.
However, it was wrongly assumed that the physical size is always a
multiple of 8. To support such devices, also round down the physical
screen dimensions.
Fixes <https://github.com/Genymobile/scrcpy/issues/39>.
The text input control_event was initially designed for mapping
SDL_TextInputEvent, limited to 32 characters.
For simplicity, the copy/paste feature was implemented using the same
control_event: it just sends the text to paste.
However, the pasted text might have a length breaking some assumptions:
- on the client, the event max-size was smaller than the text
max-length,
- on the server, the raw buffer storing the events was smaller than the
max event size.
Fix these inconsistencies, and encode the length on 2 bytes, to accept
more than 256 characters.
Fixes <https://github.com/Genymobile/scrcpy/issues/10>.
Paste computer clipboard to the device on Ctrl+v.
The other direction (pasting the device clipboard to the computer) is
not implemented. It would require a communication channel from the
device to the computer, other than the socket used by the video stream.
No exception was thrown on EOF, so the event controller did not
terminate. This leaded to a further InvocationTargetException.
Instead, terminate the event controller on EOF, so that the process
terminates properly.
Expose a 'prebuilt_server' option to pass the path of the prebuilt
binary, so that the build does not require Android SDK.
Usage:
meson builddir -Dprebuilt_server=/tmp/my_prebuilt_server.jar
The custom target used to invoke Gradle from Meson should always
be built, otherwise, the server would not be rebuilt on source changes.
However, when enabling "build_always", gradle is invoked as root on
"sudo ninja install" after "ninja", so it downloads the whole Gradle
world into /root/.gradle.
To avoid the problem, just do not call gradle if the effective user id
is 0.
The client was built with Meson, the server with Gradle, and were run by
a Makefile.
Add a Meson script for the server (which delegates to Gradle), and a
parent script to build and install both the client and the server to the
system, typically with:
meson --buildtype release build
cd build
ninja
sudo ninja install
In addition, use a separate Makefile to build a "portable" version of
the application (where the client expects the server to be in the
current directory). Typically:
make release-portable
cd dist/scrcpy
./scrcpy
This is especially useful for Windows builds, which are not "installed".
Characters like 'é' or 'î' are not resolved by getEvents(). For example,
getEvents("é") returns null.
However, it is possible to decompose them. For example,
getEvents("\u0301e") returns the events generating "é".
Thank you Philippe! ;)
In handleEvent(), connection.receiveControlEvent() may never return
null: either it returns a valid ControlEvent, either it throws an
Exception.
Therefore, there is no need to propagate a flag to indicate whether it
returned a valid ControlEvent.
On some devices, we can reuse the same codec and display, but on some
others (e.g. Nexus 5X with Android 7.1.2), it crashes on codec.stop()
with an IllegalStateException.
Therefore, always recreate the codec and display, so that it works on
all devices.
The right-click is almost useless on Android, so use it to turn the
screen on.
Add a new control event type (command) to request the server to turn the
screen on.
Replace screenrecord execution by manual screen encoding using the
MediaCodec API.
The "screenrecord" solution had several drawbacks:
- screenrecord output is buffered, so tiny frames may not be accessible
immediately;
- it did not output a frame until the surface changed, leading to a
black screen on start;
- it is limited to 3 minutes recording, so it needed to be restarted;
- screenrecord added black borders in the video when the requested
dimensions did not preserve aspect-ratio exactly (sometimes
unavoidable since video dimensions must be multiple of 8);
- rotation handling was hacky (killing the process and starting a new
one).
Handling the encoding manually allows to solve all these problems.
Accept a parameter to limit the video size.
For instance, with "-m 960", the great side of the video will be scaled
down to 960 (if necessary), while the other side will be scaled down so
that the aspect ratio is preserved. Both dimensions must be a multiple
of 8, so black bands might be added, and the mouse positions must be
computed accordingly.
The video screen size on the client may differ from the real device
screen size (e.g. the video stream may be scaled down). As a
consequence, mouse events must be scaled to match the real device
coordinates.
For this purpose, make the client send the video screen size along with
the absolute pointer location, and the server scale the location to
match the real device size before injecting mouse events.
Currently, we only use screen information (width, height, rotation)
once at initialization, to send the device size to the client.
To be able to scale mouse events, make it accessible in memory. For this
purpose, replace the "static" DeviceUtil to a singleton Device, and
update it on every screen rotation.
To control the device from the computer:
- retrieve mouse and keyboard SDL events;
- convert them to Android events;
- serialize them;
- send them on the same socket used by the video stream (but in the
opposite direction);
- deserialize the events on the Android side;
- inject them using the InputManager.
Move the DeviceUtil internal static classes to public classes, in a
separate package (".wrappers").
This paves the way to implement InputManager properly.
