Cleanup is used for some options like --show-touches to restore the
state on exit.
If the configuration fails, do not crash the whole process. Just log an
error.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Before Android 8, executing the "settings" command from a shell was
very slow (~1 second), because it spawned a new app_process to execute
Java code. Therefore, to access settings without performance issues,
scrcpy used private APIs to read from and write to settings.
However, since Android 12, this is not possible anymore, due to
permissions changes.
To make it work again, execute the "settings" command on Android 12 (or
on previous version if the other method failed). This method is faster
than before Android 8 (~100ms).
Fixes#2671 <https://github.com/Genymobile/scrcpy/issues/2671>
Fixes#2788 <https://github.com/Genymobile/scrcpy/issues/2788>
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Settings read/write errors were silently ignored. Report them via a
SettingsException so that the caller can handle them.
This allows to log a proper error message, and will also allow to
fallback to a different settings method in case of failure.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Until now, the code that needed to read/write the Android settings had
to explicitly open and close a ContentProvider.
Wrap these details into a Settings class.
This paves the way to provide an alternative implementation of settings
read/write for Android >= 12.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Remove useless intermediate method with a "mode" parameter (it's always
called with the same mode).
This also avoids the need for a specific injectEventOnDisplay() method,
since it does not conflict with another injectEvent() method anymore.
Add a new mode to the --lock-video-orientation option, to lock the
initial orientation of the device.
This avoids to pass an explicit value (0, 1, 2 or 3) and think about
which is the right one.
The collapsing action collapses any panels.
By the way, the Android method is named collapsePanels().
PR #2260 <https://github.com/Genymobile/scrcpy/pull/2260>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The shortcut "back on screen on" is a bit special: the control is
requested by the client, but the actual event injection (POWER or BACK)
is determined on the device.
To properly inject DOWN and UP events for BACK, transmit the action as
a control parameter.
If the screen is off:
- on DOWN, inject POWER (DOWN and UP) (wake up the device immediately)
- on UP, do nothing
If the screen is on:
- on DOWN, inject BACK DOWN
- on UP, inject BACK UP
A corner case is when the screen turns off between the DOWN and UP
event. In that case, a BACK UP event will be injected, so it's harmless.
As a consequence of this change, the BACK button is now handled by
Android on mouse released. This is consistent with the keyboard shortcut
(Mod+b) behavior.
PR #2259 <https://github.com/Genymobile/scrcpy/pull/2259>
Refs #2258 <https://github.com/Genymobile/scrcpy/pull/2258>
The (non-daemon) threads were not interrupted on video stream stopped,
leaving the server process alive.
Interrupt them to wake up their blocking call so that they terminate
properly.
Refs #1992 <https://github.com/Genymobile/scrcpy/issues/1992>
This commit in AOSP framework_base added a parameter "attributionTag" to
the call() method:
12ac3f406f%5E%21/#F17
As a consequence, the method did not exist, so scrcpy used the legacy
call() method (using the authority "unknown") as a fallback, which fails
for security reasons.
Fixes#1468 <https://github.com/Genymobile/scrcpy/issues/1468>
The behavior of some methods do not depend on the user-provided options.
These methods can be static. This will allow to call them directly from
the cleanup process.
To avoid possible copy-paste loops between the computer and the device,
the device clipboard is not set if it already contains the expected
content.
But the condition was wrong: it was not set also if it was empty.
Refs 1223a72eb8Fixes#1658 <https://github.com/Genymobile/scrcpy/issues/1658>
Do not explicitly set the clipboard text if it already contains the
expected content. This avoids possible copy-paste loops between the
computer and the device.
When the client requests to set the clipboard, it may request to press
the PASTE key in addition. To be a bit generic, it was stored as a flag
in ControlMessage.java.
But flags suggest that it represents a bitwise union. Use a simple
boolean instead.
To power the device on, inject KEYCODE_WAKEUP to avoid a possible
race condition (the device might become off between the test
isScreenOn() and the POWER keycode injection).
In theory, this was expected to only happen when a touch event is sent
just before the device is rotated, but some devices do not respect the
encoding size, causing an unexpected mismatch.
Refs #1518 <https://github.com/Genymobile/scrcpy/issues/1518>
In practice, it does not change anything (it just avoids a spurious
wake-up), but semantically, it makes no sense to call
pushClipboardText() with a null value.
Clean up has been broken by 3df63c579d.
The verbosity was correctly initialized for the Server process, but not
for the CleanUp process.
To avoid the problem, initialize a default log level.
Only the main injection method was exposed on Device, the convenience
methods were implemented in Controller.
For consistency, move them all to the Device class.
The Android device listens for clipboard changes to synchronize with the
computer clipboard.
However, if the change comes from scrcpy (for example via Ctrl+Shift+v),
do not notify the change.
Scroll events were sent with a mouse input device. When scrolling on a
list, this could cause the whole list to be focused, and drawn with the
focus color as background.
Send scroll events with a touchscreen input device instead (like motion
events).
Fixes#1362 <https://github.com/Genymobile/scrcpy/issues/1362>
Now that the server can access the Android settings and clean up
properly, handle the "show touches" option from the server.
The initial state is now correctly restored, even on device
disconnection.
Expose methods to access the Android settings using private APIs.
This allows to read and write settings values immediately without
starting a new process to call "settings".
There are a lot of "magic numbers" that we really don't want to extract
as a constant.
Until now, many @SuppressWarnings annotations were added, but it makes
no sense to check for magic number if we silent the warnings everywhere.
Centralize video size management in ScreenInfo.
This allows to always send the correct initial video size to the client
if the video orientation is locked.
Some workarounds are needed on some devices. But applying them may cause
exceptions on other devices, where they are not necessary anyway.
Do not report these errors in release builds.
Closes#994 <https://github.com/Genymobile/scrcpy/issues/994>
Internally, a failure to invoke a method via reflection was partially
managed using exceptions, partially using a null return value.
Handle all errors at the same place, by not catching
NoSuchMethodException too early.
When an ApplicationInfo is set (commit
90293240cc), some devices (Nvidia Shield
TV) attempt to access the Application object, causing a
NullPointerException.
As a workaround, initialize an Application object.
Fixes <https://github.com/Genymobile/scrcpy/issues/940>
Commit 3da95b52bd renamed
'scrcpy-server.jar' to 'scrcpy-server' to avoid issues on the client
side.
However, removing the extension may cause issues with app_process, so
restore the extension only on the device side.
Fixes <https://github.com/Genymobile/scrcpy/issues/944>
The KEY_FRAME_RATE parameter value is necessary for the configuration of
the encoder, but its actual value does not impact the frame rate (only
resources used by the encoder).
Therefore, it's an internal detail and should not be exposed by the
ScreenEncoder class.
Send client version as first parameter and check it at server start.
Signed-off-by: Yu-Chen Lin <npes87184@gmail.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Some devices internally create a Handler when creating an input Surface,
causing an exception:
> Surface: java.lang.RuntimeException: Can't create handler inside
> thread that has not called Looper.prepare()
As a workaround, call Looper.prepareMainLooper() beforehand.
Fixes:
- <https://github.com/Genymobile/scrcpy/issues/240>
- <https://github.com/Genymobile/scrcpy/issues/921>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Some devices do not have some methods that we invoke via reflection, or
their call do not return the expected value. In that case, do not crash
the whole controller.
Add two shortcuts:
- Ctrl+o to turn the device screen off while mirroring
- Ctrl+Shift+o to turn it back on
On power on (either via the POWER key or BACK while screen is off), both
the device screen and the mirror are turned on.
<https://github.com/Genymobile/scrcpy/issues/175>
After the recent refactorings, a "control event" is not necessarily an
"event" (it may be a "command"). Similarly, the unique "device event"
used to send the device clipboard content is more a "reponse" to the
request from the client than an "event".
Rename both to "message", and rename the message types to better
describe their intent.
It was already possible to _paste_ (with Ctrl+v) the content of the
computer clipboard on the device. Technically, it injects a sequence of
events to generate the text.
Add a new feature (Ctrl+Shift+v) to copy to the device clipboard
instead, without injecting the content. Contrary to events injection,
this preserves the UTF-8 content exactly, so the text is not broken by
special characters.
<https://github.com/Genymobile/scrcpy/issues/413>
Parsing a String from a serialized control event, encoded as length (2
bytes) + data, will be necessary in several events.
Extract it to a separate method.
On Ctrl+C:
- the client sends a GET_CLIPBOARD command to the device;
- the device retrieve its current clipboard text and sends it in a
GET_CLIPBOARD device event;
- the client sets this text as the system clipboard text, so that it
can be pasted in another application.
Fixes <https://github.com/Genymobile/scrcpy/issues/145>
The socket used the device-to-computer direction to stream the video and
the computer-to-device direction to send control events.
Some features, like copy-paste from device to computer, require to send
non-video data from the device to the computer.
To make them possible, use two sockets:
- one for streaming the video from the device to the client;
- one for control/events in both directions.
Several commands were grouped under the same event type "command", with
a separate field to indicate the actual command.
Move these commands at the same level as other control events. It will
allow to implement commands with arguments.
Commit fefb9816a9 modified mouse events
serialization. The server-side parsing was updated to correctly read the
position, but the expected size of these events was not updated.
As a result, the server might try to parse incomplete events, leading
to BufferUnderflowException.
Fixes
<https://github.com/Genymobile/scrcpy/issues/350#issuecomment-456298816>.
To clean up the device, the client executed "adb shell rm" once the
server was guaranteed to be started (after the connection succeeded).
This implied to track whether the installation state, and failed if an
additional tunnel was used in "forward" mode:
<https://github.com/Genymobile/scrcpy/issues/386#issuecomment-453936034>
Instead, make the server unlink itself on start.
Mouse events position were unsigned (so negative values could not be
handled properly).
To avoid issues with negative values, mouse events outside the device
screen were ignored (commit a7fe9ad779).
But as a consequence, drag&drop were "broken" if the "drop" occurred
outside the device screen.
Instead, use signed 32-bits to store the position, and forward events
outside the device screen.
Fixes <https://github.com/Genymobile/scrcpy/issues/357>.
The client passes parameters to the server via "adb shell" arguments.
Use "-" instead of "" when no crop is specified to avoid empty
arguments, which are not handled the same way on all devices.
Fixed <https://github.com/Genymobile/scrcpy/issues/337>.
Configuration packets produced by MediaCodec have no valid PTS, and do
not produce frame. Do not queue their (invalid) PTS not to break the
matching between frames and their PTS.
Since PTS handling has been fixed, the recorder do not associate a PTS
to a wrong frame anymore, so PTS of "configuration packets" (which never
produce a frame), are never read by the recorder. Therefore, there is no
need to ignore them explicitly, so we can remove the MediaCodec flags
completely.
In "adb forward" mode, close the server socket as soon as the client is
connected.
Even if unlikely to be useful, it allows to run several instances of
scrcpy also in "adb forward" mode.
"adb reverse" currently does not work over tcpip (i.e. on a device
connected by "adb connect"):
<https://issuetracker.google.com/issues/37066218>
To work around the problem, if the call to "adb reverse" fails, then
fallback to "adb forward", and reverse the client/server roles.
Keep the "adb reverse" mode as the default because it does not involve
connection retries: when using "adb forward", the client must try to
connect successively until the server listens.
Due to the tunnel, every connect() will succeed, so the client must
attempt to read() to detect a connection failure. For this purpose, when
using the "adb forward" mode, the server initially writes a dummy byte,
read by the client.
Fixes <https://github.com/Genymobile/scrcpy/issues/5>.
The codec only supports dimensions which are multiple of 8.
Thus, when --max-size is specified, the value is always rounded down to
the nearest multiple of 8.
However, it was wrongly assumed that the physical size is always a
multiple of 8. To support such devices, also round down the physical
screen dimensions.
Fixes <https://github.com/Genymobile/scrcpy/issues/39>.
The text input control_event was initially designed for mapping
SDL_TextInputEvent, limited to 32 characters.
For simplicity, the copy/paste feature was implemented using the same
control_event: it just sends the text to paste.
However, the pasted text might have a length breaking some assumptions:
- on the client, the event max-size was smaller than the text
max-length,
- on the server, the raw buffer storing the events was smaller than the
max event size.
Fix these inconsistencies, and encode the length on 2 bytes, to accept
more than 256 characters.
Fixes <https://github.com/Genymobile/scrcpy/issues/10>.
Paste computer clipboard to the device on Ctrl+v.
The other direction (pasting the device clipboard to the computer) is
not implemented. It would require a communication channel from the
device to the computer, other than the socket used by the video stream.
