The PTS received from MediaCodec are expressed relative to an arbitrary
clock origin. We consider the PTS of the first frame to be 0, and the
PTS of every other frame is relative to this first PTS (note that the
PTS is only used for recording, it is ignored for mirroring).
For simplicity, this relative PTS was computed on the server-side.
To prepare support for multiple stream (video and audio), send the
packet with its original PTS, and handle the PTS offset on the
client-side (by the recorder).
Since we can't know in advance which stream will produce the first
packet with the lowest PTS (a packet received later on one stream may
have a PTS lower than a packet received earlier on another stream),
computing the PTS on the server-side would require unnecessary waiting.
On mouse click events:
- the first button pressed must first generate ACTION_DOWN;
- all button pressed (including the first one) must generate
ACTION_BUTTON_PRESS;
- all button released (including the last one) must generate
ACTION_BUTTON_RELEASE;
- the last button released must in addition generate ACTION_UP.
Otherwise, Chrome does not work properly.
Fixes#3635 <https://github.com/Genymobile/scrcpy/issues/3635>
Signed-off-by: Romain Vimont <rom@rom1v.com>
If the pointer is a mouse, the pointer is UP only when no buttons are
pressed (not when a button is released, because there might be other
buttons still pressed).
Refs #3635 <https://github.com/Genymobile/scrcpy/issues/3635>
Signed-off-by: Romain Vimont <rom@rom1v.com>
On click event, only the whole buttons state was passed to the device.
In addition, on ACTION_DOWN and ACTION_UP, pass the button associated to
the action.
Refs #3635 <https://github.com/Genymobile/scrcpy/issues/3635>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
MediaCodec may fail spuriously, typically when stopping an encoding and
starting a new one immediately (for example on device rotation).
In that case, retry a few times, in many cases it should work.
Refs #3693 <https://github.com/Genymobile/scrcpy/issues/3693>
For the initial connection between the device and the computer, an adb
tunnel is established (with "adb reverse" or "adb forward").
The device-side of the tunnel is a local socket having the hard-coded
name "scrcpy". This may cause issues when several scrcpy instances are
started in a few seconds for the same device, since they will try to
bind the same name.
To avoid conflicts, make the client generate a random UID, and append
this UID to the local socket name ("scrcpy_01234567").
Right click and middle click require the source device to be a mouse,
not a touchscreen. Therefore, the source device was changed only when a
button other than the primary button was pressed (see
adc547fa6e).
However, this led to inconsistencies between the ACTION_DOWN when a
secondary button is pressed (with a mouse as source device) and the
matching ACTION_UP when the secondary button is released (with a
touchscreen as source device, because then there is no button pressed).
To avoid the problem in all cases, force a mouse as source device when
--forward-all-clicks is set.
Concretely, for mouse events in --forward-all-clicks mode:
- device source is set to InputDevice.SOURCE_MOUSE;
- motion event toolType is set to MotionEvent.TOOL_TYPE_MOUSE;
Otherwise (when --forward-all-clicks is unset, or for real touch
events), finger events are injected:
- device source is set to InputDevice.SOURCE_TOUCHSCREEN;
- motion event toolType is set to MotionEvent.TOOL_TYPE_FINGER.
Fixes#3568 <https://github.com/Genymobile/scrcpy/issues/3568>
PR #3579 <https://github.com/Genymobile/scrcpy/pull/3579>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
There were exactly one instance of ServiceManager and Settings, stored
in Device.
Since a Device instance is not created by the CleanUp executable, it was
not straightforward to call wrapper methods on cleanup.
Remove this artificial restriction and expose them publicly via static
methods (this is equivalent to expose a singleton, but less verbose).
The previous commit replaced the IInterface instance (the "input"
service) by the InputManager instance (retrieved by
InputManager.getInstance()).
Both define an "injectInputEvent" method, but the alternate version
(probably) does not concern the InputManager.
This reverts commit b7a06278fe.
PR #3190 <https://github.com/Genymobile/scrcpy/pull/3190>
A special PTS value was used to encode a config packet.
To prepare for adding more flags, use the most significant bits of the
PTS field to store flags.
The new retry mechanism with a lower definition only worked if the error
occurred during encode(). For example:
java.lang.IllegalStateException
at android.media.MediaCodec.native_dequeueOutputBuffer(Native Method)
at android.media.MediaCodec.dequeueOutputBuffer(MediaCodec.java:3452)
at com.genymobile.scrcpy.ScreenEncoder.encode(ScreenEncoder.java:114)
at com.genymobile.scrcpy.ScreenEncoder.internalStreamScreen(ScreenEncoder.java:95)
at com.genymobile.scrcpy.ScreenEncoder.streamScreen(ScreenEncoder.java:61)
at com.genymobile.scrcpy.Server.scrcpy(Server.java:80)
at com.genymobile.scrcpy.Server.main(Server.java:255)
However, MediaCodec may also fail before encoding, during configure() or
start(). For example:
android.media.MediaCodec$CodecException: Error 0xfffffc0e
at android.media.MediaCodec.native_configure(Native Method)
at android.media.MediaCodec.configure(MediaCodec.java:1956)
at android.media.MediaCodec.configure(MediaCodec.java:1885)
at com.genymobile.scrcpy.ScreenEncoder.configure(ScreenEncoder.java:158)
at com.genymobile.scrcpy.ScreenEncoder.streamScreen(ScreenEncoder.java:68)
at com.genymobile.scrcpy.Server.scrcpy(Server.java:28)
at com.genymobile.scrcpy.Server.main(Server.java:110)
Also downscale and retry in these cases.
Refs #2947 <https://github.com/Genymobile/scrcpy/pull/2947>
Refs #2988 <https://github.com/Genymobile/scrcpy/issues/2988>
PR #2990 <https://github.com/Genymobile/scrcpy/pull/2990>
For convenience, this new option forces the 3 following options:
- send_device_meta=false
- send_frame_meta=false
- send_dummy_byte=false
This allows to send a raw H.264 stream on the video socket.
Concretely:
adb push scrcpy-server /data/local/tmp/scrcpy-server.jar
adb forward tcp:1234 localabstract:scrcpy
adb shell CLASSPATH=/data/local/tmp/scrcpy-server.jar \
app_process / com.genymobile.scrcpy.Server 1.21 \
raw_video_stream=true tunnel_forward=true control=false
As soon as a client connects via TCP to localhost:1234, it will receive
the raw H.264 stream.
Refs #1419 comment <https://github.com/Genymobile/scrcpy/pull/1419#issuecomment-1013964650>
PR #2971 <https://github.com/Genymobile/scrcpy/pull/2971>
Similar to send_device_frame, this option allows to disable sending the
device name and size on start.
This is only useful when using the scrcpy-server alone to get a raw
H.264 stream, without using the scrcpy client.
PR #2971 <https://github.com/Genymobile/scrcpy/pull/2971>
Move the options unused by the scrcpy client at the end.
These options may be useful to use scrcpy-server directly (to get a raw
H.264 stream for example).
PR #2971 <https://github.com/Genymobile/scrcpy/pull/2971>
Retry with a lower definition if MediaCodec fails before the first
frame, not the first packet.
In practice, the first packet is a config packet without any frame, and
MediaCodec might fail just after.
Refs 2eb6fe7d81
Refs #2963 <https://github.com/Genymobile/scrcpy/issues/2963>
MediaCodec errors always trigger IllegalStateException or a subtype
(like MediaCodec.CodecException).
In practice, this avoids to retry if the error is caused by an
IOException when writing the video packet to the socket.
The purpose of automatic downscaling on error is to make mirroring work
by just starting scrcpy without an explicit -m value, even if the
encoder could not encode at the screen definition.
It is only useful when we detect an encoding failure before the first
frame. Downsizing later could be surprising, so disable it.
PR #2947 <https://github.com/Genymobile/scrcpy/pull/2947>
Now that scrcpy attempts with a lower definition on any MediaCodec
error (or the user explicitly requests to disable auto-downsizing), the
suggestion is unnecessary.
PR #2947 <https://github.com/Genymobile/scrcpy/pull/2947>
Some devices are not able to encode at the device screen definition.
Instead of just failing, try with a lower definition on any MediaCodec
error.
PR #2947 <https://github.com/Genymobile/scrcpy/pull/2947>
A scroll event might be produced when a mouse button is pressed (for
example when scrolling while selecting a text). For consistency, pass
the actual buttons state (instead of 0).
In practice, it seems that this use case does not work properly with
Android event injection, but it will work with HID mouse.
If --no-control is enabled, then it is not necessary to create a second
communication socket between the client and the server.
This also facilitates the use of the server alone (without the client)
to receive only the raw video stream.
Expose the inject input event mode so that it is possible to wait for
the events to be "finished". This will be necessary to read the
clipboard content only after the COPY or CUT key event is handled.
PR #2834 <https://github.com/Genymobile/scrcpy/pull/2834>
The options values to configure the server were identified by their
command-line argument index. Now that there are a lot of arguments, many
of them being booleans, it became unreadable and error-prone.
Identify the arguments by a key string instead, and make them optional.
This will also simplify running the server manually for debugging.
Cleanup is used for some options like --show-touches to restore the
state on exit.
If the configuration fails, do not crash the whole process. Just log an
error.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Before Android 8, executing the "settings" command from a shell was
very slow (~1 second), because it spawned a new app_process to execute
Java code. Therefore, to access settings without performance issues,
scrcpy used private APIs to read from and write to settings.
However, since Android 12, this is not possible anymore, due to
permissions changes.
To make it work again, execute the "settings" command on Android 12 (or
on previous version if the other method failed). This method is faster
than before Android 8 (~100ms).
Fixes#2671 <https://github.com/Genymobile/scrcpy/issues/2671>
Fixes#2788 <https://github.com/Genymobile/scrcpy/issues/2788>
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Settings read/write errors were silently ignored. Report them via a
SettingsException so that the caller can handle them.
This allows to log a proper error message, and will also allow to
fallback to a different settings method in case of failure.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Until now, the code that needed to read/write the Android settings had
to explicitly open and close a ContentProvider.
Wrap these details into a Settings class.
This paves the way to provide an alternative implementation of settings
read/write for Android >= 12.
PR #2802 <https://github.com/Genymobile/scrcpy/pull/2802>
Make the versionCode a decimal representation of the scrcpy version.
This will for example allow to correctly number the versionCode of
v1.17.1 after a v1.18 is released:
- v1.18 -> 11800
- v1.17.1 -> 11701
- v1.18.1 -> 11801
Remove useless intermediate method with a "mode" parameter (it's always
called with the same mode).
This also avoids the need for a specific injectEventOnDisplay() method,
since it does not conflict with another injectEvent() method anymore.
Add a new mode to the --lock-video-orientation option, to lock the
initial orientation of the device.
This avoids to pass an explicit value (0, 1, 2 or 3) and think about
which is the right one.
The collapsing action collapses any panels.
By the way, the Android method is named collapsePanels().
PR #2260 <https://github.com/Genymobile/scrcpy/pull/2260>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The shortcut "back on screen on" is a bit special: the control is
requested by the client, but the actual event injection (POWER or BACK)
is determined on the device.
To properly inject DOWN and UP events for BACK, transmit the action as
a control parameter.
If the screen is off:
- on DOWN, inject POWER (DOWN and UP) (wake up the device immediately)
- on UP, do nothing
If the screen is on:
- on DOWN, inject BACK DOWN
- on UP, inject BACK UP
A corner case is when the screen turns off between the DOWN and UP
event. In that case, a BACK UP event will be injected, so it's harmless.
As a consequence of this change, the BACK button is now handled by
Android on mouse released. This is consistent with the keyboard shortcut
(Mod+b) behavior.
PR #2259 <https://github.com/Genymobile/scrcpy/pull/2259>
Refs #2258 <https://github.com/Genymobile/scrcpy/pull/2258>
The (non-daemon) threads were not interrupted on video stream stopped,
leaving the server process alive.
Interrupt them to wake up their blocking call so that they terminate
properly.
Refs #1992 <https://github.com/Genymobile/scrcpy/issues/1992>
This should increase the portability of bash scripts across various *nix
systems such as BSD-like distributions.
PR #1716 <https://github.com/Genymobile/scrcpy/pull/1716>
Signed-off-by: Luís Ferreira <contact@lsferreira.net>
Signed-off-by: Romain Vimont <rom@rom1v.com>
This commit in AOSP framework_base added a parameter "attributionTag" to
the call() method:
12ac3f406f%5E%21/#F17
As a consequence, the method did not exist, so scrcpy used the legacy
call() method (using the authority "unknown") as a fallback, which fails
for security reasons.
Fixes#1468 <https://github.com/Genymobile/scrcpy/issues/1468>
The behavior of some methods do not depend on the user-provided options.
These methods can be static. This will allow to call them directly from
the cleanup process.
To avoid possible copy-paste loops between the computer and the device,
the device clipboard is not set if it already contains the expected
content.
But the condition was wrong: it was not set also if it was empty.
Refs 1223a72eb8Fixes#1658 <https://github.com/Genymobile/scrcpy/issues/1658>
Do not explicitly set the clipboard text if it already contains the
expected content. This avoids possible copy-paste loops between the
computer and the device.
