Commit graph

1295 commits

Author SHA1 Message Date
Romain Vimont
839b842aa7 Add --audio-codec
Introduce the selection mechanism. Alternative codecs will be added
later.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
0870b8c8be Add --audio-bit-rate
Add an option to configure the audio bit-rate.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
e694619d53 Rename --encoder to --video-encoder
This prepares the introduction of --audio-encoder.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
31555fa530 Rename --codec-options to --video-codec-options
This prepares the introduction of --audio-codec-options.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
9087e85c3f Rename --bit-rate to --video-bit-rate
This prepares the introduction of --audio-bit-rate.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
cee40ca047 Rename --codec to --video-codec
This prepares the introduction of --audio-codec.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
a1802dab76 Remove default bit-rate on client side
If no bit-rate is passed, let the server use the default value (8Mbps).

This avoids to define a default value on both sides, and to pass the
default bit-rate as an argument when starting the server.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
17d5301c0f Record at least video packets on stop
If the recorder is stopped while it has not received any audio packet
yet, make sure the video stream is correctly recorded.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
13a3395a33 Disable audio on initialization error
By default, audio is enabled (--no-audio must be explicitly passed to
disable it).

However, some devices may not support audio capture (typically devices
below Android 11, or Android 11 when the shell application is not
foreground on start).

In that case, make the server notify the client to dynamically disable
audio forwarding so that it does not wait indefinitely for an audio
stream.

Also disable audio on unknown codec or missing decoder on the
client-side, for the same reasons.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
7de0622214 Add audio recording support
Make the recorder accept two input sources (video and audio), and mux
them into a single file.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
3d29f6ef06 Rename video-specific variables in recorder
This paves the way to add audio-specific variables.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
609b098a97 Do not merge config audio packets
For video streams (at least H.264 and H.265), the config packet
containing SPS/PPS must be prepended to the next packet (the following
keyframe).

For audio streams (at least OPUS), they must not be merged.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
de430bc4aa Add an audio demuxer
Add a demuxer which will read the stream from the audio socket.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
f60b5767f4 Force --no-audio if no display and no recording
The client does not use the audio stream if there is no display and no
recording (i.e. only V4L2), so disable audio so that the device does not
attempt to capture it.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
d499f890e7 Give a name to demuxer instances
This will be useful in logs.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
e9876788c9 Rename demuxer to video_demuxer
There will be another demuxer instance for audio.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Simon Chan
e841241a8e Add a new socket for audio stream
When audio is enabled, open a new socket to send the audio stream from
the device to the client.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2023-03-10 22:22:15 +01:00
Simon Chan
3cf03e4a4b Add --no-audio option
Audio will be enabled by default (when supported). Add an option to
disable it.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2023-03-10 22:22:15 +01:00
Romain Vimont
ef6a3b97a7 Reorder initialization
Initialize components in the pipeline order: demuxer first, decoder and
recorder second.
2023-03-10 22:22:15 +01:00
Romain Vimont
f9efe48aac Refactor recorder logic
Process the initial config packet (necessary to write the header)
separately.
2023-03-10 22:22:15 +01:00
Romain Vimont
4b246cd963 Move last packet recording
Write the last packet at the end.
2023-03-10 22:22:15 +01:00
Romain Vimont
3c407773e9 Add start() function for recorder
For consistency with the other components, do not start the internal
thread from an init() function.
2023-03-10 22:22:15 +01:00
Romain Vimont
a039124d5d Open recording file from the recorder thread
The recorder opened the target file from the packet sink open()
callback, called by the demuxer. Only then the recorder thread was
started.

One golden rule for the recorder is to never block the demuxer for I/O,
because it would impact mirroring. This rule is respected on recording
packets, but not for the initial recorder opening.

Therefore, start the recorder thread from sc_recorder_init(), open the
file immediately from the recorder thread, then make it wait for the
stream to start (on packet sink open()).

Now that the recorder can report errors directly (rather than making the
demuxer call fail), it is possible to report file opening error even
before the packet sink is open.
2023-03-10 22:22:15 +01:00
Romain Vimont
6b5dfef923 Inline packet_sink impl in recorder
Remove useless wrappers.
2023-03-10 22:22:15 +01:00
Romain Vimont
fb29135591 Initialize recorder fields from init()
The recorder has two initialization phases: one to initialize the
concrete recorder object, and one to open its packet_sink trait.

Initialize mutex and condvar as part of the object initialization.

If there were several packet_sink traits (spoiler: one for video, one
for audio), then the mutex and condvar would still be initialized only
once.
2023-03-10 22:22:15 +01:00
Romain Vimont
b1b33e3eaf Report recorder errors
Stop scrcpy on recorder errors.

It was previously indirectly stopped by the demuxer, which failed to
push packets to a recorder in error. Report it directly instead:
 - it avoids to wait for the next demuxer call;
 - it will allow to open the target file from a separate thread and stop
   immediately on any I/O error.
2023-03-10 22:22:15 +01:00
Romain Vimont
db5751a76a Move previous packet to a local variable
It is only used from run_recorder().
2023-03-10 22:22:15 +01:00
Romain Vimont
b6744e7887 Move pts_origin to a local variable
It is only used from run_recorder().
2023-03-10 22:22:15 +01:00
Romain Vimont
181fb555bb Change PTS origin type from uint64_t to int64_t
It is initialized from AVPacket.pts, which is an int64_t.
2023-03-10 22:22:15 +01:00
Romain Vimont
fa99763668 Fix --encoder documentation
Mention that it depends on the codec provided by --codec (which is not
necessarily H264 anymore).
2023-03-10 22:22:15 +01:00
Romain Vimont
9f8e96e895 Fix --no-clipboard-autosync bash completion
Fix typo.
2023-03-10 22:22:15 +01:00
Romain Vimont
c78254fcd1 Split server stop() and join()
For consistency with the other components, call stop() and join()
separately.

This allows to stop all components, then join them all.
2023-03-10 22:22:15 +01:00
Romain Vimont
e30e692b36 Print FFmpeg logs
FFmpeg logs are redirected to a specific SDL log category.

Initialize the log level for this category to print them as expected.
2023-03-10 22:22:15 +01:00
Romain Vimont
10e8295aea Move FFmpeg callback initialization
Configure FFmpeg log redirection on start from a log helper.
2023-03-10 22:22:15 +01:00
Romain Vimont
f30fd963a1 Upgrade FFmpeg custom builds for Windows
Use a build which includes the pcm_s16le decoder, to support RAW audio.

Refs <https://github.com/rom1v/scrcpy-deps/commits/6.0-scrcpy-2>
2023-03-10 22:22:15 +01:00
Romain Vimont
9d60d7880b Upgrade FFmpeg (6.0) for Windows
Use the latest version (specifically built for scrcpy).

Refs <https://www.ffmpeg.org/download.html#release_6.0>
2023-03-10 22:22:15 +01:00
Romain Vimont
0fc62bfcd6 Use minimal prebuilt FFmpeg for Windows
On the scrcpy-deps repo, I built FFmpeg 5.1.2 binaries for Windows with
only the features used by scrcpy.

For comparison, here are the sizes of the dll for FFmpeg 5.1.2:
 - before: 89M
 - after: 4.7M

It also allows to upgrade the old FFmpeg version (4.3.1) used for win32.

Refs <https://github.com/rom1v/scrcpy-deps>
Refs <https://github.com/Genymobile/scrcpy/issues/1753>
2023-03-10 22:22:15 +01:00
Romain Vimont
a20615066d Simplify libusb prebuilt scripts
In theory, include/ might be slightly different for win32 and win64
builds. Use each one separately to simplify.
2023-03-10 22:22:15 +01:00
Romain Vimont
b5d41ad4f6 Fix useless garbage initialization
The variable `p` was initialized with a garbage value (a `const char **`
casted to `char *`). Fortunately, it was never read.

Refs <https://github.com/Genymobile/scrcpy/issues/3765>
2023-03-03 11:12:31 +01:00
Romain Vimont
389dd77b50 Fix MIN/MAX macros
Expressions like "x < MAX(y, z)" were broken.
2023-03-03 01:18:10 +01:00
Romain Vimont
3c3c07db05 Initialize server->serial in all cases
Running scrcpy --tcpip on a device already connected via TCP/IP did not
initialize server->serial.

As a consequence, in debug mode, an assertion failed:

    scrcpy: ../app/src/server.c:770: run_server: Assertion
    `server->serial' failed.

In release mode, scrcpy failed with this error:

    adb: -s requires an argument
2023-02-28 12:34:34 +01:00
Romain Vimont
6b422e21bf Fix error message on icon loading failure 2023-02-27 20:51:54 +01:00
Romain Vimont
8e8b039a63 Do not use avformat network
Scrcpy does not use FFmpeg network features. Initialize network locally
instead (useful only for Windows).

The include block has been moved to fix the following warning:

    Please include winsock2.h before windows.h
2023-02-27 20:51:54 +01:00
Romain Vimont
0702be86d8 Accept Windows Sockets from version 1.1
Version 2.2 is probably not necessary (1.1 is the version required by
FFmpeg when network is enabled).

Refs <891ed24f77/libavformat/network.c (L63)>
Refs <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-wsastartup>
2023-02-27 20:51:54 +01:00
Romain Vimont
0cea7fb24c Fix WSAStartup() error check on Windows 2023-02-27 20:51:35 +01:00
Romain Vimont
3d10fbd9b4 Fix --bit-rate option in bash completion script
The option is --bit-rate, not --bitrate.
2023-02-21 19:50:01 +01:00
Romain Vimont
3e3756a323 Add auto-completion for --codec option
Add missing command to bash and zsh completion scripts.
2023-02-21 19:48:28 +01:00
Romain Vimont
5d6bcc5966 Use enum for long options constants
This avoids to manually assign values.
2023-02-21 19:47:27 +01:00
Romain Vimont
5973d4cdd7 Initialize mouse_input_mode explicitly
The explicit initialization was missing. It had no consequences because
SC_MOUSE_INPUT_MODE_INJECT == 0.

Fixes #3749 <https://github.com/Genymobile/scrcpy/issues/3749>
2023-02-21 12:11:39 +01:00
Romain Vimont
0a151b96fe Accept muxing AV1 into MP4 container
MP4 supports AV1.

Refs d2dce51038
2023-02-20 20:49:56 +01:00