Commit graph

2006 commits

Author SHA1 Message Date
Romain Vimont
089378926b Rename SCRCPY_SERVER_JAR to SCRCPY_SERVER_PATH
The server is currently a JAR, but it may ba an APK or a DEX, so the
variable name should not contain the type.

Rename the environment variable, the Meson options and the C
definitions.
2018-02-16 15:36:25 +01:00
Romain Vimont
60f3185185 Reuse server address
Set SO_REUSEADDR flag to server socket, so that bind() does not fail if
we restart scrcpy immediately after we closed the previous one.
2018-02-16 15:36:25 +01:00
Romain Vimont
6db22ef339 Log socket errors
Do not silently ignore close() and shutdown() errors, and use perror()
to get the errno.
2018-02-16 15:03:50 +01:00
Romain Vimont
37af0c8076 Terminate event controller thread on EOF
No exception was thrown on EOF, so the event controller did not
terminate. This leaded to a further InvocationTargetException.

Instead, terminate the event controller on EOF, so that the process
terminates properly.
2018-02-16 14:13:13 +01:00
Romain Vimont
ad6209f6ff Terminate the device process gracefully
Call shutdown() on the device socket to make the device process finish
its execution quickly and gracefully, without killing it.
2018-02-16 11:47:42 +01:00
Romain Vimont
a791c272bc Send and recv all data when necessary
Expose net_recv_all() and net_send_all(), equivalent of net_recv() and
net_send(), but that waits/retries until the requested length has been
transferred.

Use these new functions where it was (wrongly) assumed that the
requested length had been transferred.
2018-02-16 00:57:48 +01:00
Romain Vimont
d646f95a31 Avoid division by 0
If the frame_size width or height is 0, just return the current size to
avoid calculations involving divison by 0.
2018-02-16 00:57:48 +01:00
Romain Vimont
27b9159b07 Cleanup old code comment 2018-02-16 00:57:48 +01:00
Romain Vimont
cf59d49d25 Detect failure of device information read
If the received data is smaller than the device information size, then
something is wrong.
2018-02-16 00:57:47 +01:00
Romain Vimont
9b056f5091 Replace SDL_net by custom implementation
SDL_net is not very suitable for scrcpy.

For example, SDLNet_TCP_Accept() is non-blocking, so we have to wrap it
by calling many SDL_Net-specific functions to make it blocking.

But above all, SDLNet_TCP_Open() is a server socket only when no IP is
provided; otherwise, it's a client socket. Therefore, it is not possible
to create a server socket bound to localhost, so it accepts connections
from anywhere.

This is a problem for scrcpy, because on start, the application listens
for nearly 1 second until it accepts the first connection, supposedly
from the device. If someone on the local network manages to connect to
the server socket first, then they can stream arbitrary H.264 video.
This may be troublesome, for example during a public presentation ;-)

Provide our own simplified API (net.h) instead, implemented for the
different platforms.
2018-02-16 00:56:58 +01:00
Romain Vimont
bf41e5479b Improve decoder stopped event
The syntax was correct, but less readable, and it unnecessarily zeroed
the fields other than "type".

Create the event properly, from a separate method.
2018-02-15 22:59:04 +01:00
Romain Vimont
518d6d5dcd Prevent new window opening with CreateProcess()
Executing commands (like "adb push") created a new terminal window on
Windows. Avoid it.
2018-02-15 22:42:37 +01:00
Romain Vimont
e8cad790a4 Reword Ctrl+x description
Pressing Ctrl+x resizes the window to remove black borders, "optimal" is
not well-defined.
2018-02-15 14:04:48 +01:00
Romain Vimont
5ebf31d483 Remove useless screen render on initialization
screen_render() should not be called on initialization:
 1. it is useless, since the window is hidden until the first frame;
 2. it writes an empty texture (probably green) to the renderer.
2018-02-15 13:42:31 +01:00
Romain Vimont
d977202224 Add Ctrl+i shortcut to enable/disable FPS counter
Disable FPS counter on start, and use Ctrl+i to enable/disable it.
2018-02-15 12:24:16 +01:00
Romain Vimont
000ced9ba8 Refactor screencontrol to inputmanager
The "screen control" handled user input, which happened to be only
used to control the screen.

The controller and screen were passed to every function. Instead, group
them in a struct input_manager.

The purpose is to add a new shortcut to enable/disable FPS counter. This
feature is not related to "screen control", and will require access to
the "frames" instance.
2018-02-15 12:07:47 +01:00
Romain Vimont
fb0e467585 Add description for meson options
The descriptions are displayed in the result of:

    mesonconf builddir
2018-02-15 11:28:19 +01:00
Romain Vimont
42882702d7 Expose skip_frames as a build option
It can be initially configured by:

    meson builddir -Dskip_frames=false

Or on an existing builddir by:

    mesonconf builddir -Dskip_frames=false
2018-02-15 11:24:18 +01:00
Romain Vimont
38e6682875 Add FPS counter
Remove frame counter from scrcpy.c and add a new FPS counter, logging as
INFO the measured frame rate every second (on new frame).
2018-02-15 11:22:48 +01:00
Romain Vimont
c6c17af840 Do not print usage on command error
On error, a message is printed. If we print usage afterwards, it's easy
to miss it.
2018-02-14 19:01:26 +01:00
Romain Vimont
8697659890 Expose device serial as an optional argument
The device serial was provided as a positional argument:

    scrcpy 0123456789abcdef

Instead, expose it as an optional argument, -s or --serial:

    scrcpy -s 0123456789abcdef

This avoids inconsistency between platforms when the positional
argument is passed before the options (which is undefined).
2018-02-14 18:57:29 +01:00
Romain Vimont
23d92a95b6 Extract argument parsing to specific functions
To avoid a big switch/case, implement the argument parsing logic in
separate static functions.
2018-02-14 18:53:16 +01:00
Romain Vimont
111068d733 Use SDL_bool return to indicate success
For clarity and consistency across the application, return SDL_TRUE
(instead of 0) on success and SDL_FALSE on failure (instead of
non-zero).
2018-02-14 18:44:28 +01:00
Romain Vimont
d3c76c004e Sort parameters by letter
For readability, sort the command-line arguments parsing by letter.
2018-02-14 18:39:46 +01:00
Romain Vimont
9a07b694f1 Add run script
Add a script to simplify the execution of scrcpy generated in a specific
build directory.

To run scrcpy generated in builddir, with a video size of 1024:

    ./run builddir -m 1024
2018-02-14 18:31:42 +01:00
Romain Vimont
07983d914f Accept prebuilt server
Expose a 'prebuilt_server' option to pass the path of the prebuilt
binary, so that the build does not require Android SDK.

Usage:

    meson builddir -Dprebuilt_server=/tmp/my_prebuilt_server.jar
2018-02-14 16:28:21 +01:00
Romain Vimont
0efa9305eb Require Meson 0.37
Older versions of Meson are too limited, and it's simple to install a
newer version ("pip3 install meson").
2018-02-14 14:03:56 +01:00
Romain Vimont
4c49b27e9f Always invoke gradle except as root
The custom target used to invoke Gradle from Meson should always
be built, otherwise, the server would not be rebuilt on source changes.

However, when enabling "build_always", gradle is invoked as root on
"sudo ninja install" after "ninja", so it downloads the whole Gradle
world into /root/.gradle.

To avoid the problem, just do not call gradle if the effective user id
is 0.
2018-02-14 14:03:56 +01:00
Romain Vimont
c2127d0819 Replace meson subprojects by subdir
Since Meson 0.44, subproject_dir may not be '.' anymore. This implies we
must move app/ and server/ to a subprojects/ directory, which requires
to also change some gradle files.

Instead, just use subdir(), with options to disable building of the app
or the server.
2018-02-14 14:03:56 +01:00
Romain Vimont
ff94462d8a Refactor build system
The client was built with Meson, the server with Gradle, and were run by
a Makefile.

Add a Meson script for the server (which delegates to Gradle), and a
parent script to build and install both the client and the server to the
system, typically with:

    meson --buildtype release build
    cd build
    ninja
    sudo ninja install

In addition, use a separate Makefile to build a "portable" version of
the application (where the client expects the server to be in the
current directory). Typically:

    make release-portable
    cd dist/scrcpy
    ./scrcpy

This is especially useful for Windows builds, which are not "installed".
2018-02-14 09:23:14 +01:00
Romain Vimont
396df8a9d8 Provide config.h.in for old meson versions
The current meson version is able to generate a config.h from a
configuration data object without any template.

However, older versions of meson require a template, so provide it for
compatibility.
2018-02-13 10:24:02 +01:00
Romain Vimont
3ed80a1fac Define macros wrappers for logs
Use macros to wrap SDL_Log* functions with the "application" category.
2018-02-13 10:10:18 +01:00
Romain Vimont
d45ef1a295 Do not use too recent set_quoted()
Old versions of meson do not support set_quoted(). Replace the call by
the old-fashioned manual quotation.
2018-02-12 17:27:25 +01:00
Romain Vimont
a5b6c6cc2d Enable debug logs only for debug builds on server
Print the logs only if their level is not under the threshold, which is
defined to INFO in release mode and DEBUG in debug mode.
2018-02-12 17:19:52 +01:00
Romain Vimont
ad41bacb48 Fix "terminate process" on Windows
CloseHandle() does not terminate the process. TerminateProcess() does.
2018-02-12 16:35:23 +01:00
Romain Vimont
6fe65d9f5c Log with category APPLICATION
All our logs should use APPLICATION category. The logs for other
categories are not printed by default under the "critical" level.
2018-02-12 16:09:34 +01:00
Romain Vimont
598ddcbfbc Disable sanitizer on debug builds
On our Windows machine, the mingw ld.exe does not support sanitizers.

Exclude them from the default debug build.
2018-02-12 15:59:27 +01:00
Romain Vimont
4dbc450d01 Enable debug logs only for debug builds
In release mode, use the default log priorities.
2018-02-12 14:17:29 +01:00
Romain Vimont
2f3e00ed98 Enable link-time optimization for release
Because why not.
2018-02-12 14:17:29 +01:00
Romain Vimont
000c70a644 Decompose accented characters
Characters like 'é' or 'î' are not resolved by getEvents(). For example,
getEvents("é") returns null.

However, it is possible to decompose them. For example,
getEvents("\u0301e") returns the events generating "é".

Thank you Philippe! ;)
2018-02-12 14:17:10 +01:00
Romain Vimont
0fce4f95b9 Properly clean up on exit
The SDL clean up does not crash anymore on exit, probably since the
memory corruption caused by calling SDLNet_TCP_Close() too early has
been resolved.
2018-02-09 16:21:10 +01:00
Romain Vimont
eb09fefd43 Timeout the server socket connection
Wait no more than 2 seconds for accepting the connection from the
device, since it blocks the event loop, preventing to react to SIGTERM
(Ctrl+C).
2018-02-09 16:21:10 +01:00
Romain Vimont
90a46b4c45 Improve startup time
On startup, the client has to:
 1. listen on a port
 2. push and start the server to the device
 3. wait for the server to connect (accept)
 4. read device name and size
 5. initialize SDL
 6. initialize the window and renderer
 7. show the window

From the execution of the app_process command to start the server on the
device, to the execution of the java main method, it takes ~800ms. As a
consequence, step 3 also takes ~800ms on the client.

Once complete, the client initializes SDL, which takes ~500ms.

These two expensive actions are executed sequentially:

                     HOST              DEVICE
listen on port        |                  |
push/start the server |----------------->|| app_process loads the jar
accept the connection .   ^              ||
                      .   |              ||
                      .   | WASTE        ||
                      .   |  OF          ||
                      .   | TIME         ||
                      .   |              ||
                      .   |              ||
                      .   v              X execution of our java main
connection accepted   |<-----------------| connect to the host
init SDL             ||                  |
                     || ,----------------| send frames
                     || |,---------------|
                     || ||,--------------|
                     || |||,-------------|
                     || ||||,------------|
init window/renderer  | |||||,-----------|
display frames        |<++++++-----------|
(many frames skipped)

The rationale for step 3 occuring before step 5 is that initializing
SDL replaces the SIGTERM handler to receive the event in the event loop,
so pressing Ctrl+C during step 5 would not work (since it blocks the
event loop).

But this is not so important; let's parallelize the SDL initialization
with the app_process execution (we'll just add a timeout to the
connection):

                     HOST              DEVICE
listen on port        |                  |
push/start the server |----------------->||app_process loads the jar
init SDL             ||                  ||
                     ||                  ||
                     ||                  ||
                     ||                  ||
                     ||                  ||
                     ||                  ||
accept the connection .                  ||
                      .                  X execution of our java main
connection accepted   |<-----------------| connect to the host
init window/renderer  |                  |
display frames        |<-----------------| send frames
                      |<-----------------|

In addition, show the window only once the first frame is available to
avoid flickering (opening a black window for 100~200ms).

Note: the window and renderer are initialized after the connection is
accepted because they use the device information received from the
device.
2018-02-09 16:19:50 +01:00
Romain Vimont
063cfd1326 Turn screen on in control()
Turning the screen on is semantically associated to control(): only
creating the EventController object should not turn the screen on.
2018-02-09 14:03:25 +01:00
Romain Vimont
523097eadf Provide decoder_init()
Expose an initializer so that the caller does not have to guess what
fields must be initialized.
2018-02-09 13:30:49 +01:00
Romain Vimont
4662198261 Do not release TCP sockets while still in use
SDLNet_TCP_Close() not only closes, but also release the resources.

Therefore, we must not close the socket if another thread attempts to
read it.

For that purpose, move socket closing from server_stop() to
server_destroy().
2018-02-09 12:59:36 +01:00
Romain Vimont
d658586d0d Enable sanitizer in debug builds
"make build-debug" will build with ASAN and USAN enabled.
2018-02-09 12:12:07 +01:00
Romain Vimont
fe21d9dfb5 Move frame updating to screen.c
Replace screen_update() by a higher-level screen_update_frame() handling
the whole frame updating, so that scrcpy.c just call it without managing
implementation details.
2018-02-09 11:14:47 +01:00
Romain Vimont
7458d8271e Kill the server immediately on close
Do not wait 100ms anymore to let the server print any exception: we
justly want to ignore them.

Moreover, there is no nanosleep() on Windows, so this solve another
problem.
2018-02-09 11:01:50 +01:00
Romain Vimont
c683872bbc Avoid server stacktraces on close
On close, the socket is closed by the client, and the server process is
killed.

This leads to (expected) exceptions, that should not be printed.
2018-02-09 10:59:15 +01:00