Commit graph

2086 commits

Author SHA1 Message Date
Romain Vimont
f3197e178d Use packet source trait in demuxer 2023-03-10 22:22:15 +01:00
Romain Vimont
c39054a63d Introduce packet source trait
There was a packet sink trait, implemented by components able to
receive AVPackets, but each packet source had to manually send packets
to sinks.

In order to mutualise sink management, add a packet source trait.
2023-03-10 22:22:15 +01:00
Romain Vimont
f410f2bdc4 Extract sc_delay_buffer
A video buffer had 2 responsibilities:
 - handle the frame delaying mechanism (queuing packets and pushing them
   after the expected delay);
 - keep only the most recent frame (using a sc_frame_buffer).

In order to be able to reuse only the frame delaying mechanism, extract
it to a separate component, sc_delay_buffer.
2023-03-10 22:22:15 +01:00
Romain Vimont
6379c08012 Fix buffering pts conversion
The mistake had no effect, because tick is also internally expressed in
microseconds.
2023-03-10 22:22:15 +01:00
Romain Vimont
4540f1d69e Report video buffer downstream errors
Make the video buffer stop if its consumer could not receive a frame.
2023-03-10 22:22:15 +01:00
Romain Vimont
ad94ccca0b Stop the video buffer on error
If an error occurs from the video buffer thread (typically an
out-of-memory error), then stop.
2023-03-10 22:22:15 +01:00
Romain Vimont
a3703340fc Fix possible race condition on video_buffer end
The video_buffer thread clears the queue once it is stopped, but new
frames might still be pushed asynchronously.

To avoid the problem, do not push any frame once the video_buffer is
stopped.
2023-03-10 22:22:15 +01:00
Romain Vimont
6f38c6311b Remove sc_queue
All uses have been replaced by VecDeque.
2023-03-10 22:22:15 +01:00
Romain Vimont
338310677e Remove cbuf
All uses have been replaced by VecDeque.
2023-03-10 22:22:15 +01:00
Romain Vimont
f978e4d6de Use VecDeque in aoa_hid
Replace cbuf by VecDeque in aoa_hid
2023-03-10 22:22:15 +01:00
Romain Vimont
a0a65b3c4d Use VecDeque in file_pusher
Replace cbuf by VecDeque in file_pusher.

As a side-effect, the new implementation does not limit the queue to an
arbitrary value.
2023-03-10 22:22:15 +01:00
Romain Vimont
4d989de9ae Use VecDeque in controller
Replace cbuf by VecDeque in controller.
2023-03-10 22:22:15 +01:00
Romain Vimont
f25a67f342 Use VecDeque in video_buffer
The packets queued for buffering were wrapped in a dynamically allocated
structure with a "next" field.

To avoid this additional layer of allocation and indirection, use a
VecDeque.
2023-03-10 22:22:15 +01:00
Romain Vimont
efc15744da Use VecDeque in recorder
The packets queued for recording were wrapped in a dynamically allocated
structure with a "next" field.

To avoid this additional layer of allocation and indirection, use a
VecDeque.
2023-03-10 22:22:15 +01:00
Romain Vimont
33df484912 Introduce VecDeque
Introduce a double-ended queue implemented with a growable ring buffer.

Inspired from the Rust VecDeque type:
<https://doc.rust-lang.org/std/collections/struct.VecDeque.html>
2023-03-10 22:22:15 +01:00
Romain Vimont
457385d5f4 Add sc_allocarray() util
Add a function to allocate an array, which fails safely in the case
where the multiplication would overflow.
2023-03-10 22:22:15 +01:00
Romain Vimont
c735b8c127 Use reallocarray() in sc_vector
This fails safely in case of overflow.
2023-03-10 22:22:15 +01:00
Romain Vimont
6dceb32817 Add compat for reallocarray()
This function fails safely in the case where the multiplication would
overflow.
2023-03-10 22:22:15 +01:00
Romain Vimont
6e05d7047a Call avcodec_receive_frame() in a loop
Since in scrcpy a video packet passed to avcodec_send_packet() is always
a complete video frame, it is sufficient to call avcodec_receive_frame()
exactly once.

In practice, it also works for audio packets: the decoder produces
exactly 1 frame for 1 input packet.

In theory, it is an implementation detail though, so
avcodec_receive_frame() should be called in a loop.
2023-03-10 22:22:15 +01:00
Romain Vimont
c1528cdca9 Add --require-audio
By default, scrcpy mirrors only the video when audio capture fails on
the device. Add an option to force scrcpy to fail if audio is enabled
but does not work.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Simon Chan
de40cac6ad Add workaround to capture audio on Android 11
On Android 11, it is possible to start the capture only when the running
app is in foreground. But scrcpy is not an app, it's a Java application
started from shell.

As a workaround, start an existing Android shell existing activity just
to start the capture, then close it immediately.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2023-03-10 22:22:15 +01:00
Romain Vimont
b60a8aa657 Add two-step write feature to bytebuf
If there is exactly one producer, then it can assume that the remaining
space in the buffer will only increase until it writes something.

This assumption may allow the producer to write to the buffer (up to a
known safe size) without any synchronization mechanism, thus allowing
to read and write different parts of the buffer in parallel.

The producer can then commit the write with a lock held, and update its
knowledge of the safe empty remaining space.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
20d41fdd7e Introduce bytebuf util
Add a ring-buffer for bytes. It will be useful for audio buffering.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
619730edaf Pass AVCodecContext to frame sinks
Frame consumers may need details about the frame format.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
e22660d698 Add an audio decoder
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
05f0e35d2a Give a name to decoder instances
This will be useful in logs.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
99837fa600 Rename decoder to video_decoder
This prepares the introduction of audio_decoder.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
a205ff6c8b Log display sizes in display list
This is more convenient than just the display id alone.
2023-03-10 22:22:15 +01:00
Romain Vimont
b65301f672 Add --list-displays
Add an option to list the device displays properly.
2023-03-10 22:22:15 +01:00
Romain Vimont
2596ca02f0 Move log message helpers to LogUtils
This class will also contain other log helpers.
2023-03-10 22:22:15 +01:00
Romain Vimont
50d56a9a2b Quit on audio configuration failure
When audio capture fails on the device, scrcpy continues mirroring the
video stream. This allows to enable audio by default only when
supported.

However, if an audio configuration occurs (for example the user
explicitly selected an unknown audio encoder), this must be treated as
an error and scrcpy must exit.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
9196dc1563 Add --list-encoders
Add an option to list the device encoders properly.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
b7e5284adf Move await_for_server() logs
Print the logs on the caller side. This will allow to call the function
in another context without printing the logs.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
f9960e959f Add --audio-encoder
Similar to --video-encoder, but for audio.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
6f332a2bc7 Extract unknown encoder error message
This will allow to reuse the same code for audio encoder selection.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
b03c864c70 Add --audio-codec-options
Similar to --video-codec-options, but for audio.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
58cf8e5401 Extract application of codec options
This will allow to reuse the same code for audio codec options.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
4601735e51 Add support for AAC audio codec
Add option --audio-codec=aac.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
839b842aa7 Add --audio-codec
Introduce the selection mechanism. Alternative codecs will be added
later.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
0870b8c8be Add --audio-bit-rate
Add an option to configure the audio bit-rate.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
8e640dc90f Disable MethodLength checkstyle on createOptions()
This method will grow as needed to initialize options.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
e694619d53 Rename --encoder to --video-encoder
This prepares the introduction of --audio-encoder.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
31555fa530 Rename --codec-options to --video-codec-options
This prepares the introduction of --audio-codec-options.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
9087e85c3f Rename --bit-rate to --video-bit-rate
This prepares the introduction of --audio-bit-rate.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
cee40ca047 Rename --codec to --video-codec
This prepares the introduction of --audio-codec.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
a1802dab76 Remove default bit-rate on client side
If no bit-rate is passed, let the server use the default value (8Mbps).

This avoids to define a default value on both sides, and to pass the
default bit-rate as an argument when starting the server.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
17d5301c0f Record at least video packets on stop
If the recorder is stopped while it has not received any audio packet
yet, make sure the video stream is correctly recorded.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
80c0780b77 Disable audio before Android 11
The permission "android.permission.RECORD_AUDIO" has been added for
shell in Android 11.

Moreover, on lower versions, it may make the server segfault on the
device (happened on a Nexus 5 with Android 6.0.1).

Refs <4feeee8891%5E%21/>
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
13a3395a33 Disable audio on initialization error
By default, audio is enabled (--no-audio must be explicitly passed to
disable it).

However, some devices may not support audio capture (typically devices
below Android 11, or Android 11 when the shell application is not
foreground on start).

In that case, make the server notify the client to dynamically disable
audio forwarding so that it does not wait indefinitely for an audio
stream.

Also disable audio on unknown codec or missing decoder on the
client-side, for the same reasons.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00
Romain Vimont
7de0622214 Add audio recording support
Make the recorder accept two input sources (video and audio), and mux
them into a single file.

PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
2023-03-10 22:22:15 +01:00