If no bit-rate is passed, let the server use the default value (8Mbps).
This avoids to define a default value on both sides, and to pass the
default bit-rate as an argument when starting the server.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
If the current adb port is not 5555 (typically 0 because it is not in
TCP/IP mode), --tcpip automatically executes (among other commands):
adb tcpip 5555
In case adb was already listening on another port, this command forced
to listen on 5555, and the connection should still succeed.
But this reconfiguration might be inconvenient for the user. If adb is
already in TCP/IP mode, use the current enabled port without
reconfiguration.
Fixes#3591 <https://github.com/Genymobile/scrcpy/issues/3591>
If several devices are connected (as listed by `adb devices`), it was
necessary to provide the explicit serial via -s/--serial.
If only one device is connected via USB (respectively, via TCP/IP), it
might be convenient to select it automatically. For this purpose, two
new options are introduced:
- -d/--select-usb: select the single device connected over USB
- -e/--select-tcpip: select the single device connected over TCP/IP
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Add an option --otg to run scrcpy with only physical keyboard and mouse
simulation (HID over AOA), without mirroring and without requiring adb.
To avoid adding complexity into the scrcpy initialization and screen
implementation, OTG mode is implemented totally separately, with a
separate window.
PR #2974 <https://github.com/Genymobile/scrcpy/pull/2974>
Expose an option to automatically configure and reconnect the device
over TCP/IP, to simplify wireless connection without using adb
explicitly.
There are two variants:
- If a destination address is provided, then scrcpy connects to this
address before starting. The device must listen on the given TCP port
(default is 5555).
- If no destination address is provided, then scrcpy attempts to find
the IP address of the current device (typically connected over USB),
enables TCP/IP mode, then connects to this address before starting.
PR #2827 <https://github.com/Genymobile/scrcpy/pull/2827>
In "adb forward" mode, by default, scrcpy connects to localhost:PORT,
where PORT is the local port passed to "adb forward". This assumes that
the tunnel is established on the local host with a local adb server
(which is the common case).
For advanced usage, add --tunnel-host and --tunnel-port to force the
connection to a different destination.
Fixes#2801 <https://github.com/Genymobile/scrcpy/issues/2801>
PR #2807 <https://github.com/Genymobile/scrcpy/pull/2807>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Change the default push target from /sdcard/ to /sdcard/Download/.
Pushing to the root of /sdcard/ is not very convenient, many apps do not
expose its content directly.
It can still be changed by --push-target.
PR #2384 <https://github.com/Genymobile/scrcpy/pull/2384>
Add a new mode to the --lock-video-orientation option, to lock the
initial orientation of the device.
This avoids to pass an explicit value (0, 1, 2 or 3) and think about
which is the right one.
This flag forced the decoder to wait for the previous frame to be
consumed by the display.
It was initially implemented as a compilation flag for testing, not
intended to be exposed at runtime. But to remove ifdefs and to allow
users to test this flag easily, it had finally been exposed by commit
ebccb9f6cc.
In practice, it turned out to be useless: it had no practical impact,
and it did not solve or mitigate any performance issues causing frame
skipping.
But that added some complexity to the codebase: it required an
additional condition variable, and made video buffer calls possibly
blocking, which in turn required code to interrupt it on exit.
To prepare support for multiple sinks plugged to the decoder (display
and v4l2 for example), the blocking call used for pacing the decoder
output becomes unacceptable, so just remove this useless "feature".
