Commit graph

34 commits

Author SHA1 Message Date
Simon Chan
0afef0c634 Forward action button to device
On click event, only the whole buttons state was passed to the device.
In addition, on ACTION_DOWN and ACTION_UP, pass the button associated to
the action.

Refs #3635 <https://github.com/Genymobile/scrcpy/issues/3635>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2023-01-30 20:57:54 +01:00
Pawel Jasinski
c7b1d0ea9a Force mouse source when --forward-all-clicks
Right click and middle click require the source device to be a mouse,
not a touchscreen. Therefore, the source device was changed only when a
button other than the primary button was pressed (see
adc547fa6e).

However, this led to inconsistencies between the ACTION_DOWN when a
secondary button is pressed (with a mouse as source device) and the
matching ACTION_UP when the secondary button is released (with a
touchscreen as source device, because then there is no button pressed).

To avoid the problem in all cases, force a mouse as source device when
--forward-all-clicks is set.

Concretely, for mouse events in --forward-all-clicks mode:
 - device source is set to InputDevice.SOURCE_MOUSE;
 - motion event toolType is set to MotionEvent.TOOL_TYPE_MOUSE;

Otherwise (when --forward-all-clicks is unset, or for real touch
events), finger events are injected:
 - device source is set to InputDevice.SOURCE_TOUCHSCREEN;
 - motion event toolType is set to MotionEvent.TOOL_TYPE_FINGER.

Fixes #3568 <https://github.com/Genymobile/scrcpy/issues/3568>
PR #3579 <https://github.com/Genymobile/scrcpy/pull/3579>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2022-12-22 11:26:26 +01:00
Simon Chan
57056d078d Use precise scrolling values
Since SDL 2.0.18, the amount scrolled horizontally or vertically is
exposed as a float (between 0 and 1). Forward a precise value to the
Android device when possible.

Refs <https://wiki.libsdl.org/SDL_MouseWheelEvent>
Fixes #3363 <https://github.com/Genymobile/scrcpy/issues/3363>
PR #3369 <https://github.com/Genymobile/scrcpy/pull/3369>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2022-08-28 15:23:08 +02:00
Romain Vimont
fa5b2a29e9 Add missing SC_ prefix to header guards 2022-04-12 23:59:01 +02:00
Romain Vimont
9d2e00697e Use sc_ prefix for control_msg enums
Refs afa4a1b728
2022-01-27 16:47:51 +01:00
Romain Vimont
afa4a1b728 Use sc_ prefix for control_msg 2022-01-14 22:17:30 +01:00
Romain Vimont
924375487e Pass buttons state in scroll events
A scroll event might be produced when a mouse button is pressed (for
example when scrolling while selecting a text). For consistency, pass
the actual buttons state (instead of 0).

In practice, it seems that this use case does not work properly with
Android event injection, but it will work with HID mouse.
2022-01-04 17:41:40 +01:00
Yu-Chen Lin
d80bc25eba Fix overflow in memcpy
In function ‘memcpy’,
    inlined from ‘control_msg_serialize.constprop’ at ../app/src/control_msg.c:77:5,
    inlined from ‘run_controller’ at ../app/src/controller.c:69:12:
        /usr/include/x86_64-linux-gnu/bits/string_fortified.h:34:10:
        warning: ‘__builtin___memcpy_chk’ writing 262138 bytes into a region
        of size 262130 overflows the destination [-Wstringop-overflow=]
   return __builtin___memcpy_chk (__dest, __src, __len, __bos0 (__dest));

Refs 901d837165
PR #2859 <https://github.com/Genymobile/scrcpy/pull/2859>

Signed-off-by: Yu-Chen Lin <npes87184@gmail.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2021-12-04 09:18:55 +01:00
Romain Vimont
e2b3968c66 Always synchronize clipboard on explicit COPY/CUT
If --no-clipboard-autosync is enabled, the automatic clipboard
synchronization performed whenever the device clipboard changes is
disabled.

But on explicit COPY and CUT scrcpy shortcuts (MOD+c and MOD+x), the
clipboard should still be synchronized, so that it remains possible to
copy-paste from the device to the computer.

This is consistent with the behavior of MOD+v, which pastes the computer
clipboard to the device.

Refs #2228 <https://github.com/Genymobile/scrcpy/issues/2228>
Refs #2817 <https://github.com/Genymobile/scrcpy/pull/2817>
PR #2834 <https://github.com/Genymobile/scrcpy/pull/2834>
2021-11-29 22:00:55 +01:00
Romain Vimont
901d837165 Add sequence number to set_clipboard request
This will allow the client to request an acknowledgement.

PR #2814 <https://github.com/Genymobile/scrcpy/pull/2814>
2021-11-23 21:15:05 +01:00
Romain Vimont
4c4381de4c Use sc_ prefix for size, position and point 2021-10-30 15:20:39 +02:00
Marti Raudsepp
19ca02cd8f Log control messages in verbose mode
PR #2371 <https://github.com/Genymobile/scrcpy/pull/2371>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2021-06-20 16:03:52 +02:00
Romain Vimont
8b90e1d3f4 Remove extra ';' in #define 2021-06-20 12:34:19 +02:00
brunoais
50eecdab28 Add control message to expand settings panel
PR #2260 <https://github.com/Genymobile/scrcpy/pull/2260>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2021-04-25 14:36:48 +02:00
brunoais
66c581851f Rename control message type to COLLAPSE_PANELS
The collapsing action collapses any panels.

By the way, the Android method is named collapsePanels().

PR #2260 <https://github.com/Genymobile/scrcpy/pull/2260>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2021-04-25 14:36:48 +02:00
Romain Vimont
d0739911a3 Forward DOWN and UP separately for right-click
The shortcut "back on screen on" is a bit special: the control is
requested by the client, but the actual event injection (POWER or BACK)
is determined on the device.

To properly inject DOWN and UP events for BACK, transmit the action as
a control parameter.

If the screen is off:
 - on DOWN, inject POWER (DOWN and UP) (wake up the device immediately)
 - on UP, do nothing
If the screen is on:
 - on DOWN, inject BACK DOWN
 - on UP, inject BACK UP

A corner case is when the screen turns off between the DOWN and UP
event. In that case, a BACK UP event will be injected, so it's harmless.

As a consequence of this change, the BACK button is now handled by
Android on mouse released. This is consistent with the keyboard shortcut
(Mod+b) behavior.

PR #2259 <https://github.com/Genymobile/scrcpy/pull/2259>
Refs #2258 <https://github.com/Genymobile/scrcpy/pull/2258>
2021-04-19 20:16:45 +02:00
Romain Vimont
30e619d37f Replace SDL_strdup() by strdup()
The functions SDL_malloc(), SDL_free() and SDL_strdup() were used only
because strdup() was not available everywhere.

Now that it is available, use the native version of these functions.
2021-02-17 09:54:03 +01:00
Romain Vimont
ab912c23e7 Define feature test macros in common.h
This enables necessary functions once for all.

As a consequence, define common.h before any other header.
2021-01-17 14:08:48 +01:00
Romain Vimont
59feb2a15c Group common includes into common.h
Include config.h and compat.h in common.h, and include common.h from all
source files.
2021-01-08 19:22:10 +01:00
Romain Vimont
6385b8c162 Move common structs to coords.h
The size, point and position structs were defined in common.h. Move them
to coords.h so that common.h could be used for generic code to be
included in all source files.
2021-01-08 19:22:10 +01:00
Romain Vimont
198346d148 Add pinch-to-zoom simulation
If Ctrl is hold when the left-click button is pressed, enable
pinch-to-zoom to scale and rotate relative to the center of the screen.

Fixes #24 <https://github.com/Genymobile/scrcpy/issues/24>
2020-08-10 20:08:24 +02:00
xeropresence
3c1ed5d86c Handle repeating keycodes
Initialize "repeat" count on key events.

PR #1519 <https://github.com/Genymobile/scrcpy/pull/1519>
Refs #1013 <https://github.com/Genymobile/scrcpy/pull/1013>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2020-06-19 22:30:17 +02:00
Romain Vimont
488d22d4e2 Increase clipboard size from 4k to 256k
Beyond 256k, SDL_GetClipboardText() returns an empty string on my
computer.

Fixes #1117 <https://github.com/Genymobile/scrcpy/issues/1117>
2020-06-11 23:11:20 +02:00
Romain Vimont
245999aec4 Serialize text size on 4 bytes
This will allow to send text having a size greater than 65535 bytes.
2020-06-11 23:11:17 +02:00
Romain Vimont
d91c5dcfd5 Rename MSG_SERIALIZED_MAX_SIZE to MSG_MAX_SIZE
For simplicity and consistency with the server part.
2020-06-11 23:08:04 +02:00
Romain Vimont
8f314c74b0 Reorganize message size constants
Make the max clipboard text length depend on the max message size.
2020-06-11 22:58:54 +02:00
Romain Vimont
fc1dec0270 Paste on "set clipboard" if possible
Ctrl+Shift+v synchronizes the computer clipboard to the Android device
clipboard. This feature had been added to provide a way to copy UTF-8
text from the computer to the device.

To make such a paste more straightforward, if the device runs at least
Android 7, also send a PASTE keycode to paste immediately.

<https://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_PASTE>

Fixes #786 <https://github.com/Genymobile/scrcpy/issues/786>
2020-05-25 20:59:21 +02:00
Romain Vimont
270d0bf639 Rename max length constant for text injection
To avoid confusion with the max text size for clipboard, rename the
constant limiting the text injection length.
2020-04-13 19:38:43 +02:00
Romain Vimont
eb0f339271 Add shortcut to rotate screen
On Ctrl+r, disable auto-rotation (if enabled), set the screen rotation
and re-enable auto-rotation (if it was enabled).

Closes #11 <https://github.com/Genymobile/scrcpy/issues/11>
2019-12-04 22:03:25 +01:00
Romain Vimont
6220456def Merge mouse and touch events
Both are handled the very same way on the device.
2019-10-03 20:37:49 +02:00
Romain Vimont
77f876e29c Add "inject touch" control message
Add a control message type in the protocol to forward touch events to
the device.
2019-10-03 20:05:27 +02:00
Romain Vimont
1f8ba1ca79 Include config.h everywhere
Ref: <https://github.com/Genymobile/scrcpy/issues/829>

Suggested-by: Louis Kruger <louisk@gmail.com>
2019-09-29 22:39:53 +02:00
Romain Vimont
12a3bb25d3 Implement device screen off while mirroring
Add two shortcuts:
 - Ctrl+o to turn the device screen off while mirroring
 - Ctrl+Shift+o to turn it back on

On power on (either via the POWER key or BACK while screen is off), both
the device screen and the mirror are turned on.

<https://github.com/Genymobile/scrcpy/issues/175>
2019-05-31 23:07:23 +02:00
Romain Vimont
28980bbc90 Rename "event" to "message"
After the recent refactorings, a "control event" is not necessarily an
"event" (it may be a "command"). Similarly, the unique "device event"
used to send the device clipboard content is more a "reponse" to the
request from the client than an "event".

Rename both to "message", and rename the message types to better
describe their intent.
2019-05-31 16:18:00 +02:00