pkgbuilds/linux-phicomm-n1/meson-gxl-s905d-phicomm-n1.dts

78 lines
1.4 KiB
Text
Raw Normal View History

2019-09-04 16:15:54 +08:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 He Yangxuan
*/
/dts-v1/;
#include "meson-gxl-s905d-p230.dts"
/ {
compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl";
model = "Phicomm N1";
cvbs-connector {
status = "disabled";
};
leds {
compatible = "gpio-leds";
status {
label = "n1:white:status";
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&ethmac {
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&eth_phy0>;
amlogic,tx-delay-ns = <2>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
mdio {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "snps,dwmac-mdio";
phandle = <0x1a>;
eth_phy0: ethernet-phy@0 {
reg = <0x0>;
phandle = <0x1d>;
};
};
};
/* This UART is connected to the Bluetooth module */
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
};
&cvbs_vdac_port {
status = "disabled";
};