76 lines
2.2 KiB
Markdown
76 lines
2.2 KiB
Markdown
|
# D-Modem
|
||
|
|
Software modem with **sound**
|
||
|
|
For burble's retro voip modem https://burble.dn42/retro/modem/
|
||
|
|
Now also for JerryXiao's own software voip modems!
|
||
|
|
|
||
|
|
Fortunately this old proprietary software modem still works :)
|
||
|
|
|
||
|
|
## Prerequisite
|
||
|
|
- A desktop GNU/Linux distribution, livecd is also OK
|
||
|
|
- See the original README
|
||
|
|
- Modem without any sound isn't a real modem? No problem, pulseaudio is used to output modem sound in realtime. You must have pulseaudio dev package installed on your system to compile this software.
|
||
|
|
|
||
|
|
## Step-by-step instruction
|
||
|
|
|
||
|
|
Execute these commands as a normal user:
|
||
|
|
|
||
|
|
```
|
||
|
|
make
|
||
|
|
./slmodemd/slmodemd -e ./d-modem
|
||
|
|
screen /tmp/ttySL0 115200
|
||
|
|
```
|
||
|
|
|
||
|
|
Inside the serial console, use the following at commands:
|
||
|
|
|
||
|
|
```
|
||
|
|
ATX3
|
||
|
|
> OK
|
||
|
|
AT+MS=22,1
|
||
|
|
> OK
|
||
|
|
ATD424026019@voip.burble.dn42
|
||
|
|
> CONNECT 1200
|
||
|
|
```
|
||
|
|
|
||
|
|
You can also connect to:
|
||
|
|
| number | AT+MS | ATD | Modulation |
|
||
|
|
| ------------ | ------------ | ------------ | ------------ |
|
||
|
|
| (42403618)361800 | AT+MS=90,1 | ATD361800@pbx.jerry.dn42 | V.90 |
|
||
|
|
| (42403618)361801 | AT+MS=34,1 | ATD361801@pbx.jerry.dn42 | V.34 |
|
||
|
|
| (42403618)361802 | AT+MS=32,1 | ATD361802@pbx.jerry.dn42 | V.32 |
|
||
|
|
| (42403618)361803 | AT+MS=22,1 | ATD361803@pbx.jerry.dn42 | V.22 |
|
||
|
|
| (42403618)361804 | AT+MS=22,1 | ATD361804@pbx.jerry.dn42 | V.22 |
|
||
|
|
| (42403618)361805 | AT+MS=23,1 | ATD361805@pbx.jerry.dn42 | V.23 |
|
||
|
|
| (42403618)361806 | AT+MS=23,1 | ATD361806@pbx.jerry.dn42 | V.23 |
|
||
|
|
|
||
|
|
Now you should be connected. If you see a login prompt, go to https://burble.dn42/retro/modem/ for login username and password. Once logged in, close out of GUN Screen and execute pppd like this:
|
||
|
|
|
||
|
|
```
|
||
|
|
sudo pppd $(readlink /tmp/ttySL0) 1200 user dn42 noauth nodefaultroute nodetach
|
||
|
|
```
|
||
|
|
|
||
|
|
nodefaultroute is used here to keep your voip alive :)
|
||
|
|
|
||
|
|
## netns
|
||
|
|
If you would like a full dialup dn42 experience, try using netns:
|
||
|
|
|
||
|
|
```
|
||
|
|
sudo ip netns add modem
|
||
|
|
sudo ip netns exec modem pppd $(readlink /tmp/ttySL0) 1200 noauth nodefaultroute nodetach
|
||
|
|
```
|
||
|
|
|
||
|
|
Start a new terminal and
|
||
|
|
```
|
||
|
|
sudo ip netns exec modem $SHELL
|
||
|
|
unshare -m
|
||
|
|
echo 172.23.0.53 > /tmp/resolv.conf
|
||
|
|
mount --bind /tmp/resolv.conf /etc/resolv.conf
|
||
|
|
ping burble.dn42
|
||
|
|
```
|
||
|
|
|
||
|
|
Have fun!
|
||
|
|
|
||
|
|
|
||
|
|
## Server
|
||
|
|
This code can also work as a server, no docs available though ;)
|
||
|
|
Just type ATA in the modem console and try it out first.
|