600 lines
21 KiB
C
600 lines
21 KiB
C
/* $Id$ */
|
|
/*
|
|
* Copyright (C) 2008-2011 Teluu Inc. (http://www.teluu.com)
|
|
* Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#ifndef __PJMEDIA_CONF_H__
|
|
#define __PJMEDIA_CONF_H__
|
|
|
|
|
|
/**
|
|
* @file conference.h
|
|
* @brief Conference bridge.
|
|
*/
|
|
#include <pjmedia/port.h>
|
|
|
|
/**
|
|
* @defgroup PJMEDIA_CONF Conference Bridge
|
|
* @ingroup PJMEDIA_PORT
|
|
* @brief Audio conference bridge implementation
|
|
* @{
|
|
*
|
|
* This describes the conference bridge implementation in PJMEDIA. The
|
|
* conference bridge provides powerful and very efficient mechanism to
|
|
* route the audio flow and mix the audio signal when required.
|
|
*
|
|
* Some more information about the media flow when conference bridge is
|
|
* used is described in http://www.pjsip.org/trac/wiki/media-flow .
|
|
*/
|
|
|
|
PJ_BEGIN_DECL
|
|
|
|
/* Since 1.3 pjmedia_conf_add_passive_port() has been deprecated
|
|
* and replaced by splitcomb.
|
|
* See also https://trac.pjsip.org/repos/ticket/2234.
|
|
*/
|
|
#ifndef DEPRECATED_FOR_TICKET_2234
|
|
# define DEPRECATED_FOR_TICKET_2234 1
|
|
#endif
|
|
|
|
/**
|
|
* The conference bridge signature in pjmedia_port_info.
|
|
*/
|
|
#define PJMEDIA_CONF_BRIDGE_SIGNATURE PJMEDIA_SIG_PORT_CONF
|
|
|
|
/**
|
|
* The audio switchboard signature in pjmedia_port_info.
|
|
*/
|
|
#define PJMEDIA_CONF_SWITCH_SIGNATURE PJMEDIA_SIG_PORT_CONF_SWITCH
|
|
|
|
|
|
/**
|
|
* Opaque type for conference bridge.
|
|
*/
|
|
typedef struct pjmedia_conf pjmedia_conf;
|
|
|
|
/**
|
|
* Conference port info.
|
|
*/
|
|
typedef struct pjmedia_conf_port_info
|
|
{
|
|
unsigned slot; /**< Slot number. */
|
|
pj_str_t name; /**< Port name. */
|
|
pjmedia_format format; /**< Format. */
|
|
pjmedia_port_op tx_setting; /**< Transmit settings. */
|
|
pjmedia_port_op rx_setting; /**< Receive settings. */
|
|
unsigned listener_cnt; /**< Number of listeners. */
|
|
unsigned *listener_slots; /**< Array of listeners. */
|
|
unsigned *listener_adj_level; /**< Array of listeners' level
|
|
adjustment */
|
|
unsigned transmitter_cnt; /**< Number of transmitter. */
|
|
unsigned clock_rate; /**< Clock rate of the port. */
|
|
unsigned channel_count; /**< Number of channels. */
|
|
unsigned samples_per_frame; /**< Samples per frame */
|
|
unsigned bits_per_sample; /**< Bits per sample. */
|
|
int tx_adj_level; /**< Tx level adjustment. */
|
|
int rx_adj_level; /**< Rx level adjustment. */
|
|
} pjmedia_conf_port_info;
|
|
|
|
|
|
/**
|
|
* Conference port options. The values here can be combined in bitmask to
|
|
* be specified when the conference bridge is created.
|
|
*/
|
|
enum pjmedia_conf_option
|
|
{
|
|
PJMEDIA_CONF_NO_MIC = 1, /**< Disable audio streams from the
|
|
microphone device. */
|
|
PJMEDIA_CONF_NO_DEVICE = 2, /**< Do not create sound device. */
|
|
PJMEDIA_CONF_SMALL_FILTER=4,/**< Use small filter table when resampling */
|
|
PJMEDIA_CONF_USE_LINEAR=8 /**< Use linear resampling instead of filter
|
|
based. */
|
|
};
|
|
|
|
|
|
/**
|
|
* Create conference bridge with the specified parameters. The sampling rate,
|
|
* samples per frame, and bits per sample will be used for the internal
|
|
* operation of the bridge (e.g. when mixing audio frames). However, ports
|
|
* with different configuration may be connected to the bridge. In this case,
|
|
* the bridge is able to perform sampling rate conversion, and buffering in
|
|
* case the samples per frame is different.
|
|
*
|
|
* For this version of PJMEDIA, only 16bits per sample is supported.
|
|
*
|
|
* For this version of PJMEDIA, the channel count of the ports MUST match
|
|
* the channel count of the bridge.
|
|
*
|
|
* Under normal operation (i.e. when PJMEDIA_CONF_NO_DEVICE option is NOT
|
|
* specified), the bridge internally create an instance of sound device
|
|
* and connect the sound device to port zero of the bridge.
|
|
*
|
|
* If PJMEDIA_CONF_NO_DEVICE options is specified, no sound device will
|
|
* be created in the conference bridge. Application MUST acquire the port
|
|
* interface of the bridge by calling #pjmedia_conf_get_master_port(), and
|
|
* connect this port interface to a sound device port by calling
|
|
* #pjmedia_snd_port_connect(), or to a master port (pjmedia_master_port)
|
|
* if application doesn't want to instantiate any sound devices.
|
|
*
|
|
* The sound device or master port are crucial for the bridge's operation,
|
|
* because it provides the bridge with necessary clock to process the audio
|
|
* frames periodically. Internally, the bridge runs when get_frame() to
|
|
* port zero is called.
|
|
*
|
|
* @param pool Pool to use to allocate the bridge and
|
|
* additional buffers for the sound device.
|
|
* @param max_slots Maximum number of slots/ports to be created in
|
|
* the bridge. Note that the bridge internally uses
|
|
* one port for the sound device, so the actual
|
|
* maximum number of ports will be less one than
|
|
* this value.
|
|
* @param sampling_rate Set the sampling rate of the bridge. This value
|
|
* is also used to set the sampling rate of the
|
|
* sound device.
|
|
* @param channel_count Number of channels in the PCM stream. Normally
|
|
* the value will be 1 for mono, but application may
|
|
* specify a value of 2 for stereo. Note that all
|
|
* ports that will be connected to the bridge MUST
|
|
* have the same number of channels as the bridge.
|
|
* @param samples_per_frame Set the number of samples per frame. This value
|
|
* is also used to set the sound device.
|
|
* @param bits_per_sample Set the number of bits per sample. This value
|
|
* is also used to set the sound device. Currently
|
|
* only 16bit per sample is supported.
|
|
* @param options Bitmask options to be set for the bridge. The
|
|
* options are constructed from #pjmedia_conf_option
|
|
* enumeration.
|
|
* @param p_conf Pointer to receive the conference bridge instance.
|
|
*
|
|
* @return PJ_SUCCESS if conference bridge can be created.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_create( pj_pool_t *pool,
|
|
unsigned max_slots,
|
|
unsigned sampling_rate,
|
|
unsigned channel_count,
|
|
unsigned samples_per_frame,
|
|
unsigned bits_per_sample,
|
|
unsigned options,
|
|
pjmedia_conf **p_conf );
|
|
|
|
|
|
/**
|
|
* Destroy conference bridge.
|
|
*
|
|
* @param conf The conference bridge.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_destroy( pjmedia_conf *conf );
|
|
|
|
|
|
/**
|
|
* Get the master port interface of the conference bridge. The master port
|
|
* corresponds to the port zero of the bridge. This is only usefull when
|
|
* application wants to manage the sound device by itself, instead of
|
|
* allowing the bridge to automatically create a sound device implicitly.
|
|
*
|
|
* This function will only return a port interface if PJMEDIA_CONF_NO_DEVICE
|
|
* option was specified when the bridge was created.
|
|
*
|
|
* Application can connect the port returned by this function to a
|
|
* sound device by calling #pjmedia_snd_port_connect().
|
|
*
|
|
* @param conf The conference bridge.
|
|
*
|
|
* @return The port interface of port zero of the bridge,
|
|
* only when PJMEDIA_CONF_NO_DEVICE options was
|
|
* specified when the bridge was created.
|
|
*/
|
|
PJ_DECL(pjmedia_port*) pjmedia_conf_get_master_port(pjmedia_conf *conf);
|
|
|
|
|
|
/**
|
|
* Set master port name.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param name Name to be assigned.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_set_port0_name(pjmedia_conf *conf,
|
|
const pj_str_t *name);
|
|
|
|
|
|
/**
|
|
* Add media port to the conference bridge.
|
|
*
|
|
* By default, the new conference port will have both TX and RX enabled,
|
|
* but it is not connected to any other ports. Application SHOULD call
|
|
* #pjmedia_conf_connect_port() to enable audio transmission and receipt
|
|
* to/from this port.
|
|
*
|
|
* Once the media port is connected to other port(s) in the bridge,
|
|
* the bridge will continuosly call get_frame() and put_frame() to the
|
|
* port, allowing media to flow to/from the port.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param pool Pool to allocate buffers for this port.
|
|
* @param strm_port Stream port interface.
|
|
* @param name Optional name for the port. If this value is NULL,
|
|
* the name will be taken from the name in the port
|
|
* info.
|
|
* @param p_slot Pointer to receive the slot index of the port in
|
|
* the conference bridge.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_add_port( pjmedia_conf *conf,
|
|
pj_pool_t *pool,
|
|
pjmedia_port *strm_port,
|
|
const pj_str_t *name,
|
|
unsigned *p_slot );
|
|
|
|
|
|
#if !DEPRECATED_FOR_TICKET_2234
|
|
/**
|
|
* <i><b>Warning:</b> This API has been deprecated since 1.3 and will be
|
|
* removed in the future release, use @ref PJMEDIA_SPLITCOMB instead.</i>
|
|
*
|
|
* Create and add a passive media port to the conference bridge. Unlike
|
|
* "normal" media port that is added with #pjmedia_conf_add_port(), media
|
|
* port created with this function will not have its get_frame() and
|
|
* put_frame() called by the bridge; instead, application MUST continuosly
|
|
* call these functions to the port, to allow media to flow from/to the
|
|
* port.
|
|
*
|
|
* Upon return of this function, application will be given two objects:
|
|
* the slot number of the port in the bridge, and pointer to the media
|
|
* port where application MUST start calling get_frame() and put_frame()
|
|
* to the port.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param pool Pool to allocate buffers etc for this port.
|
|
* @param name Name to be assigned to the port.
|
|
* @param clock_rate Clock rate/sampling rate.
|
|
* @param channel_count Number of channels.
|
|
* @param samples_per_frame Number of samples per frame.
|
|
* @param bits_per_sample Number of bits per sample.
|
|
* @param options Options (should be zero at the moment).
|
|
* @param p_slot Pointer to receive the slot index of the port in
|
|
* the conference bridge.
|
|
* @param p_port Pointer to receive the port instance.
|
|
*
|
|
* @return PJ_SUCCESS on success, or the appropriate error
|
|
* code.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_add_passive_port( pjmedia_conf *conf,
|
|
pj_pool_t *pool,
|
|
const pj_str_t *name,
|
|
unsigned clock_rate,
|
|
unsigned channel_count,
|
|
unsigned samples_per_frame,
|
|
unsigned bits_per_sample,
|
|
unsigned options,
|
|
unsigned *p_slot,
|
|
pjmedia_port **p_port );
|
|
|
|
#endif
|
|
|
|
/**
|
|
* Change TX and RX settings for the port.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot Port number/slot in the conference bridge.
|
|
* @param tx Settings for the transmission TO this port.
|
|
* @param rx Settings for the receipt FROM this port.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_configure_port( pjmedia_conf *conf,
|
|
unsigned slot,
|
|
pjmedia_port_op tx,
|
|
pjmedia_port_op rx);
|
|
|
|
|
|
/**
|
|
* Enable unidirectional audio from the specified source slot to the specified
|
|
* sink slot.
|
|
* Application may adjust the level to make signal transmitted from the source
|
|
* slot to the sink slot either louder or more quiet. The level adjustment is
|
|
* calculated with this formula:
|
|
* <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using this, zero
|
|
* indicates no adjustment, the value -128 will mute the signal, and the value
|
|
* of +128 will make the signal 100% louder, +256 will make it 200% louder,
|
|
* etc.
|
|
*
|
|
* The level adjustment will apply to a specific connection only (i.e. only
|
|
* for the signal from the source to the sink), as compared to
|
|
* pjmedia_conf_adjust_tx_level()/pjmedia_conf_adjust_rx_level() which
|
|
* applies to all signals from/to that port. The signal adjustment
|
|
* will be cumulative, in this following order:
|
|
* signal from the source will be adjusted with the level specified
|
|
* in pjmedia_conf_adjust_rx_level(), then with the level specified
|
|
* via this API, and finally with the level specified to the sink's
|
|
* pjmedia_conf_adjust_tx_level().
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param src_slot Source slot.
|
|
* @param sink_slot Sink slot.
|
|
* @param adj_level Adjustment level, which must be greater than or equal
|
|
* to -128. A value of zero means there is no level
|
|
* adjustment to be made, the value -128 will mute the
|
|
* signal, and the value of +128 will make the signal
|
|
* 100% louder, +256 will make it 200% louder, etc.
|
|
* See the function description for the formula.
|
|
*
|
|
* @return PJ_SUCCES on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_connect_port( pjmedia_conf *conf,
|
|
unsigned src_slot,
|
|
unsigned sink_slot,
|
|
int adj_level );
|
|
|
|
|
|
/**
|
|
* Disconnect unidirectional audio from the specified source to the specified
|
|
* sink slot.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param src_slot Source slot.
|
|
* @param sink_slot Sink slot.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_disconnect_port( pjmedia_conf *conf,
|
|
unsigned src_slot,
|
|
unsigned sink_slot );
|
|
|
|
|
|
/**
|
|
* Disconnect unidirectional audio from all sources to the specified sink slot.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param sink_slot Sink slot.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t)
|
|
pjmedia_conf_disconnect_port_from_sources( pjmedia_conf *conf,
|
|
unsigned sink_slot);
|
|
|
|
|
|
/**
|
|
* Disconnect unidirectional audio from the specified source to all sink slots.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param src_slot Source slot.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t)
|
|
pjmedia_conf_disconnect_port_from_sinks( pjmedia_conf *conf,
|
|
unsigned src_slot);
|
|
|
|
|
|
/**
|
|
* Get number of ports currently registered to the conference bridge.
|
|
*
|
|
* @param conf The conference bridge.
|
|
*
|
|
* @return Number of ports currently registered to the conference
|
|
* bridge.
|
|
*/
|
|
PJ_DECL(unsigned) pjmedia_conf_get_port_count(pjmedia_conf *conf);
|
|
|
|
|
|
/**
|
|
* Get total number of ports connections currently set up in the bridge.
|
|
*
|
|
* @param conf The conference bridge.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(unsigned) pjmedia_conf_get_connect_count(pjmedia_conf *conf);
|
|
|
|
|
|
/**
|
|
* Remove the specified port from the conference bridge.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot The port index to be removed.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_remove_port( pjmedia_conf *conf,
|
|
unsigned slot );
|
|
|
|
|
|
|
|
/**
|
|
* Enumerate occupied ports in the bridge.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param ports Array of port numbers to be filled in.
|
|
* @param count On input, specifies the maximum number of ports
|
|
* in the array. On return, it will be filled with
|
|
* the actual number of ports.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_enum_ports( pjmedia_conf *conf,
|
|
unsigned ports[],
|
|
unsigned *count );
|
|
|
|
|
|
/**
|
|
* Get port info.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot Port index.
|
|
* @param info Pointer to receive the info.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_get_port_info( pjmedia_conf *conf,
|
|
unsigned slot,
|
|
pjmedia_conf_port_info *info);
|
|
|
|
|
|
/**
|
|
* Get occupied ports info.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param size On input, contains maximum number of infos
|
|
* to be retrieved. On output, contains the actual
|
|
* number of infos that have been copied.
|
|
* @param info Array of info.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_get_ports_info(pjmedia_conf *conf,
|
|
unsigned *size,
|
|
pjmedia_conf_port_info info[]
|
|
);
|
|
|
|
|
|
/**
|
|
* Get last signal level transmitted to or received from the specified port.
|
|
* This will retrieve the "real-time" signal level of the audio as they are
|
|
* transmitted or received by the specified port. Application may call this
|
|
* function periodically to display the signal level to a VU meter.
|
|
*
|
|
* The signal level is an integer value in zero to 255, with zero indicates
|
|
* no signal, and 255 indicates the loudest signal level.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot Slot number.
|
|
* @param tx_level Optional argument to receive the level of signal
|
|
* transmitted to the specified port (i.e. the direction
|
|
* is from the bridge to the port).
|
|
* @param rx_level Optional argument to receive the level of signal
|
|
* received from the port (i.e. the direction is from the
|
|
* port to the bridge).
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_get_signal_level(pjmedia_conf *conf,
|
|
unsigned slot,
|
|
unsigned *tx_level,
|
|
unsigned *rx_level);
|
|
|
|
|
|
/**
|
|
* Adjust the level of signal received from the specified port.
|
|
* Application may adjust the level to make signal received from the port
|
|
* either louder or more quiet. The level adjustment is calculated with this
|
|
* formula: <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using
|
|
* this, zero indicates no adjustment, the value -128 will mute the signal,
|
|
* and the value of +128 will make the signal 100% louder, +256 will make it
|
|
* 200% louder, etc.
|
|
*
|
|
* The level adjustment value will stay with the port until the port is
|
|
* removed from the bridge or new adjustment value is set. The current
|
|
* level adjustment value is reported in the media port info when
|
|
* the #pjmedia_conf_get_port_info() function is called.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot Slot number of the port.
|
|
* @param adj_level Adjustment level, which must be greater than or equal
|
|
* to -128. A value of zero means there is no level
|
|
* adjustment to be made, the value -128 will mute the
|
|
* signal, and the value of +128 will make the signal
|
|
* 100% louder, +256 will make it 200% louder, etc.
|
|
* See the function description for the formula.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_adjust_rx_level( pjmedia_conf *conf,
|
|
unsigned slot,
|
|
int adj_level );
|
|
|
|
|
|
/**
|
|
* Adjust the level of signal to be transmitted to the specified port.
|
|
* Application may adjust the level to make signal transmitted to the port
|
|
* either louder or more quiet. The level adjustment is calculated with this
|
|
* formula: <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using
|
|
* this, zero indicates no adjustment, the value -128 will mute the signal,
|
|
* and the value of +128 will make the signal 100% louder, +256 will make it
|
|
* 200% louder, etc.
|
|
*
|
|
* The level adjustment value will stay with the port until the port is
|
|
* removed from the bridge or new adjustment value is set. The current
|
|
* level adjustment value is reported in the media port info when
|
|
* the #pjmedia_conf_get_port_info() function is called.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param slot Slot number of the port.
|
|
* @param adj_level Adjustment level, which must be greater than or equal
|
|
* to -128. A value of zero means there is no level
|
|
* adjustment to be made, the value -128 will mute the
|
|
* signal, and the value of +128 will make the signal
|
|
* 100% louder, +256 will make it 200% louder, etc.
|
|
* See the function description for the formula.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_adjust_tx_level( pjmedia_conf *conf,
|
|
unsigned slot,
|
|
int adj_level );
|
|
|
|
|
|
/**
|
|
* Adjust the level of signal to be transmitted from the source slot to the
|
|
* sink slot.
|
|
* Application may adjust the level to make signal transmitted from the source
|
|
* slot to the sink slot either louder or more quiet. The level adjustment is
|
|
* calculated with this formula:
|
|
* <b><tt>output = input * (adj_level+128) / 128</tt></b>. Using this, zero
|
|
* indicates no adjustment, the value -128 will mute the signal, and the value
|
|
* of +128 will make the signal 100% louder, +256 will make it 200% louder,
|
|
* etc.
|
|
*
|
|
* The level adjustment value will stay with the connection until the
|
|
* connection is removed or new adjustment value is set. The current level
|
|
* adjustment value is reported in the media port info when the
|
|
* #pjmedia_conf_get_port_info() function is called.
|
|
*
|
|
* @param conf The conference bridge.
|
|
* @param src_slot Source slot.
|
|
* @param sink_slot Sink slot.
|
|
* @param adj_level Adjustment level, which must be greater than or equal
|
|
* to -128. A value of zero means there is no level
|
|
* adjustment to be made, the value -128 will mute the
|
|
* signal, and the value of +128 will make the signal
|
|
* 100% louder, +256 will make it 200% louder, etc.
|
|
* See the function description for the formula.
|
|
*
|
|
* @return PJ_SUCCESS on success.
|
|
*/
|
|
PJ_DECL(pj_status_t) pjmedia_conf_adjust_conn_level( pjmedia_conf *conf,
|
|
unsigned src_slot,
|
|
unsigned sink_slot,
|
|
int adj_level );
|
|
|
|
|
|
|
|
PJ_END_DECL
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
#endif /* __PJMEDIA_CONF_H__ */
|
|
|