D-Modem/pjproject-2.11.1/pjmedia/include/pjmedia-codec/silk.h
2021-10-29 14:41:03 -04:00

133 lines
4.4 KiB
C

/* $Id$ */
/*
* Copyright (C) 2012-2012 Teluu Inc. (http://www.teluu.com)
* Contributed by Regis Montoya (aka r3gis - www.r3gis.fr)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __PJMEDIA_CODEC_SILK_H__
#define __PJMEDIA_CODEC_SILK_H__
/**
* @file silk.h
* @brief SILK codec.
*/
#include <pjmedia-codec/types.h>
/**
* @defgroup PJMED_SILK SILK Codec Family
* @ingroup PJMEDIA_CODEC_CODECS
* @brief Implementation of SILK codecs (narrow/medium/wide/superwide-band).
* @{
*
* This section describes functions to initialize and register SILK codec
* factory to the codec manager. After the codec factory has been registered,
* application can use @ref PJMEDIA_CODEC API to manipulate the codec.
*
* The SILK codec uses multiple bit rates, and supports super wideband
* (24 kHz sampling rate), wideband (16 kHz sampling rate), medium (12kHz
* sampling rate), and narrowband (telephone quality, 8 kHz sampling rate).
*
* By default, the SILK codec factory registers two SILK codecs:
* "SILK/8000" narrowband codec and "SILK/16000" wideband codec. This behavior
* can be changed by specifying #pjmedia_codec_silk_options flags during
* initialization.
*
*
* \section codec_setting Codec Settings
*
* \subsection general_setting General Settings
*
* General codec settings for this codec such as VAD and PLC can be
* manipulated through the <tt>setting</tt> field in #pjmedia_codec_param.
* Please see the documentation of #pjmedia_codec_param for more info.
*
* \subsection specific_setting Codec Specific Settings
*
* The following settings are applicable for this codec.
*
* \subsubsection quality_vs_complexity Quality vs Complexity
*
* The SILK codec quality versus computational complexity and bandwidth
* requirement can be adjusted by modifying the quality and complexity
* setting, by calling #pjmedia_codec_silk_set_config().
*
* The default setting of quality is specified in
* #PJMEDIA_CODEC_SILK_DEFAULT_QUALITY. And the default setting of
* complexity is specified in #PJMEDIA_CODEC_SILK_DEFAULT_COMPLEXITY.
*/
PJ_BEGIN_DECL
typedef struct pjmedia_codec_silk_setting
{
pj_bool_t enabled; /**< Enable/disable. */
int quality; /**< Encoding quality, or use -1 for default
(@see PJMEDIA_CODEC_SILK_DEFAULT_QUALITY). */
int complexity; /**< Encoding complexity, or use -1 for default
(@see PJMEDIA_CODEC_SILK_DEFAULT_COMPLEXITY)*/
} pjmedia_codec_silk_setting;
/**
* Initialize and register SILK codec factory to pjmedia endpoint. By default,
* only narrowband (8kHz sampling rate) and wideband (16kHz sampling rate)
* will be enabled. Quality and complexity for those sampling rate modes
* will be set to the default values (see #PJMEDIA_CODEC_SILK_DEFAULT_QUALITY
* and #PJMEDIA_CODEC_SILK_DEFAULT_COMPLEXITY), application may modify these
* settings via #pjmedia_codec_silk_set_config().
*
* @param endpt The pjmedia endpoint.
*
* @return PJ_SUCCESS on success.
*/
PJ_DECL(pj_status_t) pjmedia_codec_silk_init(pjmedia_endpt *endpt);
/**
* Change the configuration setting of the SILK codec for the specified
* clock rate.
*
* @param clock_rate PCM sampling rate, in Hz, valid values are 8000,
* 12000, 16000 and 24000.
* @param opt The setting to be applied for the specified
* clock rate.
*
* @return PJ_SUCCESS on success.
*/
PJ_DECL(pj_status_t) pjmedia_codec_silk_set_config(
unsigned clock_rate,
const pjmedia_codec_silk_setting *opt);
/**
* Unregister SILK codec factory from pjmedia endpoint and deinitialize
* the SILK codec library.
*
* @return PJ_SUCCESS on success.
*/
PJ_DECL(pj_status_t) pjmedia_codec_silk_deinit(void);
PJ_END_DECL
/**
* @}
*/
#endif /* __PJMEDIA_CODEC_SILK_H__ */