bird/distro/pkg/deb/bird.xml

287 lines
11 KiB
XML
Raw Permalink Normal View History

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
<!--
`xsltproc -''-nonet \
-''-param man.charmap.use.subset "0" \
-''-param make.year.ranges "1" \
-''-param make.single.year.ranges "1" \
/usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
manpage.xml'
A manual page <package>.<section> will be generated. You may view the
manual page with: nroff -man <package>.<section> | less'. A typical entry
in a Makefile or Makefile.am is:
DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/nwalsh/manpages/docbook.xsl
XP = xsltproc -''-nonet -''-param man.charmap.use.subset "0"
manpage.1: manpage.xml
$(XP) $(DB2MAN) $<
The xsltproc binary is found in the xsltproc package. The XSL files are in
docbook-xsl. A description of the parameters you can use can be found in the
docbook-xsl-doc-* packages. Please remember that if you create the nroff
version in one of the debian/rules file targets (such as build), you will need
to include xsltproc and docbook-xsl in your Build-Depends control field.
Alternatively use the xmlto command/package. That will also automatically
pull in xsltproc and docbook-xsl.
Notes for using docbook2x: docbook2x-man does not automatically create the
AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as
<refsect1> ... </refsect1>.
To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections
read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be
found in the docbook-xsl-doc-html package.
Validation can be done using: `xmllint -''-noout -''-valid manpage.xml`
General documentation about man-pages and man-page-formatting:
man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/
-->
<!ENTITY dhfirstname "Giovanni">
<!ENTITY dhsurname "Mascellani">
<!ENTITY dhusername "&dhfirstname; &dhsurname;">
<!ENTITY dhemail "mascellani@poisson.phc.unipi.it">
<!ENTITY dhsection "8">
<!ENTITY dhtitle "BIRD User Manual">
]>
<refentry>
<refentryinfo>
<title>&dhtitle;</title>
<productname>bird</productname>
<authorgroup>
<author>
<firstname>&dhfirstname;</firstname>
<surname>&dhsurname;</surname>
<contrib>Wrote this manpage for the Debian system.</contrib>
<address>
<email>&dhemail;</email>
</address>
</author>
</authorgroup>
<copyright>
<year>2010</year>
<holder>&dhusername;</holder>
</copyright>
<legalnotice>
<para>This manual page was written for the Debian system
(and may be used by others).</para>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License,
Version 2 or (at your option) any later version published by
the Free Software Foundation.</para>
<para>On Debian systems, the complete text of the GNU General Public
License can be found in
<filename>/usr/share/common-licenses/GPL</filename>.</para>
</legalnotice>
</refentryinfo>
<refmeta>
<refentrytitle>bird</refentrytitle>
<manvolnum>&dhsection;</manvolnum>
</refmeta>
<refnamediv>
<refname>bird</refname>
<refpurpose>BIRD Internet Routing Daemon</refpurpose>
</refnamediv>
<refnamediv>
<refname>birdc</refname>
<refpurpose>BIRD Internet Routing Daemon remote control</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>bird</command>
<arg choice="opt"><option>-c <replaceable>config-file</replaceable></option></arg>
<arg choice="opt"><option>-d</option></arg>
<arg choice="opt"><option>-D <replaceable>debug-file</replaceable></option></arg>
<arg choice="opt"><option>-f</option></arg>
<arg choice="opt"><option>-g <replaceable>group</replaceable></option></arg>
<arg choice="opt"><option>-l</option></arg>
<arg choice="opt"><option>-p</option></arg>
<arg choice="opt"><option>-P <replaceable>pid-file</replaceable></option></arg>
<arg choice="opt"><option>-R</option></arg>
<arg choice="opt"><option>-s <replaceable>control-socket</replaceable></option></arg>
<arg choice="opt"><option>-u <replaceable>user</replaceable></option></arg>
</cmdsynopsis>
<cmdsynopsis>
<command>birdc</command>
<arg choice="opt"><option>-l</option></arg>
<arg choice="opt"><option>-r</option></arg>
<arg choice="opt"><option>-s <replaceable>control-socket</replaceable></option></arg>
<arg choice="opt"><option>-v</option></arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1 id="description">
<title>DESCRIPTION</title>
<para><command>bird</command> is an Internet Routing Daemon. That is,
it sends and receives messages using different protocols in order to
discover and exchange routing information with other routing daemons
present on the same network. It is able to talk the most widely
known routing protocols (such as BGPv4, RIPv2, OSPFv2 and OSPFv3),
both on IPv4 and IPv6 and it features a very powerful language for
route filtering.</para>
<para><command>birdc</command> is a remote control for <command>bird</command>.
While <command>bird</command> is running, the system administrator can
connect to it using <command>birdc</command>, to inspect its internal
status and reconfigure it. The two processes use a Unix socket to
communicate. Once started, <command>bird</command> will give access
to an interactive shell: commands can be completed with TAB and help
can be requested by pressing the key `?'. More documentation on
the available commands can be foung on the website, see below.</para>
</refsect1>
<refsect1 id="options">
<title>OPTIONS</title>
<para>The <command>bird</command> accepts these options:</para>
<variablelist>
<varlistentry>
<term><option>-c <replaceable>config-file</replaceable></option></term>
<listitem>
<para>Use given configuration file instead of the default /etc/bird/bird.conf.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-d</option></term>
<listitem>
<para>Enable debug messages to stderr, and run bird in foreground.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-D <replaceable>debug-file</replaceable></option></term>
<listitem>
<para>Enable debug messages to given file.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-f</option></term>
<listitem>
<para>Run bird in foreground.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-g <replaceable>group</replaceable></option></term>
<listitem>
<para>Run bird with given group ID.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--help</option></term>
<listitem>
<para>Display command-line options to bird.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-l</option></term>
<listitem>
<para>Look for a configuration file and a communication socket in the
current working directory instead of in default system locations.
However, paths specified by options <option>-c</option>,
<option>-s</option> have higher priority.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-p</option></term>
<listitem>
<para>Just parse the config file and exit. Return value is zero if the
config file is valid, nonzero if there are some errors.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-P <replaceable>pid-file</replaceable></option></term>
<listitem>
<para>Create a PID file with given filename.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-R</option></term>
<listitem>
<para>Apply graceful restart recovery after start.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-s <replaceable>control-socket</replaceable></option></term>
<listitem>
<para>Use given filename for a socket for communications with the
client (remote control), default is /run/bird/bird.ctl.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-u <replaceable>user</replaceable></option></term>
<listitem>
<para>Drop privileges and run as given user instead of root. The bird
would keep CAP_NET_ADMIN and other network-related capabilities
necessary for its function.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--version</option></term>
<listitem>
<para>Display bird version.</para>
</listitem>
</varlistentry>
</variablelist>
<para>The <command>birdc</command> accepts these options:</para>
<variablelist>
<varlistentry>
<term><option>-l</option></term>
<listitem>
<para>Look for a communication socket in the current working directory.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-r</option></term>
<listitem>
<para>Run <command>birdc</command> in restricted mode: only the
`show ...' commands are allowed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-s <replaceable>control-socket</replaceable></option></term>
<listitem>
<para>Use given filename for a socket for communications with the
server, default is /run/bird/bird.ctl.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-v</option></term>
<listitem>
<para>Numeric return codes are dumped along with messages, making
them easily parsable by a program. See the programmer's documentation
for information about their meanings.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1 id="files">
<title>FILES</title>
<variablelist>
<varlistentry>
<term><filename>/etc/bird/bird.conf</filename></term>
<listitem>
<para>The system-wide configuration file to control the
behaviour of <application>bird</application>. See
the website for more documentation.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1 id="see_also">
<title>SEE ALSO</title>
<para>More documentation con be found on the website:
https://bird.network.cz/.</para>
</refsect1>
</refentry>