bird/doc/reply_codes

Reply codes of BIRD command-line interface
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
0xxx	Action suceessfully completed
1xxx	Table entry
2xxx	Table heading
8xxx	Run-time error
9xxx	Parse-time error
<space>	Continuation
+	Spontaneous printout

0000	OK
0001	Welcome
0002	Reading configuration
0003	Reconfigured
0004	Reconfiguration in progress
0005	Reconfiguration already in progress, queueing
0006	Reconfiguration ignored, shutting down
0007	Shutdown ordered
0008	Already disabled
0009	Disabled
0010	Already enabled
0011	Enabled
0012	Restarted
0013	Status report
0014	Route count
0015	Reloading
0016	Access restricted
0017	Reconfiguration already in progress, removing queued config
0018	Reconfiguration confirmed
0019	Nothing to do (configure undo/confirm)
0020	Configuration OK
0021	Undo requested
0022	Undo scheduled
0023	Evaluation of expression

1000	BIRD version
1001	Interface list
1002	Protocol list
1003	Interface address
1004	Interface flags
1005	Interface summary
1006	Protocol details
1007	Route list
1008	Route details
1009	Static route list
1010	Symbol list
1011	Uptime
1012	Route extended attribute list
1013	Show ospf neighbors
1014	Show ospf
1015	Show ospf interface
1016	Show ospf state/topology
1017	Show ospf lsadb
1018	Show memory
1019	Show ROA list
1020	Show BFD sessions

8000	Reply too long
8001	Route not found
8002	Configuration file error
8003	No protocols match
8004	Stopped due to reconfiguration
8005	Protocol is down => cannot dump
8006	Reload failed
8007	Access denied
8008	Evaluation runtime error

9000	Command too long
9001	Parse error
9002	Invalid symbol type
Started a list of CLI reply codes. 1999-11-01 01:48:21 +08:00			`Reply codes of BIRD command-line interface`
			`~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
			`0xxx Action suceessfully completed`
`show interfaces' and `show protocols' works. 1999-11-30 20:57:14 +08:00			`1xxx Table entry`
			`2xxx Table heading`
Started a list of CLI reply codes. 1999-11-01 01:48:21 +08:00			`8xxx Run-time error`
			`9xxx Parse-time error`
			`<space> Continuation`
			`+ Spontaneous printout`

			`0000 OK`
			`0001 Welcome`
First attempt on dynamic reconfiguration. There are still lots of bugs and problems to solve, but the hardest part works. 2000-01-17 00:44:50 +08:00			`0002 Reading configuration`
Converted shutdown to a kind of reconfiguration, it's no more handled as a exception in protocol state machines. Introduced a `shutdown' CLI command. Killed few reconfiguration bugs. 2000-01-17 01:40:26 +08:00			`0003 Reconfigured`
			`0004 Reconfiguration in progress`
			`0005 Reconfiguration already in progress, queueing`
			`0006 Reconfiguration ignored, shutting down`
			`0007 Shutdown ordered`
Reworked proto lists -- each proto is now in two lists: the global one (proto_list) and per-type one (original lists). A lot of things simplified. Implemented `disable', `enable' and `restart' CLI commands. 2000-01-17 07:30:06 +08:00			`0008 Already disabled`
			`0009 Disabled`
			`0010 Already enabled`
			`0011 Enabled`
			`0012 Restarted`
Made `show status' show uptime and time of last reconfiguration. 2000-03-13 06:44:54 +08:00			`0013 Status report`
Implemented `show route <...> stats'. 2000-05-07 19:28:59 +08:00			`0014 Route count`
Finishes 'route reload' feature. 2009-12-14 08:32:37 +08:00			`0015 Reloading`
Restricted read-only CLI. Also adds support for executing commands using birdc <cmd>. 2010-02-21 16:57:26 +08:00			`0016 Access restricted`
Implements undo command and optional timeout for configuration Several new configure command variants: configure undo - undo last reconfiguration configure timeout - configure with scheduled undo if not confirmed in timeout configure confirm - confirm last configuration configure check - just parse and validate config file 2012-12-26 19:40:48 +08:00			`0017 Reconfiguration already in progress, removing queued config`
			`0018 Reconfiguration confirmed`
			`0019 Nothing to do (configure undo/confirm)`
			`0020 Configuration OK`
			`0021 Undo requested`
			`0022 Undo scheduled`
Implements eval command and minor CLI cleanups. Implemented eval command can be used to evaluate expressions. The patch also documents echo command and allows to use log classes instead of integer as a mask for echo. 2013-07-25 19:15:32 +08:00			`0023 Evaluation of expression`
Started a list of CLI reply codes. 1999-11-01 01:48:21 +08:00
`show interfaces' and `show protocols' works. 1999-11-30 20:57:14 +08:00			`1000 BIRD version`
			`1001 Interface list`
Added few basic commands: show status, show interfaces [summary], show protocols (incomplete). 1999-11-25 23:35:30 +08:00			`1002 Protocol list`
`show interfaces' and `show protocols' works. 1999-11-30 20:57:14 +08:00			`1003 Interface address`
			`1004 Interface flags`
			`1005 Interface summary`
			`1006 Protocol details`
Added dumping of routing tables (`show route'). This includes filtering. 1999-12-01 23:10:21 +08:00			`1007 Route list`
			`1008 Route details`
Implemented `show static'. It's a relatively good example of how to write show commands for other protocols. 1999-12-03 19:41:23 +08:00			`1009 Static route list`
Split off general commands to cmds.c. Added `show symbols' command which dumps whole symbol table together with symbol types etc. 2000-01-19 20:30:19 +08:00			`1010 Symbol list`
Made `show status' show uptime and time of last reconfiguration. 2000-03-13 06:44:54 +08:00			`1011 Uptime`
Changed initialization of protocol list -- now we call proto_build() instead of calling the protocols manually. Implemented printing of dynamic attributes in `show route all'. Each protocol can now register its own attribute class (protocol->attr_class, set to EAP_xxx) and also a callback for naming and formatting of attributes. The callback can return one of the following results: GA_UNKNOWN Attribute not recognized. GA_NAME Attribute name recognized and put to the buffer, generic code should format the value. GA_FULL Both attribute name and value put to the buffer. Please update protocols generating dynamic attributes to provide the attr_class and formatting hook. 2000-04-01 18:19:47 +08:00			`1012 Route extended attribute list`
Cisco-like "show ospf neighbors" implemented. 2000-06-01 23:53:06 +08:00			`1013 Show ospf neighbors`
Some other reply codes allocated. 2000-06-02 00:45:10 +08:00			`1014 Show ospf`
			`1015 Show ospf interface`
Finishes 'route reload' feature. 2009-12-14 08:32:37 +08:00			`1016 Show ospf state/topology`
Minor doc update. 2009-12-15 06:08:48 +08:00			`1017 Show ospf lsadb`
Implements command that shows memory usage. 2010-06-03 04:20:40 +08:00			`1018 Show memory`
Some minor changes to CLI. 2012-03-22 18:46:38 +08:00			`1019 Show ROA list`
Fixes a reply code. 2013-11-25 18:06:00 +08:00			`1020 Show BFD sessions`
Added few basic commands: show status, show interfaces [summary], show protocols (incomplete). 1999-11-25 23:35:30 +08:00
Started a list of CLI reply codes. 1999-11-01 01:48:21 +08:00			`8000 Reply too long`
Added dumping of routing tables (`show route'). This includes filtering. 1999-12-01 23:10:21 +08:00			`8001 Route not found`
First attempt on dynamic reconfiguration. There are still lots of bugs and problems to solve, but the hardest part works. 2000-01-17 00:44:50 +08:00			`8002 Configuration file error`
Reworked proto lists -- each proto is now in two lists: the global one (proto_list) and per-type one (original lists). A lot of things simplified. Implemented `disable', `enable' and `restart' CLI commands. 2000-01-17 07:30:06 +08:00			`8003 No protocols match`
Added commands `show route protocol <p>' and `show route import <p>' which show the routing table as exported to the protocol given resp. as returned from its import control hook. To get handling of filtered extended attributes right (even in the old `show route where <filter>' command), the get_route_info hook gets an attribute list and all protocol specific rte attributes are contained there as temporary ones. Updated RIP to do that. Added ea_append() which joins two ea_list's. 2000-05-07 06:57:39 +08:00			`8004 Stopped due to reconfiguration`
			`8005 Protocol is down => cannot dump`
Finishes 'route reload' feature. 2009-12-14 08:32:37 +08:00			`8006 Reload failed`
Restricted read-only CLI. Also adds support for executing commands using birdc <cmd>. 2010-02-21 16:57:26 +08:00			`8007 Access denied`
Implements eval command and minor CLI cleanups. Implemented eval command can be used to evaluate expressions. The patch also documents echo command and allows to use log classes instead of integer as a mask for echo. 2013-07-25 19:15:32 +08:00			`8008 Evaluation runtime error`
Started a list of CLI reply codes. 1999-11-01 01:48:21 +08:00
			`9000 Command too long`
			`9001 Parse error`
Remember protocol instance in proto_config and use that for `show protocols <name>'. 1999-11-30 22:04:09 +08:00			`9002 Invalid symbol type`