Reduce number of chapters -- having subchapter for 2 lines of code looks ugly in output.

This commit is contained in:
Pavel Machek 2000-05-29 12:23:49 +00:00
parent 0e694e041a
commit 4f88ac47c6

View file

@ -455,8 +455,6 @@ if 1234 = i then printn "."; else { print "*** FAIL: if 1 else"; }
<sect1>Device <sect1>Device
<sect2>Introduction
<p>The Device protocol is not a real routing protocol as it doesn't generate <p>The Device protocol is not a real routing protocol as it doesn't generate
any routes and only serves as a module for getting information about network any routes and only serves as a module for getting information about network
interfaces from the kernel. interfaces from the kernel.
@ -465,7 +463,7 @@ interfaces from the kernel.
this protocol in the configuration since almost all other protocol this protocol in the configuration since almost all other protocol
require network interfaces to be defined in order to work. require network interfaces to be defined in order to work.
<sect2>Configuration <p>Only configurable thing is interface scan time:
<p><descrip> <p><descrip>
<tag>scan time <m/number/</tag> Time in seconds between two scans <tag>scan time <m/number/</tag> Time in seconds between two scans
@ -475,12 +473,8 @@ require network interfaces to be defined in order to work.
notifications, so the default time is set to a large value. notifications, so the default time is set to a large value.
</descrip> </descrip>
<sect2>Attributes
<p>As the Device protocol doesn't generate any routes, it cannot have <p>As the Device protocol doesn't generate any routes, it cannot have
any attributes. any attributes. Example configuration looks really simple:
<sect2>Example
<p><code> <p><code>
protocol device { protocol device {
@ -490,8 +484,6 @@ protocol device {
<sect1>Direct <sect1>Direct
<sect2>Introduction
<p>The Direct protocol is a simple generator of device routes for all the <p>The Direct protocol is a simple generator of device routes for all the
directly connected networks according to the list of interfaces provided directly connected networks according to the list of interfaces provided
by the kernel via the Device protocol. by the kernel via the Device protocol.
@ -501,7 +493,7 @@ unless you want to use BIRD as a route server or a route reflector, that is
on a machine which doesn't forward packets and only participates in on a machine which doesn't forward packets and only participates in
distribution of routing information. distribution of routing information.
<sect2>Configuration <p>Only configurable thing about direct is what interfaces it watches:
<p><descrip> <p><descrip>
<tag>interface <m/pattern [, ...]/</tag> By default, the Direct <tag>interface <m/pattern [, ...]/</tag> By default, the Direct
@ -512,11 +504,9 @@ distribution of routing information.
just use this clause. just use this clause.
</descrip> </descrip>
<sect2>Attributes
<p>Direct device routes don't contain any specific attributes. <p>Direct device routes don't contain any specific attributes.
<sect2>Example <p>Example config might look like this:
<p><code> <p><code>
protocol direct { protocol direct {
@ -632,8 +622,6 @@ protocol rip MyRIP_test {
<sect1>Static <sect1>Static
<sect2>Introduction
<p>The static protocol doesn't communicate with other routers in the network, <p>The static protocol doesn't communicate with other routers in the network,
but instead it allows you to define routes manually which is often used for but instead it allows you to define routes manually which is often used for
specifying how to forward packets to parts of the network which don't use specifying how to forward packets to parts of the network which don't use
@ -653,8 +641,6 @@ the next hop of the route is not a neighbor at the moment), Static just
uninstalls the route from the table its connected to and adds it again as soon uninstalls the route from the table its connected to and adds it again as soon
as the destinations becomes adjacent again. as the destinations becomes adjacent again.
<sect2>Configuration
<p>The Static protocol has no configuration options. Instead, the <p>The Static protocol has no configuration options. Instead, the
definition of the protocol contains a list of static routes which definition of the protocol contains a list of static routes which
can contain: can contain:
@ -669,11 +655,9 @@ can contain:
it as administratively prohibited. it as administratively prohibited.
</descrip> </descrip>
<sect2>Attributes
<p>Static routes have no specific attributes. <p>Static routes have no specific attributes.
<sect2>Example <p>Example static config might look like this:
<p><code> <p><code>
protocol static { protocol static {