Added brief description of client features. Grammar really is not good place to write help from, so please check this.

This commit is contained in:
Pavel Machek 2000-06-07 15:27:16 +00:00
parent 3e82b32d36
commit 64722c9852

View file

@ -283,7 +283,7 @@ protocol rip {
<tag>passwords { password "<m/password/" from <m/time/ to <m/time/ passive <m/time/ id <tag>passwords { password "<m/password/" from <m/time/ to <m/time/ passive <m/time/ id
<m/num/ [...] }</tag> Specifies passwords to be used with this protocol. <cf>Passive <m/time/</cf> is <m/num/ [...] }</tag> Specifies passwords to be used with this protocol. <cf>Passive <m/time/</cf> is
time from which the password is not used for sending, but it is recognized on reception. <cf/id/ is password ID, as needed by time from which the password is not used for sending, but it is recognized on reception. <cf/id/ is password ID, as needed by
certain protocols. certain protocols. Format of <cf><m/time/</cf> is <tt>dd-mm-yy HH:MM:SS</tt>.
<tag>interface "<m/mask/"|<m/prefix/ [ { <m/option/ ; [ ... ] } ]</tag> Specifies which <tag>interface "<m/mask/"|<m/prefix/ [ { <m/option/ ; [ ... ] } ]</tag> Specifies which
interfaces this protocol is active on, and allows you to set options on interfaces this protocol is active on, and allows you to set options on
@ -309,6 +309,24 @@ codes. You do not necessarily need to use BIRDC to talk to BIRD, your
own application could do that, too -- format of communication between own application could do that, too -- format of communication between
BIRD and BIRDC is stable (see programmer's documentation). BIRD and BIRDC is stable (see programmer's documentation).
<p>Here is very brief list of supported functions:
<descrip>
<tag>dump resources|sockets|interfaces|neighbors|attributs|routes|protocols</tag>
Send requested information to a standard logging facility.
<tag>show status|protocols [all]|interfaces [summary]|symbols</tag>
Show requested information on client.
<tag>show route [<m/prefix/|for <m/prefix or IP/] [table <m/name/] [table <m/sym/] [all] [stats] [count] [primary] [filter <m/name/] [import_or_proto <m/sym/]</tag>
Show contents of the routing table, possibly filtered by the filter. If you put <cf><m/prefix/</cf> on the line, only routes to given destination are shown. You can also make list more verbose by using <cf/all/ or limit routes to be shown to those from given protocol (using <cf/import_or_proto/).
<tag>enable|disable|restart <m/name/|all</tag>
Enable/disable or restart given protocol.
<tag>debug <m/protocol/|<m/pattern/|all all|off|{ states | routes | filters | events | packets }
Control protocol debugging.
</descrip>
<chapt>Filters <chapt>Filters
@ -513,14 +531,12 @@ attributes just like it accesses variables. Attempt to access undefined
attribute result in a runtime error; you can check if an attribute is attribute result in a runtime error; you can check if an attribute is
defined using the <cf>defined( <m>attribute</m> )</cf> operator. defined using the <cf>defined( <m>attribute</m> )</cf> operator.
<!-- fixme: say which are read-only -->
<descrip> <descrip>
<tag><m/prefix/ net</tag> <tag><m/prefix/ net</tag>
Network the route is talking about. Read-only. (See the section about routing tables.) Network the route is talking about. Read-only. (See the section about routing tables.)
<tag><m/enum/ scope</tag> <tag><m/enum/ scope</tag>
Address scope of the network (<cf/SCOPE_HOST/ for addresses local to this host, <cf/SCOPE_LINK/ for those specific for a physical link, ... <!-- FIXME -->) Address scope of the network (<cf/SCOPE_HOST/ for addresses local to this host, <cf/SCOPE_LINK/ for those specific for a physical link, <cf/SCOPE_SITE/, <cf/SCOPE_ORGANIZATION/, <cf/SCOPE_UNIVERSE/)
<tag><m/int/ preference</tag> <tag><m/int/ preference</tag>
Preference of the route. (See section about routing tables.) Preference of the route. (See section about routing tables.)
@ -877,8 +893,7 @@ protocol kernel { # Secondary routing table
<sect1>Introduction <sect1>Introduction
<p>Open Shortest Path First (OSPF) is a quite complex interior gateway <p>Open Shortest Path First (OSPF) is a quite complex interior gateway
protocol. The current IPv4 version (OSPFv2) is defined in RFC 2328 protocol. The current IPv4 version (OSPFv2) is defined in RFC 2328<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2328.txt">. It's a link
<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2328.txt">. It's a link
state (a.k.a. shortest path first) protocol -- Each router maintains a database state (a.k.a. shortest path first) protocol -- Each router maintains a database
describing the autonomous system's topology. Each participating router describing the autonomous system's topology. Each participating router
has an identical copy of the database and all routers run the same algorithm has an identical copy of the database and all routers run the same algorithm
@ -1188,7 +1203,7 @@ RIP) and all routers know that network is unreachable. RIP tries to minimize sit
counting to infinity is necessary, because it is slow. Due to infinity being 16, you can't use counting to infinity is necessary, because it is slow. Due to infinity being 16, you can't use
RIP on networks where maximal distance is higher than 15 hosts. You can read more about rip at <HTMLURL RIP on networks where maximal distance is higher than 15 hosts. You can read more about rip at <HTMLURL
URL="http://www.ietf.org/html.charters/rip-charter.html" name="http://www.ietf.org/html.charters/rip-charter.html">. Both IPv4 URL="http://www.ietf.org/html.charters/rip-charter.html" name="http://www.ietf.org/html.charters/rip-charter.html">. Both IPv4
(RFC ????<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc????.txt">) (RFC 1723<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc1723.txt">)
and IPv6 (RFC 2080<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2080.txt">) versions of RIP are supported by BIRD, historical RIPv1 (RFC 1058<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc1058.txt">)is and IPv6 (RFC 2080<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2080.txt">) versions of RIP are supported by BIRD, historical RIPv1 (RFC 1058<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc1058.txt">)is
not currently supported. RIPv4 md5 authentication (RFC 2082<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2082.txt">) is supported. not currently supported. RIPv4 md5 authentication (RFC 2082<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc2082.txt">) is supported.
@ -1352,4 +1367,5 @@ LocalWords: EGP misconfigurations keepalive pref aggr aggregator BIRD's RTC
LocalWords: OS'es AS's multicast nolisten misconfigured UID blackhole MRTD LocalWords: OS'es AS's multicast nolisten misconfigured UID blackhole MRTD
LocalWords: uninstalls ethernets IP binutils ANYCAST anycast dest RTD ICMP rfc LocalWords: uninstalls ethernets IP binutils ANYCAST anycast dest RTD ICMP rfc
LocalWords: compat multicasts nonbroadcast pointopoint LocalWords: compat multicasts nonbroadcast pointopoint
LocalWords: Perl SIGHUP dd mm yy HH MM SS EXT IA UNICAST multihop Discriminator txt
--> -->