Commit graph

69 commits

Author SHA1 Message Date
Martin Mares
c51f132d58 First usable version of the client. No command completion and similar nifty
features yet, but it works.
2000-02-15 12:18:37 +00:00
Martin Mares
4b87e256eb Split off general commands to cmds.c.
Added `show symbols' command which dumps whole symbol table together
with symbol types etc.
2000-01-19 12:30:19 +00:00
Martin Mares
3ea1ba632b Killed protocol->priority. Protocol startup should be clean and hack-free now.
It seems everything still works (except for disable/enable/restart which hangs
sometimes, but it's another story).
2000-01-18 11:01:03 +00:00
Martin Mares
fb89b1a4ce Removed point-to-point tunnel hack as it breaks ordinary PtP interfaces.
I'll find a better solution soon.
2000-01-17 12:40:00 +00:00
Martin Mares
d272fe22dd Separated `official protocol names' used in status dumps from name templates
used for automatic generation of instance names.

	protocol->name is the official name
	protocol->template is the name template (usually "name%d"),
		should be all lowercase.

Updated all protocols to define the templates, checked that their configuration
grammar includes proto_name which generates the name and interns it in the
symbol table.
2000-01-17 11:52:50 +00:00
Martin Mares
f14a4becbe Reworked proto lists -- each proto is now in two lists: the global one
(proto_list) and per-type one (original lists). A lot of things simplified.

Implemented `disable', `enable' and `restart' CLI commands.
2000-01-16 23:30:06 +00:00
Martin Mares
30a6108ccc Added filter_same() for comparision of two filters.
Pavel, please implement this as soon as possible.
2000-01-16 17:49:32 +00:00
Martin Mares
bf8558bc9c Converted shutdown to a kind of reconfiguration, it's no more handled
as a exception in protocol state machines. Introduced a `shutdown'
CLI command. Killed few reconfiguration bugs.
2000-01-16 17:40:26 +00:00
Martin Mares
50fe90edf3 First attempt on dynamic reconfiguration. There are still lots of bugs
and problems to solve, but the hardest part works.
2000-01-16 16:44:50 +00:00
Martin Mares
476e108425 Minor cleanups. 1999-12-16 13:51:43 +00:00
Martin Mares
e693ddff87 Handle cases when SIOCGIFINDEX is defined, but doesn't work (new glibc
with 2.0 kernels).
1999-12-16 13:23:32 +00:00
Martin Mares
67ece6df42 Tried to clean up multicast handling. Now we don't try to guess
multicast abilities depending on definedness of symbols and use hard-wired
system-dependent configuration defines instead.

Please test whereever you can.
1999-12-16 13:06:13 +00:00
Martin Mares
6aea8905c4 TODO entries and FIXME's. 1999-12-16 12:18:33 +00:00
Martin Mares
30bc402ebb Temporary work-arounds for multicast problems. Needs further investigation. 1999-12-08 15:12:54 +00:00
Martin Mares
34350a5270 Implemented echoing of log messages to CLI connections. Just try `echo all'. 1999-12-06 12:34:45 +00:00
Martin Mares
305a01f57b Added DEBUG commands.
Removed CLI tests, real commands now serve as much better examples.
1999-12-04 23:17:29 +00:00
Martin Mares
430da60fa2 Implemented `show route where <condition>' command.
Pavel, please check my addition to filter/config.Y.
1999-12-02 14:04:44 +00:00
Martin Mares
9c3726afd2 Updated TODO file. 1999-12-01 15:17:24 +00:00
Martin Mares
730f2e2c8c Added dumping of routing tables (`show route'). This includes filtering. 1999-12-01 15:10:21 +00:00
Martin Mares
1d2664a4d4 Remember protocol instance in proto_config and use that for
`show protocols <name>'.
1999-11-30 14:04:09 +00:00
Martin Mares
99bbd23b22 More CLI plans... 1999-11-18 14:41:43 +00:00
Martin Mares
bff1db7629 Added skeleton of command tree. Please inspect. 1999-11-17 14:58:21 +00:00
Martin Mares
dce267832a Basic support for IPv6. The system-dependent part doesn't work yet,
but the core routines are there and seem to be working.

   o  lib/ipv6.[ch] written
   o  Lexical analyser recognizes IPv6 addresses and when in IPv6
      mode, treats pure IPv4 addresses as router IDs.
   o  Router ID must be configured manually on IPv6 systems.
   o  Added SCOPE_ORGANIZATION for org-scoped IPv6 multicasts.
   o  Fixed few places where ipa_(hton|ntoh) was called as a function
      returning converted address.
1999-08-03 19:36:06 +00:00
Martin Mares
707ef83378 Pruned the TODO list. 1999-08-03 19:35:01 +00:00
Martin Mares
7de45ba4a0 Kernel route syncer supports multiple tables.
The changes are just too extensive for lazy me to list them
there, but see the comment at the top of sysdep/unix/krt.c.
The code got a bit more ifdeffy than I'd like, though.

Also fixed a bunch of FIXME's and added a couple of others. :)
1999-08-03 19:33:22 +00:00
Martin Mares
9a706f32af Added missing structure declarations. 1999-08-03 19:31:11 +00:00
Martin Mares
9273035403 Changes to interface handling on traditional Unices:
o  Aliases are interpreted as secondary addresses.
  o  When the system doesn't supply interface indices, generate
     our ones.
1999-08-03 19:30:20 +00:00
Martin Mares
5e13ffe6f4 Faster checksum function. 1999-08-03 19:29:57 +00:00
Martin Mares
913f7dc9f2 Added functions for parsing and formatting of dates. 1999-08-03 19:29:27 +00:00
Pavel Machek
6bd08d017b Better date/time input methods need to be done 1999-05-26 14:22:41 +00:00
Martin Mares
a07e9d8235 Added --with-sysinclude to allow explicitly setting where kernel includes
reside, so that you can easily switch between 2.0 and 2.2 ones.

Check existence of <linux/rtnetlink.h> for linux-22 configs to make sure
we're using the correct set of includes.
1999-05-21 14:09:06 +00:00
Martin Mares
b23c5e0ff4 Added ip_skip_header() and modified OSPF to use it. 1999-05-14 18:03:09 +00:00
Martin Mares
a2697f02ac Netlink support for secondary interface addresses. 1999-05-07 13:46:16 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
ec8b579e9c Recognize site scope for IPv4 addresses (prefixes reserved for private
networks).

Removed old #ifndef logic which was used to avoid IPv4/IPv6 clashes
before conditionals in Modules lists were introduced.
1999-04-27 16:03:17 +00:00
Martin Mares
08e2d6259a Removed TOS support. This simplifies many things a lot. 1999-04-12 18:01:07 +00:00
Martin Mares
5a99ade413 Fixed a couple of bugs in handling of multicast sockets.
See comments in lib/socket.h for a detailed guide on how to use them.
1999-04-12 14:57:46 +00:00
Martin Mares
69ec9087ad Added new protocol hook for dumping of protocol-dependent route
attributes.

Please implement in all protocols.
1999-04-03 13:01:58 +00:00
Martin Mares
6accdf4f43 Updated the TODO list. 1999-03-29 20:46:00 +00:00
Martin Mares
7e5f5ffdda Moved to a much more systematic way of configuring kernel protocols.
o  Nothing is configured automatically. You _need_ to specify
     the kernel syncer in config file in order to get it started.
  o  Syncing has been split to route syncer (protocol "Kernel") and
     interface syncer (protocol "Device"), device routes are generated
     by protocol "Direct" (now can exist in multiple instances, so that
     it will be possible to feed different device routes to different
     routing tables once multiple tables get supported).

See doc/bird.conf.example for a living example of these shiny features.
1999-03-26 21:44:38 +00:00
Martin Mares
2d14045224 Rewrote the kernel syncer. The old layering was horrible.
The new kernel syncer is cleanly split between generic UNIX module
and OS dependent submodules:

  -  krt.c (the generic part)
  -  krt-iface (low-level functions for interface handling)
  -  krt-scan (low-level functions for routing table scanning)
  -  krt-set (low-level functions for setting of kernel routes)

krt-set and krt-iface are common for all BSD-like Unices, krt-scan is heavily
system dependent (most Unices require /dev/kmem parsing, Linux uses /proc),
Netlink substitues all three modules.

We expect each UNIX port supports kernel routing table scanning, kernel
interface table scanning, kernel route manipulation and possibly also
asynchronous event notifications (new route, interface state change;
not implemented yet) and build the KRT protocol on the top of these
primitive operations.
1999-03-03 19:49:56 +00:00
Martin Mares
7972248d5d Netlink module supports interface scan on startup. Working on more. 1999-03-02 18:37:02 +00:00
Martin Mares
b982b6db2b Implemented netlink protocol parsing functions. More to come tomorrow. 1999-03-01 22:31:27 +00:00
Martin Mares
bdb95a21a4 Added skeletal version of Linux netlink interface. It doesn't work yet,
but the framework is there and I'll try finish it soon.
1999-03-01 20:17:46 +00:00
Martin Mares
12be9b8c18 Pruned the TODO list. 1999-03-01 17:51:29 +00:00
Martin Mares
b5fe3dc21c Cleaned up TODO file.
That's all for today, midnight gets closer.
1999-02-13 22:13:04 +00:00
Martin Mares
726141746b '#' comments in config files are equivalent to end of line, therefore
also to implicit ';'.
1999-02-13 21:34:33 +00:00
Martin Mares
7f3d1a0850 Squashed one bug in timing of route scans. 1999-02-13 19:57:19 +00:00
Martin Mares
4e9498cbb1 config->router_id works again. 1999-02-13 18:42:00 +00:00
Martin Mares
67bd949a52 Real implementation of protocol state machines. Delayed startup/shutdown
should work now. Initial feeding of protocols by interfaces/routes is
done from the event queue to prevent unwanted recursion.
1999-02-11 22:59:06 +00:00