Commit graph

18 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
b174cc0abc Babel: Add MAC authentication support - update
Some cleanups and bugfixes to the previous patch, including:

 - Fix rate limiting in index mismatch check

 - Fix missing BABEL_AUTH_INDEX_LEN in auth_tx_overhead computation

 - Fix missing auth_tx_overhead recalculation during reconfiguration

 - Fix pseudoheader construction in babel_auth_sign() (sport vs fport)

 - Fix typecasts for ptrdiffs in log messages

 - Make auth log messages similar to corresponding RIP/OSPF ones

 - Change auth log messages for events that happen during regular
   operation to debug messages

 - Switch meaning of babel_auth_check*() functions for consistency
   with corresponding RIP/OSPF ones

 - Remove requirement for min/max key length, only those required by
   given MAC code are enforced
2021-06-06 16:28:18 +02:00
Toke Høiland-Jørgensen
b218a28f61 Babel: Add MAC authentication support
This implements support for MAC authentication in the Babel protocol, as
specified by RFC 8967. The implementation seeks to follow the RFC as close
as possible, with the only deliberate deviation being the addition of
support for all the HMAC algorithms already supported by Bird, as well as
the Blake2b variant of the Blake algorithm.

For description of applicability, assumptions and security properties,
see RFC 8967 sections 1.1 and 1.2.
2021-06-06 16:28:18 +02:00
Ondrej Zajicek (work)
c26c6bc2d7 Show info from multiple protocols when protocol is not specified
Most commands like 'show ospf neighbors' fail when protocol is not
specified and there are multiple instances of given protocol type.
This is annoying in BIRD 2, as many protocols have IPv4 and IPv6
instances. The patch changes that by showing output from all protocol
instances of appropriate type.

Note that the patch also removes terminating cli_msg() call from these
commands and moves it to the common iterating code.
2020-06-28 15:38:47 +02:00
Maria Matejka
78976974e7 Dynamic attributes definition split whether it is bitmask or not. 2019-07-03 00:00:11 +02:00
Maria Matejka
c0e958e022 Filter + Config: Fix bugs, tests and split symbols by type 2019-02-20 22:30:54 +01:00
Maria Matejka
4c553c5a5b Filter refactoring: dropped the recursion from the interpreter
This is a major change of how the filters are interpreted. If everything
works how it should, it should not affect you unless you are hacking the
filters themselves.

Anyway, this change should make a huge improvement in the filter performance
as previous benchmarks showed that our major problem lies in the
recursion itself.

There are also some changes in nest and protocols, related mostly to
spreading const declarations throughout the whole BIRD and also to
refactored dynamic attribute definitions. The need of these came up
during the whole work and it is too difficult to split out these
not-so-related changes.
2019-02-20 22:30:54 +01:00
Jan Maria Matejka
f851f0d7e3 Config: Dropping CF_ADDTO. 2018-06-26 14:29:03 +02:00
Jan Maria Matejka
13c0be19d3 Nest: Removing separate tmpa from route propagation
This is a fundamental change of an original (1999) concept of route
processing inside BIRD. During import/export, there was a temporary
ea_list created which was to be used instead of the another one inside
the route itself.

This led to some confusion, quirks, and strange filter code that handled
extended route attributes. Dropping it now.

The protocol interface has changed in an uniform way -- the
`struct ea_list *attrs` argument has been removed from store_tmp_attrs(),
import_control(), rt_notify() and get_route_info().
2018-05-30 17:08:49 +02:00
Ondrej Zajicek (work)
70fab17837 Babel: Add option to randomize router ID
When a Babel node restarts, it loses its sequence number, which can cause
its routes to be rejected by peers until the state is cleared out by other
nodes in the network (which can take on the order of minutes).

There are two ways to fix this: Having stable storage to keep the sequence
number across restarts, or picking a different router ID each time.

This implements the latter, by introducing a new option that will cause
BIRD to randomize a high 32 bits of router ID every time it starts up.
This avoids the problem at the cost of not having stable router IDs in
the network.

Thanks to Toke Hoiland-Jorgensen for the patch.
2018-05-03 16:55:11 +02:00
Ondrej Zajicek (work)
d0f47327f8 Merge branch 'master' into int-new 2018-03-07 17:41:49 +01:00
Ondrej Zajicek (work)
2d6d4b8053 Babel: Fix build with restricted protocol set
All keywords used in Babel config have to be declared locally.

Thanks to Leo Vandewoestijne for the bugreport.
2018-03-07 17:35:24 +01:00
Ondrej Zajicek (work)
3b3b0910ff Babel: More changes and bugfixes
Several changes and bugfixes in Babel, namely:

- Exported route parameters stored directly in route table entry
- Exported non-babel routes no longer stored in per-entry route list
- Route update, selection and retraction simplified and fixed
- Route feasibility is evalualated per update and stored with route
- Unreachable route handling fixed, based on hold interval
- Added 'show babel routes' command

Overall, it fixes some issues with proper propagation of triggered
updates, making Babel convergence after topology change almost
instant.
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
b47eaefe12 Babel: Revamp cost computation and run route selection when cost change
Also fix several minor bugs and add 'limit' option for k-out-of-j
link sensing strategy. Change default from 8-of-16 to 12-of-16.
Change IHU expiry factor from 1.5 to 3.5 (as in RFC 6126).
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
8b58f565e4 Babel: Update to new timers 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
4324025f98 Babel: Add support for dual-stack IPv4/IPv6 operation
This adds support for dual-stack v4/v6 operation to the Babel protocol.
Routing messages will be exchanged over IPv6, but IPv4 routes can be
carried in the messages being exchanged. This matches how the reference
Babel implementation (babeld) works.

The nexthop address for v4 can be configured per interface, and will
default to the first available IPv4 address on the given interface. For
symmetry, a configuration option to configure the IPv6 nexthop address
is also added.

Thanks to Toke Høiland-Jørgensen <toke@toke.dk> for the patch.
2017-06-08 12:18:16 +02:00
Ondrej Zajicek (work)
5e8df049fb Babel: Update to integrated branch 2016-12-10 00:44:13 +01:00
Ondrej Zajicek (work)
321ff8c404 Babel: Make sure intervals do not overflow
Intervals are carried as 16-bit centisecond values, but kept internally
in 16-bit second values, which causes a potential for overflow. This adds
some checks to make sure this does not happen.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2016-07-19 11:57:20 +02:00
Ondrej Zajicek (work)
937e75d8f1 Add the Babel routing protocol (RFC 6126)
This patch implements the IPv6 subset of the Babel routing protocol.
Based on the patch from Toke Hoiland-Jorgensen, with some heavy
modifications and bugfixes.

Thanks to Toke Hoiland-Jorgensen for the original patch.
2016-04-28 18:01:40 +02:00