Ondrej Zajicek
0da562a7cb
Fixes error message in 'show route' cmd.
...
Message 'Network not in table' was not reported if a network node without
any routes was found in a routing table.
2014-11-08 23:52:42 +01:00
Ondrej Zajicek
7aa809016e
Implements show route noexport option.
...
Shows routes that would be exported to the protocol but are rejected by
the export filter.
2014-10-02 12:52:50 +02:00
Ondrej Zajicek
1123e70740
Implements token bucket filter for rate limiting.
2014-10-02 12:52:50 +02:00
Ondrej Zajicek
0479b44373
Fixes some warnings.
2014-10-02 12:52:50 +02:00
Ondrej Zajicek
9eceab33f9
String constants could be used for string option values.
...
Thanks to Frederik Kriewitz for the patch.
2014-05-29 23:05:03 +02:00
Ondrej Zajicek
1149aa977d
Fixes a problem with undoing of deconfiguring of protocol.
...
Thanks to Sergey Popovich for the original patch.
2014-05-05 11:05:12 +02:00
Ondrej Zajicek
c865cae3eb
Fixes 'show route export' w.r.t. protocols with different RA_* types.
2014-04-28 17:31:03 +02:00
Ondrej Zajicek
984d734944
Fixes limit verification during reconfiguration.
2014-04-27 00:46:32 +02:00
Ondrej Zajicek
1cb0f83d29
Fixes some asserts.
2014-04-07 11:48:25 +02:00
Ondrej Zajicek
d7c0628591
Check validity of interface definitions.
...
Thanks to Aleksey Berezin for the bugreport.
2014-03-31 01:52:28 +02:00
Ondrej Zajicek
227af309e5
Fixes some minor issues in graceful restart.
2014-03-24 12:32:12 +01:00
Ondrej Zajicek
6eda3f135f
Documentation (and minor fixes) for BGP graceful restart.
2014-03-23 01:35:33 +01:00
Ondrej Zajicek
0c791f873a
BGP graceful restart support.
...
Also significant core protocol state changes needed for that,
global graceful restart recovery state and kernel proto support
for recovery.
2014-03-20 14:07:12 +01:00
Ondrej Zajicek
5c200e0a4d
Merge branch 'add-path'
2014-02-06 20:15:05 +01:00
Ondrej Zajicek
6601a14831
Merge branch 'add-path'
2013-12-10 22:30:46 +01:00
Ondrej Zajicek
2d0b7e24a5
Fixes problem with source address selection in BGP and BFD.
2013-12-02 11:54:32 +01:00
Ondrej Zajicek
e7d2ac4401
Finishes add-path.
...
Fixes some bugs and uses generic hash implementation.
2013-12-01 13:49:42 +01:00
Ondrej Zajicek
283c7dfada
Merge branch 'master' into add-path
2013-11-25 18:42:47 +01:00
Ondrej Zajicek
5ebc92935c
Last state change should track protocol state change.
...
And not core state change, which is not much relevant
(e.g. refeed in BGP).
2013-11-24 22:22:24 +01:00
Ondrej Zajicek
e4d179f2c2
Minor changes to default router ID calculation.
2013-11-24 12:50:53 +01:00
Ondrej Zajicek
736e143fa5
Merge branch 'master' into add-path
...
Conflicts:
filter/filter.c
nest/proto.c
nest/rt-table.c
proto/bgp/bgp.h
proto/bgp/config.Y
2013-11-23 11:50:34 +01:00
Ondrej Zajicek
0aeac9cb7f
Merge commit 'origin/bfd'
2013-11-22 02:48:44 +01:00
Ondrej Zajicek
548c329cde
Adds rate limiting to some log messages.
2013-11-22 01:21:15 +01:00
Ondrej Zajicek
7c9930f9c8
Adds a missing file.
...
I forgot to add that to the previous commit.
2013-11-21 11:36:49 +01:00
Ondrej Zajicek
1ec522538f
BFD protocol, ready for release.
...
Supports OSPF and BGP and also statically configured sessions.
2013-11-19 22:33:48 +01:00
Ondrej Zajicek
a15dab76f9
Implements 'allow local as' option.
...
Similar to allowas-in option on other routers.
2013-10-21 14:59:35 +02:00
Ondrej Zajicek
0e175f9f0f
Fixes some BFD bugs and makes logging thread-safe.
2013-10-05 20:12:28 +02:00
Ondrej Zajicek
7ccb36d330
Implements C.len operator for clist and eclist types.
...
Thanks to Sergey Popovich for the original patch.
2013-10-02 14:57:29 +02:00
Ondrej Zajicek
28a10f84cb
Some fixes in filter code.
...
Thanks to Sergey Popovich for original patches.
2013-10-02 14:41:37 +02:00
Ondrej Filip
ec57bbf67f
Recheck export/import/receive limits during reconfiguration.
2013-09-30 14:07:34 +02:00
Ondrej Zajicek
4df2019ebf
Fixes build issues without BGP.
...
Thanks to Sergey Popovich for the patch.
2013-09-26 17:36:30 +02:00
Ondrej Zajicek
f83ce94d5e
Fixes missing unregister of kernel table handling code.
...
And some minor fixes.
Thanks to Sergey Popovich for the patch.
2013-09-26 17:33:00 +02:00
Ondrej Zajicek
6a8d3f1c1f
BFD work in progress.
...
Now it compiles and mostly works.
2013-09-16 23:57:40 +02:00
Ondrej Zajicek
92f8878cbf
Fixes a bug related to multiple IPs and direct protocol.
...
Multiple IPs in the same IP prefix confuse the direct
protocol and could cause withdrawal of a valid prefix.
Thanks to Dan Rimal for a bugreport.
2013-09-10 13:03:58 +02:00
Ondrej Zajicek
bff9ce5130
Extends delete/filter operators to work no bgp_paths.
2013-08-15 01:06:47 +02:00
Ondrej Zajicek
508d936078
Implements eval command and minor CLI cleanups.
...
Implemented eval command can be used to evaluate expressions.
The patch also documents echo command and allows to use log classes
instead of integer as a mask for echo.
2013-07-25 13:15:32 +02:00
Ondrej Zajicek
9135c1f0ca
Fixes bug in protocol flushing and rtable pruning.
...
When route was propagated to another rtable through a pipe and then the
pipe was reconfigured softly in such a way that any subsequent route
updates are filtered, then the source protocol shutdown didn't clean up
the route in the second rtable which caused stale routes and potential
crashes.
2013-07-24 14:11:12 +02:00
Ondrej Zajicek
cc31b75a8f
Implements 'bgppath ~ int set' filter op.
2013-07-09 23:27:10 +02:00
Ondrej Zajicek
ef4a50be10
Better packet priority and traffic class handling.
...
Implements support for IPv6 traffic class, sets higher priority for OSPF
and RIP outgoing packets by default and allows to configure ToS/DS/TClass
IP header field and the local priority of outgoing packets.
2013-06-24 16:37:30 +02:00
Ondrej Zajicek
fad04c750c
Fixes problems with kernel routes multiple routing tables.
...
Temporary dummy routes created by a kernel protocol during routing table
scan get mixed with real routes propagated from another kernel protocol
through a pipe.
2013-06-13 11:27:14 +02:00
Ondrej Zajicek
cd3b02d198
Allows IP of loopback to be used in automatic router ID selection.
...
Thanks to Alexander V. Chernikov for the patch.
2013-04-16 17:53:22 +02:00
Ondrej Filip
e667622a35
Default rounting table for 'show route export/preexport/protocol' is the one related to a respective protocol.
2013-02-25 10:39:46 +01:00
Ondrej Filip
9d969be5f2
I still believe that 0 == NULL, however this patch will make Santiago happy. :-)
2013-02-14 23:35:51 +01:00
Ondrej Filip
0bc3542ab6
Route limits can be disabled - this makes sense for protocol templates
2013-02-10 19:06:56 +01:00
Ondrej Zajicek
36da2857bc
Implements router advertisements activated by received routes.
...
The RAdv protocol could be configured to change its behavior based on
availability of routes, e.g., do not announce router lifetime when a
default route is not available.
2013-02-08 23:58:27 +01:00
Ondrej Zajicek
b662290f40
Separate import and receive limits.
...
They have different behavior w.r.t. filtered routes that are kept.
2013-01-10 13:07:33 +01:00
Ondrej Zajicek
79b4e12e60
Implements interface masks for choosing router id.
...
Router ID could be automatically determined based of subset of
ifaces/addresses specified by 'router id from' option. The patch also
does some minor changes related to router ID reconfiguration.
Thanks to Alexander V. Chernikov for most of the work.
2012-12-27 12:56:23 +01:00
Ondrej Zajicek
a92cf57dd6
Implements undo command and optional timeout for configuration
...
Several new configure command variants:
configure undo - undo last reconfiguration
configure timeout - configure with scheduled undo if not confirmed in timeout
configure confirm - confirm last configuration
configure check - just parse and validate config file
2012-12-26 12:40:48 +01:00
Ondrej Zajicek
7057752924
Fixes route tracing w.r.t. kept filtered routes.
2012-11-16 13:29:16 +01:00
Ondrej Zajicek
1555095795
Changes 'rejected' to 'filtered' in one of the last patches.
2012-11-15 01:29:01 +01:00