Commit graph

3950 commits

Author SHA1 Message Date
Maria Matejka
c0e958e022 Filter + Config: Fix bugs, tests and split symbols by type 2019-02-20 22:30:54 +01:00
Maria Matejka
713658798d GDB pretty printers: f_inst and f_val. 2019-02-20 22:30:54 +01:00
Maria Matejka
9b46748d5b Filter: refactoring of instruction constructors 2019-02-20 22:30:54 +01:00
Maria Matejka
4c553c5a5b Filter refactoring: dropped the recursion from the interpreter
This is a major change of how the filters are interpreted. If everything
works how it should, it should not affect you unless you are hacking the
filters themselves.

Anyway, this change should make a huge improvement in the filter performance
as previous benchmarks showed that our major problem lies in the
recursion itself.

There are also some changes in nest and protocols, related mostly to
spreading const declarations throughout the whole BIRD and also to
refactored dynamic attribute definitions. The need of these came up
during the whole work and it is too difficult to split out these
not-so-related changes.
2019-02-20 22:30:54 +01:00
Maria Matejka
967b88d938 Filter refactoring: The instructions are converted to the switch body by M4 2019-02-20 22:30:54 +01:00
Maria Matejka
8436040735 Filter refactoring: Drop the roa check specific f_inst 2019-02-20 22:30:54 +01:00
Maria Matejka
ca2ee91a80 Filter refactoring: The constant f_val is simply included inside the instruction
With 32 bits, size of the args is 12 bytes, the f_val is 20 bytes.
With 64 bits, size of the args is 24 bytes, the f_val the same.

This is not so nice on 32 bits, anyway the f_inst itself is
24 vs. 32 bytes and the overall size of filters must be 32k of
instructions to get to one megabyte of RAM eaten by f_inst.

Therefore it seems to be improbable for common user to get into
problems with this change.
2019-02-20 22:30:54 +01:00
Maria Matejka
7f0ac73724 Filter refactoring: Changed arguments from separate unions to an array 2019-02-20 22:30:54 +01:00
Maria Matejka
224b77d4f7 Filter refactoring: Converted condition to three-args instruction 2019-02-20 22:30:54 +01:00
Maria Matejka
8e8b1fe48c Filter refactoring: Some instructions eat up excessively much space. 2019-02-20 22:30:54 +01:00
Maria Matejka
c577493908 Filter refactoring: Expanded the short instructions with common code.
This will make the further changes more straightforward.
2019-02-20 22:30:54 +01:00
Maria Matejka
a8740d6c09 Filter refactoring: indentation fix 2019-02-20 22:30:54 +01:00
Jan Maria Matejka
fc8df41ec6 Filter refactoring: The values are now saved on a custom stack.
This shall help with performance.
2019-02-20 22:30:54 +01:00
Jan Maria Matejka
7afa143886 Filter refactoring: Passing the resulting struct f_val as a pointer.
This also drops the multiplexing of errors with the f_val itself
together with the T_RETURN f_val type flag.
2019-02-20 22:30:54 +01:00
Jan Maria Matejka
f62a369fb4 Filter refactoring: Moved filter instruction definition to a separate file 2019-02-20 22:30:54 +01:00
Jan Maria Matejka
25566c6810 Filter refactoring: Moved the bitfield bit position formula to route.h 2019-02-20 22:30:54 +01:00
Jan Maria Matejka
aca8263926 Filter refactoring: Moved the interpret macros inside the block 2019-02-20 22:30:54 +01:00
Jan Maria Matejka
02dcbf343d Configure: Don't check for implicit fallthrough unless when debugging. 2019-02-20 22:30:53 +01:00
Jan Maria Matejka
a946317fab Filter: Converted static global variables to a filter_state struct.
The static filter state was messy and blocked the planned parallel
execution of filters. Anyway, this will be also slower as the state
structure must be passed almost everywhere with us.
2019-02-20 22:30:53 +01:00
Ondrej Zajicek (work)
ae294cc2d0 HTML are no longer generated in srcdir 2019-02-19 18:30:28 +01:00
Ondrej Zajicek (work)
900fda4411 Doc: Detect SP/OpenSP automatically 2019-02-19 18:20:07 +01:00
Ondrej Zajicek (work)
3a8ca7abbc Nest: Prevent withdraws from propagation back to source protocol (for accepted mode)
Update for one of previous patches, handles the the issue for
first-accepted mode of route propagation.
2019-02-19 16:26:09 +01:00
Ondrej Zajicek (work)
bf8d7bba9e OSPF: Reset LSAs during area type change
When area is reconfigured to a different type, we need to flush LSAs as
they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we
have have just one OSPF area and that changes type, we could restart OSPF
as there is no state to keep anyway. That solves issue with different
handling of external routes exported to OSPF based of main area type.
2019-02-17 01:54:01 +01:00
Ondrej Zajicek (work)
4a3f5b3617 OSPF: Basic support for DN-bit handling (RFC 4576)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are
marked by DN flag and they are ignored by other OSPF routers with VPN-PE
enabled.
2019-02-13 15:53:36 +01:00
Ondrej Zajicek (work)
1e958e52d3 OSPF: Do not originate Router-Information LSA
As we do not have much usage for it yet.
2019-02-09 16:15:01 +01:00
Ondrej Zajicek (work)
cd16538fc9 Merge remote-tracking branch 'origin/mq-opt' 2019-02-09 15:53:16 +01:00
Ondrej Zajicek (work)
6e8fb66859 Nest: Improve export counter handling
One of previous workarounds for phantom route avoidance breaks export
counters by expanding sending of spurious withdraws, which are send when
we are not sure whether we have advertised that routes in the past.
If not, then export counter is decreased, but it was not increased
before, so it overflows under zero.

The patch fixes that by sendung spurious withdraws, but not counting them
on export counter. That may lead to error in the other direction, but that
happens only as a race condition (i.e., in normal operation filters
return proper values about old route export state).
2019-02-05 19:00:43 +01:00
Ondrej Zajicek (work)
52fdd1cb76 Nest: Report preferred counters also when 'import keep filtered' is enabled
Thanks to Michal Nowak for reporting the issue.
2019-02-05 15:59:26 +01:00
Ondrej Zajicek (work)
a9b97cbcb7 OSPF: Send direct acknowledgements as unicast
Direct acknowledgements should be send as unicast to a corresponding
neighbor. Only delayed acks should be send as multicast to all/designated
routers.
2019-02-03 20:22:40 +01:00
Ondrej Zajicek (work)
16605f2fda OSPF: Reject duplicate DBDES packets after dead interval
Master may free last DBDES packet immediately. Slave must wait dead
interval before freeing last DBDES packet and then reject duplicate
DBDES packets with SeqNumberMismatch.
2019-02-03 17:31:27 +01:00
Ondrej Zajicek (work)
9c94583a3d OSPF: DD seqnum should be initialized only for first attempts
After SeqNumberMismatch/BadLSReq, we should continue with the old
seqnum++. The old code tries to do that by n->adj, but it was set
nowhere.
2019-02-03 16:20:37 +01:00
Ondrej Zajicek (work)
267da8138d OSPF: Reject DBDES packets with non-matching MTU
As it is specified in RFC 2328. The old code just provided warning.
2019-02-03 15:45:43 +01:00
Ondrej Zajicek (work)
e1c275d87b Nest: Reestablish preferred counters 2019-02-02 13:28:16 +01:00
Maria Matejka
f9b97f1c62 Perf: Added forgotten all-protocol options 2019-02-01 14:09:01 +01:00
Maria Matejka
a8d0f2516c Nest: FIB rehash values tweaked for better performance 2019-01-31 15:10:51 +01:00
Maria Matejka
e85e37d91d Perf: Prune the table after every loop to have clean state. 2019-01-31 15:05:40 +01:00
Maria Matejka
7411b694c3 Perf: Write also BIRD version to have all the needed data in the logfile 2019-01-31 15:03:43 +01:00
Maria Matejka
c65a9a05f9 Nest: Don't lookup net in table before filters are run.
Using dummy net instead. This should help with performance on rejected
routes.
2019-01-31 15:02:15 +01:00
Ondrej Zajicek (work)
e84c81b76f Nest: Prevent withdraws from propagation back to source protocol
The earlier fix loosen conditions for not running filters on old
route when deciding about route propagation to a protocol to avoid
issues with ghost routes in some race conditions.

Unfortunately, the fix also caused back-propagation of withdraws. For
regular updates, back-propagation is prevented in import_control hooks,
but these are not called on withdraws. For them, import_control hooks
are called on old routes instead, changing (old, NULL) notification
to (NULL, NULL), which is ignored. By not calling export processing
in some cases, the withdraw is not ignored and is back-propagated.

This patch fixes that by contract conditions so the earlier fix is not
applied to back-propagated updates.
2019-01-30 17:25:21 +01:00
Ondrej Zajicek (work)
ee95f281f0 Doc: Add documentation for OSPF retransmit delay option
Thanks to Igor Podlesny for notification.
2019-01-26 21:02:35 +01:00
Ondrej Zajicek (work)
1c730ee761 Doc: Remove doc for already removed option 2019-01-26 20:44:37 +01:00
Ondrej Zajicek (work)
b8a3608aa5 BGP: Cleanup channels when going down
When going up, uncleaned old channel state may trigger unexpected
conditions crashing bird.
2019-01-26 19:48:16 +01:00
Ondrej Zajicek (work)
5a50a98980 OSPF: Opaque LSAs and Router Information LSA
Add support for OSPFv2 Opaque LSAs (RFC 5250) and for Router Information
LSA (RFC 7770). The second part is here mainly for testing opaque LSAs.
2019-01-24 22:45:27 +01:00
Jan Maria Matejka
9548888599 Nest: Don't make tmp_attr before preexport is called 2019-01-17 13:50:47 +01:00
Ondrej Zajicek (work)
3e60932a28 NEWS and version update 2019-01-05 00:38:37 +01:00
Ondrej Zajicek (work)
d7e8f00e7e Unix: Remove removed option from help
Also includes minor cleanup of help.
2019-01-04 23:49:26 +01:00
Ondrej Zajicek (work)
a1ee5eb2aa BSD: Fix TCP-MD5 code on current FreeBSD kernels
Current FreeBSD kernels require SA records for both directions.

Thanks to Joseph Mulloy and Andrey V. Elsukov for reporting and
solving the issue.
2019-01-04 18:21:27 +01:00
Ondrej Zajicek (work)
4d9049dc1a Doc: README and INSTALL update
Minor cleanups, updates and clarifications. Also removes (incomplete
and well-known) build steps from README, as they are better described
in INSTALL.
2019-01-03 17:26:52 +01:00
Ondrej Zajicek (work)
470740f97b BGP: Better dispatch of incoming connections
Since v2 we have multiple listening BGP sockets, and each BGP protocol
has associated one of them. Use listening socket that accepted the
incoming connection as a key in the dispatch process so only BGP
protocols assocaited with that listening socket can be selected.
This is necesary for proper dispatch when VRFs are used.
2019-01-02 16:01:21 +01:00
Ondrej Zajicek (work)
e16b0aef31 BGP: Postpone setting link_addr
It may happen that the LLv6 address for given iface is not defined during
BGP start, so we postpone the check to the the session establishment.
2019-01-02 15:57:14 +01:00