Commit graph

180 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
7e5f769d91 BGP: Handle case where capabilites are not used
If peer does not announce capabilities at all, or when we have
capabilities disabled, handle that as implicit IPv4 unicast.
2019-03-18 14:29:12 +01:00
Ondrej Zajicek (work)
b8a3608aa5 BGP: Cleanup channels when going down
When going up, uncleaned old channel state may trigger unexpected
conditions crashing bird.
2019-01-26 19:48:16 +01:00
Ondrej Zajicek (work)
470740f97b BGP: Better dispatch of incoming connections
Since v2 we have multiple listening BGP sockets, and each BGP protocol
has associated one of them. Use listening socket that accepted the
incoming connection as a key in the dispatch process so only BGP
protocols assocaited with that listening socket can be selected.
This is necesary for proper dispatch when VRFs are used.
2019-01-02 16:01:21 +01:00
Ondrej Zajicek (work)
e16b0aef31 BGP: Postpone setting link_addr
It may happen that the LLv6 address for given iface is not defined during
BGP start, so we postpone the check to the the session establishment.
2019-01-02 15:57:14 +01:00
Ondrej Zajicek (work)
1cab2b4a7c BGP: Extend 'next hop keep' and 'next hop self' options
Extend 'next hop keep' and 'next hop self' options to have boolean values
(enabled / disabled) and also values 'ibgp'/ 'ebgp' to restrict it to
routes received from IBGP / EBGP. This allows to have it enabled by
default in some cases, matches features of other implementations, and
allows to handle some strange cases like EBGP border router with 'next
hop self' also doing IBGP route reflecting.

Change default of 'next hop keep' to enabled for route servers, and
'ibgp' for route reflectors.

Update documentation for these options.
2018-12-16 23:44:24 +01:00
Ondrej Zajicek (work)
0f40405fc9 Update RFC references
Progdoc comments do not allow SGML tags
2018-12-12 16:38:30 +01:00
Ondrej Zajicek (work)
682d3f7de0 BGP: implement Adj-RIB-In
The patch implements optional internal import table to a channel and
hooks it to BGP so it can be used as Adj-RIB-In. When enabled, all
received (pre-filtered) routes are stored there and import filters can
be re-evaluated without explicit route refresh. An import table can be
examined using e.g. 'show route import table bgp1.ipv4'.
2018-12-12 14:46:24 +01:00
Ondrej Zajicek (work)
d506263da7 Nest: Forbid adding channels during reconfiguration
When a new channel is found during reconfiguration, do force restart
of the protocol, like with any other un-reconfigurable change.

The old behavior was that the new channel was added but remained in down
state, even if the protocol was up, so a manual protocol restart was
often necessary.

In the future this should be improved such that a reconfigurable
channel addition (e.g. direct) is accepted and channel is started,
while an un-reconfigurable addition forces protocol restart.
2018-12-11 17:57:14 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
863ecfc785 The MRT protocol
The new MRT protocol is responsible for periodic RIB table dumps in the
MRT format (RFC 6396). Also the existing code for BGP4MP MRT dumps is
refactored and splitted between BGP to MRT protocols, will be more
integrated into MRT in the future.

Example:

protocol mrt {
        table "*";
        filename "%N_%F_%T.mrt";
        period 60;
}

It is partially based on the old MRT code from Pavel Tvrdik.
2018-11-20 17:45:35 +01:00
Ondrej Zajicek (work)
e19d08055a BGP: Fix VRF for listening socket
Listening socket should be bound to specified interface and VRF.

Thanks to Alexander Zubkov for the bugreport.
2018-10-26 19:11:33 +02:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Ondrej Zajicek (work)
0db7a1d69c BGP: Fix bug in show protocol related to LLGR
When channel is not active due to not be negotiated during sessino
establishment, the LLGR timer is not allocated, so we should not show it.
2018-10-01 15:35:43 +02:00
Ondrej Zajicek (work)
5bd734317c BGP: Long-lived graceful restart
The patch implements long-lived graceful restart for BGP, namely
draft-uttaro-idr-bgp-persistence-03.
2018-07-31 18:40:38 +02:00
Ondrej Zajicek (work)
586c1800c4 Nest: Neighbor cache cleanups
Simplify neighbor cache code, fix several minor bugs, and improve
handling of ONLINK flag.
2018-06-27 16:57:07 +02:00
Jan Maria Matejka
ee7e2ffd26 Protocol: Introducing an enum protocol_class
This supersedes the EAP_* constants.
2018-05-29 12:35:06 +02:00
Ondrej Zajicek (work)
3831b61966 BGP: Require explicit import and export policies for EBGP channels
To comply with RFC 8212 requirements.
2018-01-16 04:14:49 +01:00
Ondrej Zajicek (work)
e62cd03307 BGP: Fix graceful restart timer
Should use remote value, not local value.
2018-01-02 14:30:08 +01:00
Ondrej Zajicek (work)
7fc55925be Several minor fixes 2017-12-10 00:55:34 +01:00
Ondrej Zajicek (work)
dea9886454 BGP: Link check just for single-hop 2017-12-08 17:04:59 +01:00
Ondrej Zajicek (work)
ccee67ca3b BGP: Autoconfigure BGP next hops from preferred addresses 2017-12-08 02:26:17 +01:00
Ondrej Zajicek (work)
830ba75e6d Merge commit '1e8721e2aeccfbc3f533e8b8abc07582cee77e9a' into int-new 2017-12-07 21:54:47 +01:00
Ondrej Zajicek (work)
46434a3cad Merge commit '7b2c5f3d2826e3175bf31b1c36056c9efc587a2b' into int-new 2017-12-07 18:35:46 +01:00
Ondrej Zajicek (work)
a6f79ca57f Timers: Revert temporary names and remove old timer.h 2017-12-07 13:54:59 +01:00
Ondrej Zajicek (work)
cc881bd155 BGP: Update to new timers 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
d3fa9e84e9 Timers: Show sub-second times in some protocol outputs 2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
025525266f Timers: Replace old timers with microsecond timers
The old timer interface is still kept, but implemented by new timers. The
plan is to switch from the old inteface to the new interface, then clean
it up.
2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
153f02da3b Nest: Maintain separate IPv4, IPv6 and LLv6 preferred addresses
Also redesign preferred address selection and update protocols to use
appropriate preferred address.

Based on a previous work by Jan Maria Matejka.
2017-12-07 13:06:01 +01:00
Ondrej Zajicek (work)
cd1d99611e BGP: Shutdown communication (RFC 8203)
The patch implements BGP Administrative Shutdown Communication (RFC 8203)
allowing BGP operators to pass messages related to BGP session
administrative shutdown/restart. It handles both transmit and receive of
shutdown messages. Messages are logged and may be displayed by show
protocol all command.

Thanks to Job Snijders for the basic patch.
2017-09-19 19:57:52 +02:00
Ondrej Zajicek (work)
9f4908fe78 Nest: VRF support for neighbor cache and olock code
Actually much simpler than expected.
2017-09-12 15:49:36 +02:00
Ondrej Zajicek (work)
943478b00f Basic VRF support
Add basic VRF (virtual routing and forwarding) support. Protocols can be
associated with VRFs, such protocols will be restricted to interfaces
assigned to the VRF (as reported by Linux kernel) and will use sockets
bound to the VRF. E.g., different multihop BGP instances can use diffent
kernel routing tables to handle BGP TCP connections.

The VRF support is preliminary, currently there are several limitations:

- Recent Linux kernels (4.11) do not handle correctly sockets bound
to interaces that are part of VRF, so most protocols other than multihop
BGP do not work. This will be fixed by future kernel versions.

- Neighbor cache ignores VRFs. Breaks config with the same prefix on
local interfaces in different VRFs. Not much problem as single hop
protocols do not work anyways.

- Olock code ignores VRFs. Breaks config with multiple BGP peers with the
same IP address in different VRFs.

- Incoming BGP connections are not dispatched according to VRFs.
Breaks config with multiple BGP peers with the same IP address in
different VRFs. Perhaps we would need some kernel API to read VRF of
incoming connection? Or probably use multiple listening sockets in
int-new branch.

- We should handle master VRF interface up/down events and perhaps
disable associated protocols when VRF goes down. Or at least disable
associated interfaces.

- Also we should check if the master iface is really VRF iface and
not some other kind of master iface.

- BFD session request dispatch should be aware of VRFs.

- Perhaps kernel protocol should read default kernel table ID from VRF
iface so it is not necessary to configure it.

- Perhaps we should have per-VRF default table.
2017-09-06 17:38:48 +02:00
Jan Moskyto Matejka
05d47bd53e Linpool: default allocation size 2017-05-16 15:34:57 +02:00
Ondrej Zajicek (work)
e919601aaf Merge master into int-new 2017-04-28 11:19:12 +02:00
Ondrej Zajicek (work)
ffb38dfb8b Static: Support for dual-AF IGP tables
When recursive routes with hybrid next hops (e.g. IPv6 route with IPv4 next
hop) are allowed, we need both IPv4 and IPv6 IGP tables.
2017-04-12 16:04:22 +02:00
Ondrej Zajicek (work)
6fe11c9941 BGP: Simplify igp table options 2017-03-29 15:31:04 +02:00
Ondrej Zajicek (work)
c49e4a6565 BGP: Update list of supported standards 2017-03-29 13:48:23 +02:00
Ondrej Zajicek (work)
ef57b70fa5 BGP: Support for routes with mixed-AF next hops
Covers IPv4/VPNv4 routes with IPv6 next hop (RFC 5549), IPv6 routes with
IPv4 next hop (RFC 4798) and VPNv6 routes with IPv4 next hop (RFC 4659).
Unfortunately it also makes next hop hooks more messy.

Each BGP channel now could have two IGP tables, one for IPv4 next hops,
the other for IPv6 next hops.
2017-03-26 19:20:15 +02:00
Ondrej Zajicek (work)
1e37e35c3e BGP: Support for MPLS labels and VPN SAFI
Basic support for SAFI 4 and 128 (MPLS labeled IP and VPN) for IPv4 and
IPv6. Should work for route reflector, but does not properly handle
originating routes with next hop self.

Based on patches from Jan Matejka.
2017-03-22 18:16:49 +01:00
Ondrej Zajicek (work)
33b6c292c3 BGP: Allow to specify interface for regular sessions
This may be useful if multple interfaces share the same network range.

Thanks to Fritz Grimpen for the original patch.
2017-03-14 12:56:47 +01:00
Ondrej Zajicek (work)
c259669fa3 Merge branch 'master' into int-new 2017-02-08 14:34:48 +01:00
Ondrej Zajicek (work)
d8022d26fc BGP: Partial support for IPv4 routes with IPv6 next hop (RFC 5549)
Mostly capability signalling
2017-01-24 02:00:35 +01:00
Ondrej Zajicek (work)
f8aad5d5b7 Minor cleanups 2017-01-03 16:30:27 +01:00
Ondrej Zajicek (work)
256cc8ee08 BGP: Report capabilities in show protocols all 2016-12-20 17:39:59 +01:00
Ondrej Zajicek (work)
ac3ad139f6 BGP: Add support for flowspec (RFC 5575) 2016-12-07 18:29:34 +01:00
Ondrej Zajicek (work)
d15b0b0a1b BGP redesign
Integrated and extensible BGP with generalized AFI handling,
support for IPv4+IPv6 AFI and unicast+multicast SAFI.
2016-12-07 14:20:52 +01:00
Ondrej Zajicek (work)
ed1a908e53 BGP: Fix memory leak in graceful restart code
Prefix and bucket tables are initialized when entering established state
but not explicitly freed when leaving it (that is handled by protocol
restart). With graceful restart, BGP may enter and leave established
state multiple times without hard protocol restart causing memory leak.
2016-11-25 11:51:38 +01:00
Ondrej Zajicek (work)
8860e991f6 Merge branch 'master' into int-new 2016-11-08 19:27:58 +01:00
Jan Moskyto Matejka
3e236955c9 Build: switch on -Wextra, get rid of most of the warnings
There are several unresolved -Wmissing-field-initializers on older
versions of GCC than 5.1, all of them false positive.
2016-11-01 14:52:54 +01:00
Ondrej Zajicek (work)
af678af0d5 Merge remote-tracking branch 'origin/master' into int-new 2016-05-12 18:03:23 +02:00
Ondrej Zajicek (work)
a7baa09862 BSD: Add the IPsec SA/SP database entries control
Add code for manipulation with TCP-MD5 keys in the IPsec SA/SP database
at FreeBSD systems. Now, BGP MD5 authentication (RFC 2385) keys are
handled automatically on both Linux and FreeBSD.

Based on patches from Pavel Tvrdik.
2016-04-13 14:37:09 +02:00