Commit graph

192 commits

Author SHA1 Message Date
Maria Matejka
ff397df7ed Routing table is now a resource allocated from its own pool
This also fixes memory leaks from import/export tables being never
cleaned up and freed.
2021-03-30 21:56:08 +02:00
Ondrej Zajicek (work)
0a3db4c680 Minor fixes for restricted builds 2021-03-17 15:56:12 +01:00
Ondrej Zajicek (work)
2f98153490 Pipe: Propagate debug flags from protocol to channels
Pipe channels are kind-of implicit, so setting protocol debug flags
should also set pipe debug flags.
2021-03-16 20:10:00 +01:00
Ondrej Zajicek (work)
7be3af7fa6 Rate-limit scheduling of work-events
In general, events are code handling some some condition, which is
scheduled when such condition happened and executed independently from
I/O loop. Work-events are a subgroup of events that are scheduled
repeatedly until some (often significant) work is done (e.g. feeding
routes to protocol). All scheduled events are executed during each
I/O loop iteration.

Separate work-events from regular events to a separate queue and
rate limit their execution to a fixed number per I/O loop iteration.
That should prevent excess latency when many work-events are
scheduled at one time (e.g. simultaneous reload of many BGP sessions).
2021-03-12 15:35:56 +01:00
Ondrej Zajicek (work)
211fe69c98 Nest: No automatic ROA reload on non-reloadable channels 2021-03-09 18:37:52 +01:00
Ondrej Zajicek (work)
d3782c72b9 Nest: Add option to control automatic RPKI reload
Also, no automatic reload for BGP channels without import/export table.
2021-02-12 05:05:18 +01:00
Ondrej Zajicek (work)
00b85905b9 Nest: Automatic channel reloads based on RPKI changes
If there are roa_check() calls in channel filters, then the channel
subscribes to ROA table notifications, which are sent when ROA tables
are updated (subject to settle time) and trigger channel reload or
refeed.
2021-02-10 03:09:57 +01:00
Ondrej Zajicek (work)
d06a875b04 Filter: Recursive filter iteration code
Add macros for recursive filter iteration that allows to examine
all instructions reachable from a filter.
2021-02-07 19:21:42 +01:00
Ondrej Zajicek (work)
7a1f4baac1 Nest: remove last_tx_filter_change
No longer needed after redesign of export handling.
2021-01-06 14:51:49 +01:00
Ondrej Zajicek (work)
61dae32b29 Nest: Per-channel debug flags
The patch add support for per-channel debug flags, currently just
'states', 'routes', and 'filters'. Flag 'states' is used for channel
state changes, remaining two for routes passed through the channel.
The per-protocol debug flags 'routes'/'filters' still enable reporting
of routes for all channels, to keep existing behavior.

The patch causes minor changes in some log messages.
2020-12-07 22:19:40 +01:00
Ondrej Zajicek (work)
1678bc0746 Fix some failed asserts due to add_tail()
When config structures are copied due to template application,
we need to reset list node structure before calling add_tail().

Thanks to Mikael Magnusson for patches.
2020-11-24 03:42:23 +01:00
Ondrej Zajicek (work)
c26c6bc2d7 Show info from multiple protocols when protocol is not specified
Most commands like 'show ospf neighbors' fail when protocol is not
specified and there are multiple instances of given protocol type.
This is annoying in BIRD 2, as many protocols have IPv4 and IPv6
instances. The patch changes that by showing output from all protocol
instances of appropriate type.

Note that the patch also removes terminating cli_msg() call from these
commands and moves it to the common iterating code.
2020-06-28 15:38:47 +02:00
Maria Matejka
fd9f0c0640 Configuration strings are constant.
This is merely a const propagation. There was no problem in there.
2020-04-09 15:37:14 +02:00
Ondrej Zajicek (work)
4ab54f1aef Nest: Fix bitmap cleanup
Channel currently does not have independent pool and uses protocol pool,
which is freed when protocol changes state to down, while channel is
still in flushing. Move some some cleanup code to channel_do_flush()
so it is done before freeing of protocol pool.
2019-12-10 18:18:02 +01:00
Ondrej Zajicek (work)
5ea39eaa96 Nest: Use bitmaps to keep track of exported routes
Use a hierarchical bitmap in a routing table to assign ids to routes, and
then use bitmaps (indexed by route id) in channels to keep track whether
routes were exported. This avoids unreliable and inefficient re-evaluation
of filters for old routes in order to determine whether they were exported.
2019-11-26 18:39:25 +01:00
Ondrej Zajicek (work)
a297a4f044 Nest: Fix crash in route reload when some channels are not up.
Only channels that are up can be reloaded.
2019-08-14 06:02:33 +02:00
Ondrej Zajicek (work)
b7d7599ce3 BGP: implement Adj-RIB-Out
The patch implements optional internal export table to a channel and
hooks it to BGP so it can be used as Adj-RIB-Out. When enabled, all
exported (post-filtered) routes are stored there. An export table can be
examined using e.g. 'show route export table bgp1.ipv4'.
2019-08-14 06:02:33 +02:00
Ondrej Zajicek (work)
e2b530aa72 BGP: Improve reconfiguration
Several BGP channel options (including 'next hop self') could be
reconfigured without session reset, with just route refeed/refresh.
The patch improves reconfiguration code to do it that way.
2019-08-06 15:29:06 +02:00
Ondrej Zajicek (work)
cec40a7467 Merge remote-tracking branch 'origin/mq-filter-stack' 2019-07-24 15:38:32 +02:00
Ondrej Zajicek (work)
18f70a6229 Nest: VRF of protocol can be explicitly specified as 'default'
Protocol can have specified VRF, in such case it is restricted to a set
of ifaces associated with the VRF, otherwise it can use all interfaces.

The patch allows to specify VRF as 'default', in which case it is
restricted to a set of iface not associated with any VRF.
2019-07-24 15:08:03 +02:00
Maria Matejka
eac9250fd5 Merge branch 'master' into mq-filter-stack 2019-07-03 11:12:25 +02:00
Ondrej Zajicek (work)
8a68316eb9 Nest: Add command to request graceful restart
When 'graceful down' command is entered, protocols are shut down
with regard to graceful restart. Namely Kernel protocol does
not remove routes and BGP protocol does not send notification,
just closes the connection.
2019-06-30 21:29:24 +02:00
Ondrej Zajicek (work)
e0835db4f1 BGP: Dynamic BGP
Support for dynamically spawning BGP protocols for incoming connections.
Use 'neighbor range' to specify range of valid neighbor addresses, then
incoming connections from these addresses spawn new BGP instances.
2019-04-30 13:32:39 +02:00
Maria Matejka
0b39b1cbb7 Conf: Symbol implementation converted from void pointers to union
... and consted some declarations.
2019-02-20 22:30:55 +01:00
Ondrej Zajicek (work)
52fdd1cb76 Nest: Report preferred counters also when 'import keep filtered' is enabled
Thanks to Michal Nowak for reporting the issue.
2019-02-05 15:59:26 +01:00
Ondrej Zajicek (work)
e1c275d87b Nest: Reestablish preferred counters 2019-02-02 13:28:16 +01:00
Maria Matějka
82b742533b Perf: Protocol to measure BIRD performance internally
This protocol is highly experimental and nobody should use it in
production. Anyway it may help you getting some insight into what eats
so much time in filter processing.
2018-12-18 15:08:31 +01:00
Ondrej Zajicek (work)
cfa6ff9569 Nest: fix bug in previous patches related to channel reconfiguration
The patch d506263d... blocked adding channel during reconfiguration,
that broke protocols which use the same functiona also during init.
This patch fixes that.
2018-12-16 22:48:13 +01:00
Ondrej Zajicek (work)
682d3f7de0 BGP: implement Adj-RIB-In
The patch implements optional internal import table to a channel and
hooks it to BGP so it can be used as Adj-RIB-In. When enabled, all
received (pre-filtered) routes are stored there and import filters can
be re-evaluated without explicit route refresh. An import table can be
examined using e.g. 'show route import table bgp1.ipv4'.
2018-12-12 14:46:24 +01:00
Ondrej Zajicek (work)
d506263da7 Nest: Forbid adding channels during reconfiguration
When a new channel is found during reconfiguration, do force restart
of the protocol, like with any other un-reconfigurable change.

The old behavior was that the new channel was added but remained in down
state, even if the protocol was up, so a manual protocol restart was
often necessary.

In the future this should be improved such that a reconfigurable
channel addition (e.g. direct) is accepted and channel is started,
while an un-reconfigurable addition forces protocol restart.
2018-12-11 17:57:14 +01:00
Ondrej Zajicek (work)
863ecfc785 The MRT protocol
The new MRT protocol is responsible for periodic RIB table dumps in the
MRT format (RFC 6396). Also the existing code for BGP4MP MRT dumps is
refactored and splitted between BGP to MRT protocols, will be more
integrated into MRT in the future.

Example:

protocol mrt {
        table "*";
        filename "%N_%F_%T.mrt";
        period 60;
}

It is partially based on the old MRT code from Pavel Tvrdik.
2018-11-20 17:45:35 +01:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Ondrej Zajicek (work)
a81e18da25 Nest: Fix race condition during reconfiguration
If export filter is changed during reconfiguration and a route disappears
between reconfiguration and refeed (e.g., if the route is a static route
also removed during the reconfiguration), the route is not withdrawn.
The patch fixes that by adding tx reconfiguration timestamp.
2018-07-03 18:00:52 +02:00
Jan Maria Matejka
ee7e2ffd26 Protocol: Introducing an enum protocol_class
This supersedes the EAP_* constants.
2018-05-29 12:35:06 +02:00
Ondrej Zajicek (work)
2e507a7457 Use non-fatal asserts even for regular build 2018-01-10 16:17:37 +01:00
Ondrej Zajicek (work)
72163bd5f3 Nest: Allow modification of channels inherited from templates
Multiple definitions of same channels are forbidden, but inherited
channel can be redefined. In such case channel options are merged.
2018-01-09 18:42:22 +01:00
Ondrej Zajicek (work)
94f9be80c3 Nest: Fix filter reconfiguration
Function filter_same() must be called with arguments in proper order,
otherwise it breaks the new filter, causing crash during route
processing.
2018-01-09 14:36:11 +01:00
Ondrej Zajicek (work)
eb95b5ec1a Nest: Minor formatting changes 2017-12-08 15:16:47 +01:00
Ondrej Zajicek (work)
830ba75e6d Merge commit '1e8721e2aeccfbc3f533e8b8abc07582cee77e9a' into int-new 2017-12-07 21:54:47 +01:00
Ondrej Zajicek (work)
46434a3cad Merge commit '7b2c5f3d2826e3175bf31b1c36056c9efc587a2b' into int-new 2017-12-07 18:35:46 +01:00
Ondrej Zajicek (work)
a6f79ca57f Timers: Revert temporary names and remove old timer.h 2017-12-07 13:54:59 +01:00
Ondrej Zajicek (work)
574b232427 Timers: Fix TBF and some last remains 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
3e405fb188 Nest: Update to new timers 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
d3fa9e84e9 Timers: Show sub-second times in some protocol outputs 2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
f047271cb9 Timers: Parse and format functions for microsecond times
Date/time output (e.g. in logs, show commands) can use %f to specify
subsecond time. By default, millisecond precision is used in output.
2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
025525266f Timers: Replace old timers with microsecond timers
The old timer interface is still kept, but implemented by new timers. The
plan is to switch from the old inteface to the new interface, then clean
it up.
2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
cd1d99611e BGP: Shutdown communication (RFC 8203)
The patch implements BGP Administrative Shutdown Communication (RFC 8203)
allowing BGP operators to pass messages related to BGP session
administrative shutdown/restart. It handles both transmit and receive of
shutdown messages. Messages are logged and may be displayed by show
protocol all command.

Thanks to Job Snijders for the basic patch.
2017-09-19 19:57:52 +02:00
Ondrej Zajicek (work)
943478b00f Basic VRF support
Add basic VRF (virtual routing and forwarding) support. Protocols can be
associated with VRFs, such protocols will be restricted to interfaces
assigned to the VRF (as reported by Linux kernel) and will use sockets
bound to the VRF. E.g., different multihop BGP instances can use diffent
kernel routing tables to handle BGP TCP connections.

The VRF support is preliminary, currently there are several limitations:

- Recent Linux kernels (4.11) do not handle correctly sockets bound
to interaces that are part of VRF, so most protocols other than multihop
BGP do not work. This will be fixed by future kernel versions.

- Neighbor cache ignores VRFs. Breaks config with the same prefix on
local interfaces in different VRFs. Not much problem as single hop
protocols do not work anyways.

- Olock code ignores VRFs. Breaks config with multiple BGP peers with the
same IP address in different VRFs.

- Incoming BGP connections are not dispatched according to VRFs.
Breaks config with multiple BGP peers with the same IP address in
different VRFs. Perhaps we would need some kernel API to read VRF of
incoming connection? Or probably use multiple listening sockets in
int-new branch.

- We should handle master VRF interface up/down events and perhaps
disable associated protocols when VRF goes down. Or at least disable
associated interfaces.

- Also we should check if the master iface is really VRF iface and
not some other kind of master iface.

- BFD session request dispatch should be aware of VRFs.

- Perhaps kernel protocol should read default kernel table ID from VRF
iface so it is not necessary to configure it.

- Perhaps we should have per-VRF default table.
2017-09-06 17:38:48 +02:00
Ondrej Zajicek (work)
734e9fb8a9 Minor cleanups and fixes 2017-05-23 13:12:25 +02:00
Ondrej Zajicek (work)
b29499996b Nest: Update of show route cmd
Some code cleanup, multiple bugfixes, allows to specify also channel
for 'show route export'. Interesting how such apparenty simple thing
like show route cmd has plenty of ugly corner cases.
2017-04-25 19:02:31 +02:00