Commit graph

3922 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
3343088a71 RIP: Fix crash when interface is removed
Recent changes in neighbor code caused RIP to access neighbor field which
is NULL during interface/neighbor removal and caused crash when debug
messages are enabled. Use correct field to get iface from neighbor.
2020-02-14 22:43:27 +01:00
Maria Matejka
ab089f4fb5 Conf: Better error message when reading iproute2 config
Reported by: Martin Weinelt <martin@darmstadt.freifunk.net>
2020-02-04 10:34:46 +01:00
Maria Matejka
027a3e66f7 RPKI: Allow build without libSSH 2020-02-04 10:15:35 +01:00
Maria Matejka
4bbc10614f Added missing extern
Thanks to Robert Scheck <bird@robert-scheck.de> who reported it
and Toke Høiland-Jørgensen <toke@toke.dk> who suggested this patch.
2020-02-04 10:11:16 +01:00
Ondrej Zajicek (work)
7f9adafc10 BFD: Option to specify which class of BFD sessions are accepted
Allows to configure IPv4/IPv6-only or direct/multihop-only BFD protocol
instances.
2020-01-28 18:07:25 +01:00
Ondrej Zajicek (work)
9f2670277c OSPF: Fix bad initialization of tx_hdrlen field
Function ifa_tx_hdrlen() uses fields autype and passwords, so it must be
called after these are set.

Thanks to Kenth Eriksson for the bugreport.
2020-01-09 03:02:15 +01:00
Ondrej Zajicek (work)
7d767c5a3d KRT: Improve syncer code to avoid using temporary data in rtable
The old code stored route verdicts and temporary routes directly in
rtable. The new code do not store received routes (it immediately
compares them with exported routes and resolves conflicts) and uses
internal bitmap to keep track of which routes were received and which
needs to be reinstalled.

By not putting 'invalid' temporary routes to rtable, we keep rtable
in consistent state, therefore scan no longer needs to be atomic
operation and could be splitted to multiple events.
2020-01-07 18:35:03 +01:00
Ondrej Zajicek (work)
ef8c45749c Filter: Fix typecheck for AND/OR.
Do not apply dynamic type check for second argument of AND/OR, as it is
not evaluated immediately like regular argument would be.

Thanks to Mikael for the bugreport.
2020-01-07 01:24:30 +01:00
Ondrej Zajicek (work)
cc75b3e1dc KRT: Remove KRF_SYNC_ERROR flag
This info is now stored in an internal bmap. Unfortunately, net.flags
is still needed for temporary kernel data.
2019-12-19 16:34:35 +01:00
Ondrej Zajicek (work)
90a9c97e38 KRT: Fix removal of KRF_INSTALLED
Use route id from net->routes to check export_map. Route received from
sysdep KRT code does not have proper id.
2019-12-17 16:30:29 +01:00
Ondrej Zajicek (work)
3dabf7b8d0 Test: Improve filter_test
Initial parsing of test.conf must be done directly in filter_test main,
while reconfiguration is handled as a regular test. Also fix several
minor issues in test code.
2019-12-17 00:01:53 +01:00
Ondrej Zajicek (work)
3232d17186 Doc: Fix documentation of BGP gateway option
Thanks to Nico Schottelius for the bugreport.
2019-12-16 18:08:40 +01:00
Ondrej Zajicek (work)
c132acae36 KRT: Remove KRF_INSTALLED flag
The same information is stored in export_map of kernel protocol.
2019-12-16 02:42:24 +01:00
Maria Matejka
d3aa4f2aed Filter: fix filter comparison test 2019-12-12 15:42:46 +01:00
Ondrej Zajicek (work)
dfb3eb7716 Filter: Fix function comparison
Check the SYM_FLAG_SAME in new symbols. The old code checked that
in old symbols (f2).
2019-12-10 18:53:16 +01:00
Ondrej Zajicek (work)
4ab54f1aef Nest: Fix bitmap cleanup
Channel currently does not have independent pool and uses protocol pool,
which is freed when protocol changes state to down, while channel is
still in flushing. Move some some cleanup code to channel_do_flush()
so it is done before freeing of protocol pool.
2019-12-10 18:18:02 +01:00
Ondrej Zajicek (work)
ff2ca10cba Filter: Add support for src/dst accessors for Flowspec and SADR 2019-12-09 04:23:01 +01:00
Ondrej Zajicek (work)
21d09632a5 BGP: Add some statistics
Add some statistic counters to BGP consistent with BGP MIB (RFC 4273),
including persistent 'FSM established transitions'.
2019-12-03 18:05:41 +01:00
Matous Holinka
92249894b3 CI: Add more build tests
Add more Docker images with distributions (CentOS 8, Debian 10,
Fedora 27-31, OpenSUSE 15.0 & 15.1, and Ubuntu 18.04 & 19.04).
Fix some issues with older ones.
2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
0adfa0ec07 CI: Cleanup of job templates
Env templates were used for separate IPv4/IPv6 build, that is no longer
needed.
2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
6a314d26cb CI: Update new netlab location 2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
148bd9ee92 CI: Minor update 2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
faa43a755e Apply relevant changes from branch mh-test-gitlab 2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
5176455f1a Gitlab test 2019-11-26 19:43:56 +01:00
Ondrej Zajicek (work)
5ea39eaa96 Nest: Use bitmaps to keep track of exported routes
Use a hierarchical bitmap in a routing table to assign ids to routes, and
then use bitmaps (indexed by route id) in channels to keep track whether
routes were exported. This avoids unreliable and inefficient re-evaluation
of filters for old routes in order to determine whether they were exported.
2019-11-26 18:39:25 +01:00
Ondrej Zajicek (work)
af02b83b88 Lib: Basic and hierarchical bitmaps
Basic bitmap is obvious. Hierarchical bitmap is structure of several
bitmaps, where higher levels are conjunctions of intervals on level
below, allowing for efficient lookup of first unset bit.
2019-11-26 18:39:02 +01:00
Ondrej Zajicek (work)
d033e6327d CLI: Fix continuation lines after final one
Continuation lines may use short form (with space instead of message
number), but this should not be done when previous line is final.

Thanks to Kenth Eriksson for the bugreport and analysis.
2019-11-26 16:43:09 +01:00
Ondrej Zajicek (work)
0f88200247 BGP: Fix processing of IPv6 Flowspec
During NLRI parsing of IPv6 Flowspec, dst prefix was not properly
extracted from NLRI, therefore a received flow was stored in a different
position in flowspec routing table, and was not reachable by command
'show route <flow>'.

Add proper prefix part accessors to flowspec code and use them from BGP
NLRI parsing code.

Thanks to Alex D. for the bugreport.
2019-11-18 17:56:51 +01:00
Ondrej Zajicek
53401bef63 Netlink: Handle IPv4 routes with IPv6 nexthops
Accept RTA_VIA attribute in all cases. The old code always used
RTA_GATEWAY for IPv4 / IPv6 and RTA_VIA for MPLS. The new code uses
RTA_VIA in cases where AF of network and AF of nexthop differs.
2019-11-12 18:13:21 +01:00
Ondrej Zajicek (work)
0b228fca04 BGP: Add option to enforce first AS in AS_PATH
This is optional check described in RFC 4271. Although this can be also
done by filters, it is widely implemented option in BGP implementations.

Thanks to Eugene Bogomazov for the original patch.
2019-11-10 02:06:07 +01:00
Ondrej Zajicek (work)
becda5638a Doc: Minor fix 2019-11-05 16:29:47 +01:00
Ondrej Zajicek (work)
d54a69ac7f Doc: Add documentation for BGP option 'allow as sets' 2019-11-05 16:00:25 +01:00
Ondrej Zajicek (work)
10c4cd9677 Filter: Add type info for more instructions 2019-11-05 15:30:20 +01:00
Ondrej Zajicek (work)
87512e9751 Filter: Improve typecheck error messages 2019-11-05 15:30:16 +01:00
Ondrej Zajicek (work)
c00c20a799 Filter: Better constant promotion
We use constant promotion from IPv4 to Router-ID values, as they have
same literals. Instead of ad-hoc code in filter instructions, add
constant promotion code to parse-time typecheck code.
2019-11-05 15:28:47 +01:00
Ondrej Zajicek (work)
26194bd684 Filter: Improved parse-time typechecks 2019-11-05 15:28:47 +01:00
Ondrej Zajicek
6fbcd8914a Filter: Parse-time typechecks
Most expressions can be type-validated in parse time. It is not
strong enough to eliminate runtime checks, but at least one gets
errors immediately during reconfigure.
2019-11-05 15:28:47 +01:00
Ondrej Zajicek (work)
a52476c9be BGP: Add option to reject AS_SETs
There is a pending draft to make them obsolete
2019-11-04 22:09:35 +01:00
Ondrej Zajicek (work)
0edf0c8cd9 Support for address family constants
We already had them defined on BGP level, but they are more general.
2019-11-03 22:25:44 +01:00
Ondrej Zajicek (work)
08c4c9a30b Nest: Fix bug in export table
For regular channels do not compare src in export table, as we want to
keep here only the best (exported) route per network.
2019-11-03 20:25:42 +01:00
Ondrej Zajicek (work)
be7c1aef42 BGP: RFC 8654 got released 2019-10-26 01:32:24 +02:00
Ondrej Zajicek (work)
498d8145c0 Nest: Fix primary flag in show route
The route is changed by rte_make_tmp_attrs(), so we need to compare
net->routes to the original one.

Thanks to Kenth Eriksson for the bugreport.
2019-10-25 13:28:51 +02:00
Ondrej Zajicek (work)
ec331acf48 BGP: Fix handling of transitive extended communities
Transitive extended communities should be removed on external sessions,
the old code them in all cases.

Thanks to Jean-Daniel Pauget for the original patch.
2019-10-24 17:50:19 +02:00
Ondrej Zajicek
5ce881be82 Accept uppercase letters in iproute2 names
Names read from texfiles in /etc/iproute2/* are normalized by replacing
non-alphanumeric chars with underscore. The patch fixes handling of
uppercase letters, which were handled as non-alphanumberic.

Thanks to Igor Gavrilov for the bugreport.
2019-10-22 16:25:38 +02:00
Fabrice Fontaine
f9eb9b4cab Nest: Fix build without protocols
(CHECK keyword added by commiter)
2019-10-19 12:50:27 +02:00
Ondrej Zajicek (work)
4e23b49969 RPKI: Fix handling of IPv6 cache addresses
The old code used just sizeof(struct sockaddr) bytes of IP address.
2019-10-19 03:39:07 +02:00
Ondrej Zajicek (work)
b000a94275 NEWS and version update 2019-10-11 00:18:38 +02:00
Ondrej Zajicek (work)
6c9cda6f92 BGP: Fix reconfiguration with import table
Change of some options requires route refresh, but when import table is
active, channel reload is done from it instead of doing full route
refresh. So in this case we request it internally.
2019-10-10 23:33:40 +02:00
Ondrej Zajicek (work)
eeb2c61653 Doc: Minor documentation fixes
Thanks to Christoph for the bugreport.
2019-10-10 22:43:41 +02:00
Ondrej Zajicek (work)
843b10c8b0 Nest: Handle non-MPLS on MPLS case in recursive route update
When non-MPLS recursive route resolves to MPLS underlying route,
then it should get MPLS labels from the the underlying route.
2019-10-10 15:25:36 +02:00