Commit graph

1417 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
2872ab927e OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.

(recommiting, was reset by the previous commit)
2019-07-09 03:48:02 +02:00
Ondrej Zajicek (work)
85840d4c03 OSPF: Fix handling of external routes on graceful restart
We need to flush learned external LSAs a bit later than other LSAs (after
first feed after end of the graceful restart) to avoid flap of external
routes.
2019-07-09 03:39:19 +02:00
Ondrej Zajicek (work)
fa1e0ba354 OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.
2019-07-04 13:34:42 +02:00
Maria Jan Matejka
026bfedb33 BGP: Prefix hash is too small, increase its max size.
This doesn't make any change for you until you have
millions of updates waiting to be sent. Increasing
the max hash size from 2^20 to 2^24.
2019-07-01 09:05:54 +02:00
Maria Jan Matejka
9dac814ee8 BGP: split tx explicitly
If BGP has too many data to send and BIRD is slower than the link, TX is
always possible until all data is sent. This patch limits maximum number
of generated BGP messages in one iteration of TX hook.
2019-07-01 09:05:50 +02:00
Ondrej Zajicek (work)
1a2ad348f6 OSPF: Support for graceful restart
Implement OSPFv2 (RFC 3623) and OSPFv3 (RFC 5187) graceful restart,
for both restarting and helper sides. Graceful restart is initiated
by 'graceful down' command.
2019-06-30 21:30:41 +02:00
Ondrej Zajicek (work)
8a68316eb9 Nest: Add command to request graceful restart
When 'graceful down' command is entered, protocols are shut down
with regard to graceful restart. Namely Kernel protocol does
not remove routes and BGP protocol does not send notification,
just closes the connection.
2019-06-30 21:29:24 +02:00
Ondrej Zajicek (work)
d35fb9d732 BGP: Fix bug introduced in one of last patches 2019-06-12 16:37:12 +02:00
Alexander Azimov
7ff34ca2cb BGP: Compliance with RFC8203bis 2019-04-30 13:55:43 +02:00
Ondrej Zajicek (work)
0b1e1e1a00 BGP: Output Local AS number in show protocol
Useful for implementation of agents implementing the SNMP-BGP MIB, which
requires the local AS of a session to be specified.

Thanks to Jan-Philipp Litza for the patch.
2019-04-30 13:44:11 +02:00
Ondrej Zajicek (work)
e0835db4f1 BGP: Dynamic BGP
Support for dynamically spawning BGP protocols for incoming connections.
Use 'neighbor range' to specify range of valid neighbor addresses, then
incoming connections from these addresses spawn new BGP instances.
2019-04-30 13:32:39 +02:00
Ondrej Zajicek (work)
6ff8119765 OSPFv3: Fix some overlooked cases in IPv4 mode
Prefixes with max length (/32) were not handled properly.

Thanks to bauen1 for the bugreport.
2019-04-12 14:11:23 +02:00
Ondrej Zajicek (work)
4a50c8bd03 BGP: Handle corner cases in event ordering
When BGP connection is opened, it may happen that rx hook (with remote
OPEN) is called before tx hook (for local OPEN). Therefore, we need to do
internal changes (like setting local_caps) synchronously with OPENSENT
transition and we need to ensure that OPEN is sent before KEEPALIVE.
2019-04-08 16:56:56 +02:00
Ondrej Zajicek (work)
23ee6b1cd6 BGP: Promiscuous ASN mode
Allow to specify just 'internal' or 'external' for remote neighbor
instead of specific ASN. In the second case that means BGP peers with
any non-local ASNs are accepted.
2019-04-03 15:54:50 +02:00
Ondrej Zajicek (work)
a22c3e5968 BGP: Separate runtime and config usage of local/remote ip and as fields 2019-04-02 17:22:31 +02:00
Ondrej Zajicek (work)
3c3605818f BGP: Mandatory option for channels
Allow to mark channel to be mandatory, and do not allow BGP sessions if
no common AFI/SAFI is established.
2019-03-19 17:44:50 +01:00
Ondrej Zajicek (work)
7e5f769d91 BGP: Handle case where capabilites are not used
If peer does not announce capabilities at all, or when we have
capabilities disabled, handle that as implicit IPv4 unicast.
2019-03-18 14:29:12 +01:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Ondrej Zajicek (work)
9aa77fcceb OSPF: Improved handling of tmpattrs
Keep track of whether OSPF tmpattrs are actually defined for given route
(using flags in rte->pflags). That makes them behave more like real
eattrs so a protocol can define just a subset of them or they can be
undefined by filters.

Do not set ospf_metric2 for other than type 2 external OSPF routes and do
not set ospf_tag for non-external OSPF routes. That also fixes a bug
where internal/inter-area route propagated from one OSPF instance to
another is initiated with infinity ospf_metric2.

Thanks to Yaroslav Dronskii for the bugreport.
2019-03-06 18:28:00 +01:00
Ondrej Zajicek (work)
bf8d7bba9e OSPF: Reset LSAs during area type change
When area is reconfigured to a different type, we need to flush LSAs as
they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we
have have just one OSPF area and that changes type, we could restart OSPF
as there is no state to keep anyway. That solves issue with different
handling of external routes exported to OSPF based of main area type.
2019-02-17 01:54:01 +01:00
Ondrej Zajicek (work)
4a3f5b3617 OSPF: Basic support for DN-bit handling (RFC 4576)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are
marked by DN flag and they are ignored by other OSPF routers with VPN-PE
enabled.
2019-02-13 15:53:36 +01:00
Ondrej Zajicek (work)
1e958e52d3 OSPF: Do not originate Router-Information LSA
As we do not have much usage for it yet.
2019-02-09 16:15:01 +01:00
Ondrej Zajicek (work)
cd16538fc9 Merge remote-tracking branch 'origin/mq-opt' 2019-02-09 15:53:16 +01:00
Ondrej Zajicek (work)
a9b97cbcb7 OSPF: Send direct acknowledgements as unicast
Direct acknowledgements should be send as unicast to a corresponding
neighbor. Only delayed acks should be send as multicast to all/designated
routers.
2019-02-03 20:22:40 +01:00
Ondrej Zajicek (work)
16605f2fda OSPF: Reject duplicate DBDES packets after dead interval
Master may free last DBDES packet immediately. Slave must wait dead
interval before freeing last DBDES packet and then reject duplicate
DBDES packets with SeqNumberMismatch.
2019-02-03 17:31:27 +01:00
Ondrej Zajicek (work)
9c94583a3d OSPF: DD seqnum should be initialized only for first attempts
After SeqNumberMismatch/BadLSReq, we should continue with the old
seqnum++. The old code tries to do that by n->adj, but it was set
nowhere.
2019-02-03 16:20:37 +01:00
Ondrej Zajicek (work)
267da8138d OSPF: Reject DBDES packets with non-matching MTU
As it is specified in RFC 2328. The old code just provided warning.
2019-02-03 15:45:43 +01:00
Maria Matejka
f9b97f1c62 Perf: Added forgotten all-protocol options 2019-02-01 14:09:01 +01:00
Maria Matejka
e85e37d91d Perf: Prune the table after every loop to have clean state. 2019-01-31 15:05:40 +01:00
Maria Matejka
7411b694c3 Perf: Write also BIRD version to have all the needed data in the logfile 2019-01-31 15:03:43 +01:00
Ondrej Zajicek (work)
1c730ee761 Doc: Remove doc for already removed option 2019-01-26 20:44:37 +01:00
Ondrej Zajicek (work)
b8a3608aa5 BGP: Cleanup channels when going down
When going up, uncleaned old channel state may trigger unexpected
conditions crashing bird.
2019-01-26 19:48:16 +01:00
Ondrej Zajicek (work)
5a50a98980 OSPF: Opaque LSAs and Router Information LSA
Add support for OSPFv2 Opaque LSAs (RFC 5250) and for Router Information
LSA (RFC 7770). The second part is here mainly for testing opaque LSAs.
2019-01-24 22:45:27 +01:00
Ondrej Zajicek (work)
470740f97b BGP: Better dispatch of incoming connections
Since v2 we have multiple listening BGP sockets, and each BGP protocol
has associated one of them. Use listening socket that accepted the
incoming connection as a key in the dispatch process so only BGP
protocols assocaited with that listening socket can be selected.
This is necesary for proper dispatch when VRFs are used.
2019-01-02 16:01:21 +01:00
Ondrej Zajicek (work)
e16b0aef31 BGP: Postpone setting link_addr
It may happen that the LLv6 address for given iface is not defined during
BGP start, so we postpone the check to the the session establishment.
2019-01-02 15:57:14 +01:00
Maria Matějka
82b742533b Perf: Protocol to measure BIRD performance internally
This protocol is highly experimental and nobody should use it in
production. Anyway it may help you getting some insight into what eats
so much time in filter processing.
2018-12-18 15:08:31 +01:00
Ondrej Zajicek (work)
cea2e25f41 OSPF: Fix wrong LSA collisions detection
In some circumstances (old LSA flushed but not acknowledged and not
removed) origination of a new LSA may wrongly triggers LSA collision
code. The patch fixes that.

Thanks to Asbjorn Mikkelsen for the bugreport and @mdelagueronniere
for the original patch.
2018-12-17 17:01:08 +01:00
Ondrej Zajicek (work)
1cab2b4a7c BGP: Extend 'next hop keep' and 'next hop self' options
Extend 'next hop keep' and 'next hop self' options to have boolean values
(enabled / disabled) and also values 'ibgp'/ 'ebgp' to restrict it to
routes received from IBGP / EBGP. This allows to have it enabled by
default in some cases, matches features of other implementations, and
allows to handle some strange cases like EBGP border router with 'next
hop self' also doing IBGP route reflecting.

Change default of 'next hop keep' to enabled for route servers, and
'ibgp' for route reflectors.

Update documentation for these options.
2018-12-16 23:44:24 +01:00
Ondrej Zajicek (work)
cb311b441a BGP: Better handling of non-matching AFI in nexthops 2018-12-16 15:43:58 +01:00
Ondrej Zajicek (work)
3a2a3c7325 Doc: Rename code documentation files back to Doc 2018-12-14 02:03:42 +01:00
Ondrej Zajicek (work)
532116e7e3 BGP: Do not prepend ASN in export from non-RS EBGP to RS EBGP
When route is exported to regular EBGP, local ASN should be prepended to
AS_PATH. When route is propagated by route server (between RS-marked
EBGP peers), it should not change AS_PATH. Question is what to do in
other cases (from non-RS EBGP, IBGP, or locally originated to RS EBGP).

In 1.6.x, we did not prepend ASN in non-RS EBGP or IBGP to RS EBGP, but
we prepended in local to RS EBGP.

In 2.0.x, we changed that so only RS-EBGP to RS-EBGP is not prepended.
We received some negative responses (thanks to heisenbug and Alexander
Zubkov), we decided to change it back. One reason is that it is simple
to modify the AS_PATH by filters, but not possible to un-modify
changes done by BGP itself. Also, as 1.6.x behavior was not really
consistent, the final behavior is that ASN is never prepended when
exported to RS EBGP, like to IBGP.

Note that i do not express an opinion about whether such configurations
are even reasonable.
2018-12-12 17:36:54 +01:00
Ondrej Zajicek (work)
0f40405fc9 Update RFC references
Progdoc comments do not allow SGML tags
2018-12-12 16:38:30 +01:00
Ondrej Zajicek (work)
682d3f7de0 BGP: implement Adj-RIB-In
The patch implements optional internal import table to a channel and
hooks it to BGP so it can be used as Adj-RIB-In. When enabled, all
received (pre-filtered) routes are stored there and import filters can
be re-evaluated without explicit route refresh. An import table can be
examined using e.g. 'show route import table bgp1.ipv4'.
2018-12-12 14:46:24 +01:00
Ondrej Zajicek (work)
d506263da7 Nest: Forbid adding channels during reconfiguration
When a new channel is found during reconfiguration, do force restart
of the protocol, like with any other un-reconfigurable change.

The old behavior was that the new channel was added but remained in down
state, even if the protocol was up, so a manual protocol restart was
often necessary.

In the future this should be improved such that a reconfigurable
channel addition (e.g. direct) is accepted and channel is started,
while an un-reconfigurable addition forces protocol restart.
2018-12-11 17:57:14 +01:00
Ondrej Zajicek (work)
baeacdcfd3 OSPF: Fix reconfiguration of vlinks
Fix crash during reconfiguration of OSPF config with vlinks. When vlink
is reconfigured, a generic iface-reconfiguration code is used, which in
one place supposes that it is running on a regular iface.

Thanks to Cybertinus for a bugreport.
2018-12-10 02:15:06 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
e2ae08694e Nest: Do not hard-reset interface when preferred address is changed
Modify protocols to use preferred address change notification instead on
depending on hard-reset of interfaces in that case, and remove hard-reset
in that case. This avoids issue when e.g. IPv6 protocol restarts
interface when IPv4 preferred address changed (as hard-reset is
unavoidable and common for whole iface).

The patch also fixes a bug when removing last address does not send
preferred address change notification.
2018-11-28 16:55:32 +01:00
Ondrej Zajicek (work)
863ecfc785 The MRT protocol
The new MRT protocol is responsible for periodic RIB table dumps in the
MRT format (RFC 6396). Also the existing code for BGP4MP MRT dumps is
refactored and splitted between BGP to MRT protocols, will be more
integrated into MRT in the future.

Example:

protocol mrt {
        table "*";
        filename "%N_%F_%T.mrt";
        period 60;
}

It is partially based on the old MRT code from Pavel Tvrdik.
2018-11-20 17:45:35 +01:00
Ondrej Zajicek (work)
e19d08055a BGP: Fix VRF for listening socket
Listening socket should be bound to specified interface and VRF.

Thanks to Alexander Zubkov for the bugreport.
2018-10-26 19:11:33 +02:00
Ondrej Zajicek (work)
0ac9cb2c1f OSPF: Fix some trace messages
Missing argument in MTU change trace message can crash bird when MTU
change happens and trace messages are active.

Thanks to Alexander Velkov for the bugreport.
2018-10-25 17:22:37 +02:00