Commit graph

37 commits

Author SHA1 Message Date
Martin Mares
9a220cabbc #ifdef out lots of debugging information.
The long resource/routing table dump printed upon startup is gone now
and if you wish to see it, just send bird SIGUSR1 or use the `debug'
commands.
2000-05-04 20:52:28 +00:00
Martin Mares
93a786cb03 Removed a lot of unused variables.
Please try compiling your code with --enable-warnings to see them. (The
unused parameter warnings are usually bogus, the unused variable ones
are very useful, but gcc is unable to control them separately.)
2000-05-04 20:30:36 +00:00
Martin Mares
85a291ff30 IPv6 address classification fixes. 2000-05-02 15:21:51 +00:00
Martin Mares
287111fed1 Fix stupid bug in neighbor cache. 2000-04-10 10:40:00 +00:00
Martin Mares
6b9fa32080 Great cleanup of debug messages. LOCAL_DEBUG turned off in most modules,
several debug() calls converted to DBG().
2000-03-12 21:01:38 +00:00
Martin Mares
6a9f28b0b9 Added tracing of interface events. 2000-03-12 20:50:35 +00:00
Martin Mares
85053fce04 Reimplemented neighbor cache. Now uses real hashing. 2000-03-01 14:51:47 +00:00
Martin Mares
6a636392d3 Rewrote interface type detection logic. The `unnumbered' flag is now per
address, not per interface (hence it's ifa->flags & IA_UNNUMBERED) and
should be set reliably. IF_MULTIACCESS should be fixed now, but it isn't
wise to rely on it on interfaces configured with /30 prefix.
2000-02-29 23:19:52 +00:00
Martin Mares
f5ad9f87a3 Killed a couple of bugs in the neighbor cache.
Manual disable/enable/restart/shutdown/reconfiguration of protocols
no longer hangs on loops in neighbor lists :)
2000-01-19 11:52:32 +00:00
Martin Mares
f14a4becbe Reworked proto lists -- each proto is now in two lists: the global one
(proto_list) and per-type one (original lists). A lot of things simplified.

Implemented `disable', `enable' and `restart' CLI commands.
2000-01-16 23:30:06 +00:00
Martin Mares
476e108425 Minor cleanups. 1999-12-16 13:51:43 +00:00
Martin Mares
5954dcfab7 Introduced new protocol-dependent integer field `aux' to struct neighbor. 1999-12-01 11:59:24 +00:00
Martin Mares
0d3e6bceee show interfaces' and show protocols' works. 1999-11-30 12:57:14 +00:00
Martin Mares
ae97b946e9 Added few basic commands: show status, show interfaces [summary],
show protocols (incomplete).
1999-11-25 15:35:30 +00:00
Martin Mares
dce267832a Basic support for IPv6. The system-dependent part doesn't work yet,
but the core routines are there and seem to be working.

   o  lib/ipv6.[ch] written
   o  Lexical analyser recognizes IPv6 addresses and when in IPv6
      mode, treats pure IPv4 addresses as router IDs.
   o  Router ID must be configured manually on IPv6 systems.
   o  Added SCOPE_ORGANIZATION for org-scoped IPv6 multicasts.
   o  Fixed few places where ipa_(hton|ntoh) was called as a function
      returning converted address.
1999-08-03 19:36:06 +00:00
Martin Mares
8edf2361f9 Cleaned up handling of interface patterns:
o  Parsing of interface patterns moved to generic code,
      introduced this_ipatt which works similarly to this_iface.
   o  Interface patterns now support selection by both interface
      names and primary IP addresses.
   o  Proto `direct' updated.
   o  RIP updated as well, it also seems the memory corruption
      bug there is gone.
1999-08-03 19:30:49 +00:00
Martin Mares
a2697f02ac Netlink support for secondary interface addresses. 1999-05-07 13:46:16 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
b5239f2238 Don't try to manipulate neighbor lists for copied interface structures.
This avoids few nasty references to free memory.
1999-03-26 21:33:36 +00:00
Martin Mares
e35ef181a4 o The if_change_too_big_p change was too high-spirited. Fixed.
o  Introduced if_find_by_index()
o  Recognizing two types of interface updates: full update (starting with
   if_start_update(), ending with if_end_update(), guaranteed to see
   all existing interfaces) and a partial update (only if_update(),
   usually due to asynchronous interface notifications).
1999-03-02 18:36:09 +00:00
Martin Mares
bcbd8cc3be Interface logic changes:
o  Introduced IF_LINK_UP flag corresponding to real link state.
o  Allowed addressless interfaces.
o  IF_UP is now automatically calculated and set iff the interface
   is administratively up, has link up and has an IP address assigned.
   It may be IF_IGNORED, though (as in case of the loopback).
o  Any changes which include up/down transition are considered small
   enough to not provoke artificial upping and downing of the interface.
o  When an interface disappears (i.e., it wasn't seen in the last scan),
   we announce this change only once.
o  IF_LOOPBACK implies IF_IGNORE.
1999-03-02 17:28:06 +00:00
Martin Mares
d1f7eab6b5 Parameter order for the proto->if_notify hook was different in the include
file and different in reality. Decided to use the same order as we do
for proto->rt_notify (i.e., first new value and second the old one).
1999-02-13 21:58:53 +00:00
Martin Mares
3fb4ca2ce2 Don't send any neighbor notifications to protocols being flushed. 1999-02-13 20:57:47 +00:00
Martin Mares
783f8b689a When protocols go down, prune the neighbor list. 1999-02-13 20:55:08 +00:00
Martin Mares
4e9498cbb1 config->router_id works again. 1999-02-13 18:42:00 +00:00
Martin Mares
64011f898c struct proto again contains instance name (a copy of proto->cf->name). 1999-02-11 22:45:54 +00:00
Martin Mares
31b3e1bbf5 Implemented new configuration/reconfiguration interface and defined protocol
state machines. Full explanation will follow soon.
1999-02-05 21:37:34 +00:00
Martin Mares
08c69a7720 die() -> bug() where appropriate. 1998-12-20 14:27:37 +00:00
Martin Mares
436965d25e Aesthetic fix for neighbor cache debug dump. 1998-12-06 23:11:18 +00:00
Martin Mares
ed45f2e126 Added functions for manipulating interface name pattern lists:
o  iface_patt_match(list, iface) -- match interface against list
   o  iface_patts_equal(a, b, c) -- compare whether two pattern lists are
      equal or not. c(x,y) is called for comparison of protocol-dependent
      data.
1998-11-29 22:01:03 +00:00
Martin Mares
7d83290780 Generate router_id automatically if possible (standard "smallest of local
regular interface addresses" rule).

Protocols should NOT rely on router_id existence -- when router ID is not
available, the router_id variable is set to zero and protocols requiring
valid router ID should just refuse to start, reporting such error to the log.
1998-10-19 18:13:36 +00:00
Martin Mares
47b793064c Solve chicken-and-egg problems with protocol startup. We now queue all inactive
protocols and don't send route/interface updates to them and when they come up,
we resend the whole route/interface tables privately.

Removed the "scan interface list after protocol start" work-around.
1998-10-17 11:05:18 +00:00
Martin Mares
962ba482fd Use '%I' instead of dirty address printing hacks. 1998-06-17 14:36:02 +00:00
Martin Mares
620a355a15 Now sending IF_CHANGE_CREATE when a new interface appears and IF_CHANGE_UP
only if it's really up.
1998-06-04 20:30:11 +00:00
Martin Mares
d9f330c5ff Protocol hooks. All of them may be NULL. 1998-06-03 08:40:10 +00:00
Martin Mares
4cc78c5082 - Rewrote whole interface logic. Removed support for multiple addresses per
interface since it makes much trouble everywhere. Instead, we understand
  secondary addresses as subinterfaces.

- In case interface addresses or basic flags change, we simply convert it
  to a down/up sequence.

- Implemented the universal neighbour cache. (Just forget what did previous
  includes say of neighbour caching, this one is brand new.)
1998-06-01 21:41:11 +00:00
Martin Mares
8a48ecb8b1 Implemented scanning of network interfaces. Mostly very ugly code due to
terrible kernel interface (SIOGIFCONF and friends).
1998-05-26 21:42:05 +00:00