Commit graph

36 commits

Author SHA1 Message Date
Ondrej Zajicek
be86240662 Temporary OSPFv3 development commit.
Finally, it is working.
2009-09-08 13:45:02 +02:00
Ondrej Zajicek
874b868544 Implements primary address selection base on 'primary' option. 2009-05-29 22:49:30 +02:00
Ondrej Zajicek
20e94fb85b A change in OSPF and RIP interface patterns.
Allows to add more interface patterns to one common 'options'
section like:

interface "eth3", "eth4" { options common to eth3 and eth4 };

Also removes undocumented and unnecessary ability to specify
more interface patterns with different 'options' sections:

interface "eth3" { options ... }, "eth4" { options ... };
2009-05-06 22:02:45 +02:00
Martin Mares
cf318e3cd3 Removed comments about workings of the old neighbor cache which are
(1) obsolete and (2) replaced by the progdoc.
2000-06-01 16:17:29 +00:00
Martin Mares
0f32f2a65a Modified the neighbor cache to remember local addresses as well.
neighbor->scope now contains proper address scope which is zero (SCOPE_HOST)
for local addresses, higher (SCOPE_LINK, ..., SCOPE_UNIVERSE) for remote ones.
2000-06-01 12:58:04 +00:00
Martin Mares
200accf396 if_connected() is again private.
Introduced neigh_connected_to() to serve the same purpose efficiently.
2000-03-27 12:16:37 +00:00
Pavel Machek
6480dd0880 I broke compilation. Sorry. 2000-03-26 21:31:57 +00:00
Pavel Machek
697711be2c if_connected is usefull outside of neighbour cache. 2000-03-26 18:00:45 +00:00
Martin Mares
85053fce04 Reimplemented neighbor cache. Now uses real hashing. 2000-03-01 14:51:47 +00:00
Martin Mares
6a636392d3 Rewrote interface type detection logic. The `unnumbered' flag is now per
address, not per interface (hence it's ifa->flags & IA_UNNUMBERED) and
should be set reliably. IF_MULTIACCESS should be fixed now, but it isn't
wise to rely on it on interfaces configured with /30 prefix.
2000-02-29 23:19:52 +00:00
Martin Mares
f5ad9f87a3 Killed a couple of bugs in the neighbor cache.
Manual disable/enable/restart/shutdown/reconfiguration of protocols
no longer hangs on loops in neighbor lists :)
2000-01-19 11:52:32 +00:00
Martin Mares
476e108425 Minor cleanups. 1999-12-16 13:51:43 +00:00
Martin Mares
5954dcfab7 Introduced new protocol-dependent integer field `aux' to struct neighbor. 1999-12-01 11:59:24 +00:00
Martin Mares
ae97b946e9 Added few basic commands: show status, show interfaces [summary],
show protocols (incomplete).
1999-11-25 15:35:30 +00:00
Martin Mares
8edf2361f9 Cleaned up handling of interface patterns:
o  Parsing of interface patterns moved to generic code,
      introduced this_ipatt which works similarly to this_iface.
   o  Interface patterns now support selection by both interface
      names and primary IP addresses.
   o  Proto `direct' updated.
   o  RIP updated as well, it also seems the memory corruption
      bug there is gone.
1999-08-03 19:30:49 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
e35ef181a4 o The if_change_too_big_p change was too high-spirited. Fixed.
o  Introduced if_find_by_index()
o  Recognizing two types of interface updates: full update (starting with
   if_start_update(), ending with if_end_update(), guaranteed to see
   all existing interfaces) and a partial update (only if_update(),
   usually due to asynchronous interface notifications).
1999-03-02 18:36:09 +00:00
Martin Mares
bcbd8cc3be Interface logic changes:
o  Introduced IF_LINK_UP flag corresponding to real link state.
o  Allowed addressless interfaces.
o  IF_UP is now automatically calculated and set iff the interface
   is administratively up, has link up and has an IP address assigned.
   It may be IF_IGNORED, though (as in case of the loopback).
o  Any changes which include up/down transition are considered small
   enough to not provoke artificial upping and downing of the interface.
o  When an interface disappears (i.e., it wasn't seen in the last scan),
   we announce this change only once.
o  IF_LOOPBACK implies IF_IGNORE.
1999-03-02 17:28:06 +00:00
Martin Mares
783f8b689a When protocols go down, prune the neighbor list. 1999-02-13 20:55:08 +00:00
Martin Mares
4e9498cbb1 config->router_id works again. 1999-02-13 18:42:00 +00:00
Martin Mares
31b3e1bbf5 Implemented new configuration/reconfiguration interface and defined protocol
state machines. Full explanation will follow soon.
1999-02-05 21:37:34 +00:00
Pavel Machek
77cedad1f6 Keep protocol data out of iface_patt. 1999-01-12 16:41:34 +00:00
Pavel Machek
2d9290e973 Rip now has configurable per-interface metric (please rewiev), and few
more configurable parameters. To do that, union was added into iface_patt.
1998-12-04 11:45:51 +00:00
Martin Mares
ed45f2e126 Added functions for manipulating interface name pattern lists:
o  iface_patt_match(list, iface) -- match interface against list
   o  iface_patts_equal(a, b, c) -- compare whether two pattern lists are
      equal or not. c(x,y) is called for comparison of protocol-dependent
      data.
1998-11-29 22:01:03 +00:00
Martin Mares
7d83290780 Generate router_id automatically if possible (standard "smallest of local
regular interface addresses" rule).

Protocols should NOT rely on router_id existence -- when router ID is not
available, the router_id variable is set to zero and protocols requiring
valid router ID should just refuse to start, reporting such error to the log.
1998-10-19 18:13:36 +00:00
Martin Mares
2a900b1b15 Fixed misleading comment. 1998-10-17 11:26:28 +00:00
Martin Mares
47b793064c Solve chicken-and-egg problems with protocol startup. We now queue all inactive
protocols and don't send route/interface updates to them and when they come up,
we resend the whole route/interface tables privately.

Removed the "scan interface list after protocol start" work-around.
1998-10-17 11:05:18 +00:00
Martin Mares
620a355a15 Now sending IF_CHANGE_CREATE when a new interface appears and IF_CHANGE_UP
only if it's really up.
1998-06-04 20:30:11 +00:00
Martin Mares
4cc78c5082 - Rewrote whole interface logic. Removed support for multiple addresses per
interface since it makes much trouble everywhere. Instead, we understand
  secondary addresses as subinterfaces.

- In case interface addresses or basic flags change, we simply convert it
  to a down/up sequence.

- Implemented the universal neighbour cache. (Just forget what did previous
  includes say of neighbour caching, this one is brand new.)
1998-06-01 21:41:11 +00:00
Martin Mares
8a48ecb8b1 Implemented scanning of network interfaces. Mostly very ugly code due to
terrible kernel interface (SIOGIFCONF and friends).
1998-05-26 21:42:05 +00:00
Martin Mares
b53499cdaa Added interface index (used only by OS-dependent code since ifindexes itself
are OS-dependent).
1998-05-24 14:48:09 +00:00
Martin Mares
235562ca5a Point-to-point links: added address of the opposite end. 1998-05-24 09:20:59 +00:00
Martin Mares
a8b6038225 Next attempt on data structures... 1998-05-03 16:42:45 +00:00
Martin Mares
1feea03e74 Changed #include <x/y> to #include "x/y" for our local includes, so that
gcc -MM can be used to separate them from the system ones.

Added automatic generation of dependencies.
1998-04-28 14:39:34 +00:00
Martin Mares
c40e05a0df Added IP address manipulation macros, interface declarations and logging. 1998-04-23 14:01:15 +00:00
Martin Mares
58ef912c6b First look at data structures. More to come tomorrow... 1998-04-22 12:58:34 +00:00