Commit graph

71 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
b174cc0abc Babel: Add MAC authentication support - update
Some cleanups and bugfixes to the previous patch, including:

 - Fix rate limiting in index mismatch check

 - Fix missing BABEL_AUTH_INDEX_LEN in auth_tx_overhead computation

 - Fix missing auth_tx_overhead recalculation during reconfiguration

 - Fix pseudoheader construction in babel_auth_sign() (sport vs fport)

 - Fix typecasts for ptrdiffs in log messages

 - Make auth log messages similar to corresponding RIP/OSPF ones

 - Change auth log messages for events that happen during regular
   operation to debug messages

 - Switch meaning of babel_auth_check*() functions for consistency
   with corresponding RIP/OSPF ones

 - Remove requirement for min/max key length, only those required by
   given MAC code are enforced
2021-06-06 16:28:18 +02:00
Toke Høiland-Jørgensen
b218a28f61 Babel: Add MAC authentication support
This implements support for MAC authentication in the Babel protocol, as
specified by RFC 8967. The implementation seeks to follow the RFC as close
as possible, with the only deliberate deviation being the addition of
support for all the HMAC algorithms already supported by Bird, as well as
the Blake2b variant of the Blake algorithm.

For description of applicability, assumptions and security properties,
see RFC 8967 sections 1.1 and 1.2.
2021-06-06 16:28:18 +02:00
Toke Høiland-Jørgensen
69d10132a6 Babel: Refactor TLV parsing code for easier reuse
In preparation for adding authentication checks, refactor the TLV
walking code so it can be reused for a separate pass of the packet
for authentication checks.
2021-06-06 16:28:18 +02:00
Maria Matejka
ebd5751cde Babel: Seqno requests are properly decoupled from neighbors when the underlying interface disappears
When an interface disappears, all the neighbors are freed as well. Seqno
requests were anyway not decoupled from them, leading to strange
segfaults. This fix adds a proper seqno request list inside neighbors to
make sure that no pointer to neighbor is kept after free.
2021-05-30 13:29:21 +02:00
Ondrej Zajicek (work)
c1511b92cc Babel: Log the reason when refusing to run on an interface
The babel protocol code checks whether iface supports multicast, and
whether it has a link-local address assigned. However, it doesn not give
any feedback if any of those checks fail, it just silently ignores the
interface. Fix this by explicitly logging when multicast check fails.

Based on patch from Toke Høiland-Jørgensen, thanks!
2021-05-10 20:09:31 +02:00
Toke Høiland-Jørgensen
db2d29073a lib/slab: introduce sl_allocz() function and use it in Babel
The babel protocol code was initialising objects returned from the slab
allocator by assigning to each of the struct members individually, but
wasn't touching the NODE member while doing so. This leads to warnings on
debug builds since commit:

baac700906 ("List expensive check.")

To fix this, introduce an sl_allocz() variant of the slab allocator which
will zero out the memory before returning it, and switch all the babel call
sites to use this version. The overhead for doing this should be negligible
for small objects, and in the case of babel, the largest object being
allocated was being zeroed anyway, so we can drop the memset in
babel_read_tlv().
2020-11-24 02:36:31 +01:00
Ondrej Zajicek (work)
c26c6bc2d7 Show info from multiple protocols when protocol is not specified
Most commands like 'show ospf neighbors' fail when protocol is not
specified and there are multiple instances of given protocol type.
This is annoying in BIRD 2, as many protocols have IPv4 and IPv6
instances. The patch changes that by showing output from all protocol
instances of appropriate type.

Note that the patch also removes terminating cli_msg() call from these
commands and moves it to the common iterating code.
2020-06-28 15:38:47 +02:00
Ondrej Zajicek (work)
4e8f8afc68 Babel: Set onlink flag for IPv4 routes with unreachable next hop
If the next hop of a route is not a reachable address, the route should be
installed as onlink. This enables a configuration common in mesh networks
where the mesh interface is assigned a /32 and babel handles the routing by
installing onlink routes.

Thanks to Toke Hoiland-Jorgensen for the patch.
2020-05-26 23:43:13 +02:00
Maria Matejka
258be56539 Nest: Added const to ea_show just to declare that this shouldn't really change anything 2020-05-01 15:19:12 +02:00
Maria Matejka
fd9f0c0640 Configuration strings are constant.
This is merely a const propagation. There was no problem in there.
2020-04-09 15:37:14 +02:00
Maria Matejka
78976974e7 Dynamic attributes definition split whether it is bitmask or not. 2019-07-03 00:00:11 +02:00
Maria Matejka
8d65add626 Merge branch 'master' into HEAD 2019-03-18 12:54:40 +01:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Maria Matejka
c0e958e022 Filter + Config: Fix bugs, tests and split symbols by type 2019-02-20 22:30:54 +01:00
Maria Matejka
4c553c5a5b Filter refactoring: dropped the recursion from the interpreter
This is a major change of how the filters are interpreted. If everything
works how it should, it should not affect you unless you are hacking the
filters themselves.

Anyway, this change should make a huge improvement in the filter performance
as previous benchmarks showed that our major problem lies in the
recursion itself.

There are also some changes in nest and protocols, related mostly to
spreading const declarations throughout the whole BIRD and also to
refactored dynamic attribute definitions. The need of these came up
during the whole work and it is too difficult to split out these
not-so-related changes.
2019-02-20 22:30:54 +01:00
Ondrej Zajicek (work)
3a2a3c7325 Doc: Rename code documentation files back to Doc 2018-12-14 02:03:42 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
e2ae08694e Nest: Do not hard-reset interface when preferred address is changed
Modify protocols to use preferred address change notification instead on
depending on hard-reset of interfaces in that case, and remove hard-reset
in that case. This avoids issue when e.g. IPv6 protocol restarts
interface when IPv4 preferred address changed (as hard-reset is
unavoidable and common for whole iface).

The patch also fixes a bug when removing last address does not send
preferred address change notification.
2018-11-28 16:55:32 +01:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Ondrej Zajicek (work)
7b9b0c0a00 Cleanup some warnings 2018-07-03 18:08:35 +02:00
Maria Matejka
c2fc4c10ac Doc: renamed progdoc files Doc -> progdoc to fix collision with doc/ folder on case-insensitive filesystems 2018-06-26 17:09:12 +02:00
Jan Maria Matejka
f851f0d7e3 Config: Dropping CF_ADDTO. 2018-06-26 14:29:03 +02:00
Jan Maria Matejka
1ef23f05ee Merge branch 'int-new' into HEAD 2018-06-19 14:32:16 +02:00
Ondrej Zajicek (work)
caa9d03d65 Babel: Fix handling of missing IPv4 next hops
In case of missing IPv4 next hop, we should skip such routes
on transmit and ignore such routes on receive.

Thanks to Julian Schuh for the bugreport and Toke Hoiland-Jorgensen
for the original patch.
2018-06-13 15:22:29 +02:00
Jan Maria Matejka
13c0be19d3 Nest: Removing separate tmpa from route propagation
This is a fundamental change of an original (1999) concept of route
processing inside BIRD. During import/export, there was a temporary
ea_list created which was to be used instead of the another one inside
the route itself.

This led to some confusion, quirks, and strange filter code that handled
extended route attributes. Dropping it now.

The protocol interface has changed in an uniform way -- the
`struct ea_list *attrs` argument has been removed from store_tmp_attrs(),
import_control(), rt_notify() and get_route_info().
2018-05-30 17:08:49 +02:00
Jan Maria Matejka
ee7e2ffd26 Protocol: Introducing an enum protocol_class
This supersedes the EAP_* constants.
2018-05-29 12:35:06 +02:00
Ondrej Zajicek (work)
feae132e0f Do not initialize route metrics in import_control hook
During route export, the receiving protocol often initialized route
metrics to default value in its import_control hook before export filter
was executed. This is inconsistent with the expectation that an export
filter would process the same route as one in the routing table and it
breaks setting these metrics before (e.g. for static routes directly in
static protocol).

The patch removes the initialization of route metrics in import_control
hook, the default values are already handled in rt_notify hook called
after export filters.

The patch also changed the behavior of OSPF to keep metrics when a route
is reannounced between OSPF instances (to be consistent with other
protocols) and the behavior when both ospf_metric1 and ospf_metric2
are specified (to have more expected behavior).
2018-05-24 14:51:05 +02:00
Ondrej Zajicek (work)
70fab17837 Babel: Add option to randomize router ID
When a Babel node restarts, it loses its sequence number, which can cause
its routes to be rejected by peers until the state is cleared out by other
nodes in the network (which can take on the order of minutes).

There are two ways to fix this: Having stable storage to keep the sequence
number across restarts, or picking a different router ID each time.

This implements the latter, by introducing a new option that will cause
BIRD to randomize a high 32 bits of router ID every time it starts up.
This avoids the problem at the cost of not having stable router IDs in
the network.

Thanks to Toke Hoiland-Jorgensen for the patch.
2018-05-03 16:55:11 +02:00
Ondrej Zajicek (work)
23b079043b Babel: Fix type of route entry router ID
The router ID being assigned to routes was a uint, which discards the
upper 32 bits. This also has the nice side effect of echoing the wrong
router ID back to other routers.

Thanks to Toke Hoiland-Jorgensen for the patch.
2018-05-03 16:02:29 +02:00
Ondrej Zajicek (work)
d0f47327f8 Merge branch 'master' into int-new 2018-03-07 17:41:49 +01:00
Ondrej Zajicek (work)
2d6d4b8053 Babel: Fix build with restricted protocol set
All keywords used in Babel config have to be declared locally.

Thanks to Leo Vandewoestijne for the bugreport.
2018-03-07 17:35:24 +01:00
Ondrej Zajicek (work)
5ce7adfcf9 Babel: Fix accidental bitwise or assignment
Fix an accidental bitwise or assignment that was supposed to be a
comparison.

Thanks to Toke Hoiland-Jorgensen for the patch.
2018-02-13 16:42:03 +01:00
Ondrej Zajicek (work)
185a0a51f8 Babel: Add source-specific routing support
This patch adds support for source-specific routing to the Babel protocol.
It changes the protocol to support both NET_IP6 and NET_IP6_SADR channels
for IPv6 addresses. If only a NET_IP6 channel is configured,
source-specific updates are ignored. Otherwise, non-source-specific
routes are simply treated as source-specific routes with SADR prefix 0.

Thanks to Toke Hoiland-Jorgensen for the original patch.
Minor changes by Ondrej Santiago Zajicek.
2018-02-13 16:40:14 +01:00
Ondrej Zajicek (work)
830ba75e6d Merge commit '1e8721e2aeccfbc3f533e8b8abc07582cee77e9a' into int-new 2017-12-07 21:54:47 +01:00
Ondrej Zajicek (work)
46434a3cad Merge commit '7b2c5f3d2826e3175bf31b1c36056c9efc587a2b' into int-new 2017-12-07 18:35:46 +01:00
Ondrej Zajicek (work)
a6f79ca57f Timers: Revert temporary names and remove old timer.h 2017-12-07 13:54:59 +01:00
Ondrej Zajicek (work)
3b3b0910ff Babel: More changes and bugfixes
Several changes and bugfixes in Babel, namely:

- Exported route parameters stored directly in route table entry
- Exported non-babel routes no longer stored in per-entry route list
- Route update, selection and retraction simplified and fixed
- Route feasibility is evalualated per update and stored with route
- Unreachable route handling fixed, based on hold interval
- Added 'show babel routes' command

Overall, it fixes some issues with proper propagation of triggered
updates, making Babel convergence after topology change almost
instant.
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
dbf1ed263c Babel: Fix handling of seqno requests
Old behavior has several deficiencies compared to standard behavior
(no triggered updates for replies, no retransmissions, ...).
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
672fb78e12 Babel: Fix handling of IPv4 retractions
Babel TLV parsing code rejected IPv4 retractions without next-hop,
although next-hop is needed just for regular updates.
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
268dc7c8b3 Babel: Remove babel_proto ptr from babel_entry 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
738a57b69b Babel: Fix hello timeout for short hello intervals 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
b47eaefe12 Babel: Revamp cost computation and run route selection when cost change
Also fix several minor bugs and add 'limit' option for k-out-of-j
link sensing strategy. Change default from 8-of-16 to 12-of-16.
Change IHU expiry factor from 1.5 to 3.5 (as in RFC 6126).
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
f00221fadb Babel: Fix unicast seqno requests 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
38f4721092 Babel: Avoid batch seqno updates 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
5ee69d11f2 Babel: Fix Hello and IHU expiration 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
8b58f565e4 Babel: Update to new timers 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
025525266f Timers: Replace old timers with microsecond timers
The old timer interface is still kept, but implemented by new timers. The
plan is to switch from the old inteface to the new interface, then clean
it up.
2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
153f02da3b Nest: Maintain separate IPv4, IPv6 and LLv6 preferred addresses
Also redesign preferred address selection and update protocols to use
appropriate preferred address.

Based on a previous work by Jan Maria Matejka.
2017-12-07 13:06:01 +01:00
Ondrej Zajicek (work)
1e8721e2ae Babel: Parse flags in Hello TLV
RFC6126bis introduces a flags field for the Hello TLV, and adds a unicast flag
that is used to signify that a hello was sent as unicast. This adds parsing of
the flags field and ignores such unicast hellos, which preserves compatibility
until we can add a proper implementation of the unicast hello mechanism.

Thanks to Toke Hoiland-Jorgensen for the patch.
2017-11-28 19:33:33 +01:00
Jan Maria Matejka
4ae3ee1200 Babel: Interface address irrelevant for interface pattern matching. 2017-10-17 16:52:18 +02:00