Commit graph

270 commits

Author SHA1 Message Date
Maria Matejka
ff397df7ed Routing table is now a resource allocated from its own pool
This also fixes memory leaks from import/export tables being never
cleaned up and freed.
2021-03-30 21:56:08 +02:00
Maria Matejka
4635314cef Routing tables list iteration should use explicit node struct position 2021-03-30 21:56:08 +02:00
Ondrej Zajicek (work)
00b85905b9 Nest: Automatic channel reloads based on RPKI changes
If there are roa_check() calls in channel filters, then the channel
subscribes to ROA table notifications, which are sent when ROA tables
are updated (subject to settle time) and trigger channel reload or
refeed.
2021-02-10 03:09:57 +01:00
James Lu
455c13dc99 Nest: Read Babel metric as IGP metric
(Minor syntactic changes by committer)
2020-12-29 02:25:21 +01:00
Ondrej Zajicek (work)
61dae32b29 Nest: Per-channel debug flags
The patch add support for per-channel debug flags, currently just
'states', 'routes', and 'filters'. Flag 'states' is used for channel
state changes, remaining two for routes passed through the channel.
The per-protocol debug flags 'routes'/'filters' still enable reporting
of routes for all channels, to keep existing behavior.

The patch causes minor changes in some log messages.
2020-12-07 22:19:40 +01:00
Ondrej Zajicek (work)
b962967e20 Nest: Fix crash in receive limit handling in import table
Logging as a result of triggered receive limit in import table code
accesset rte->net, which was not filed yet.

Thanks to Pier Carlo Chiodi for the bugreport.
2020-11-15 16:01:19 +01:00
Ondrej Zajicek (work)
c0e1f534c9 Nest: Keep route ordering during route updates
Put new non-best routes to the end of list instead of the second
position. Put updated routes to their old position. Position is changed
just by best route selection.
2020-07-16 15:02:10 +02:00
Maria Matejka
3bb10b4d31 Uninitialized list nodes fixes 2020-05-01 15:19:12 +02:00
Ondrej Zajicek (work)
2755002890 Filter: Optimize IPv4 prefix sets
Use separate IPv4 and IPv6 implementation of prefix sets. Just this
change makes IPv4 prefix sets 60% smaller and 50% faster.
2020-03-26 03:57:48 +01:00
Ondrej Zajicek (work)
7d767c5a3d KRT: Improve syncer code to avoid using temporary data in rtable
The old code stored route verdicts and temporary routes directly in
rtable. The new code do not store received routes (it immediately
compares them with exported routes and resolves conflicts) and uses
internal bitmap to keep track of which routes were received and which
needs to be reinstalled.

By not putting 'invalid' temporary routes to rtable, we keep rtable
in consistent state, therefore scan no longer needs to be atomic
operation and could be splitted to multiple events.
2020-01-07 18:35:03 +01:00
Ondrej Zajicek (work)
5ea39eaa96 Nest: Use bitmaps to keep track of exported routes
Use a hierarchical bitmap in a routing table to assign ids to routes, and
then use bitmaps (indexed by route id) in channels to keep track whether
routes were exported. This avoids unreliable and inefficient re-evaluation
of filters for old routes in order to determine whether they were exported.
2019-11-26 18:39:25 +01:00
Ondrej Zajicek (work)
08c4c9a30b Nest: Fix bug in export table
For regular channels do not compare src in export table, as we want to
keep here only the best (exported) route per network.
2019-11-03 20:25:42 +01:00
Ondrej Zajicek (work)
843b10c8b0 Nest: Handle non-MPLS on MPLS case in recursive route update
When non-MPLS recursive route resolves to MPLS underlying route,
then it should get MPLS labels from the the underlying route.
2019-10-10 15:25:36 +02:00
Ondrej Zajicek (work)
9eace84342 Nest: Handle PtP links in recursive route update
Underlying (IGP) route may lead to PtP link, in this case it does not
need gateway. Which is different than direct route without gateway.

When recursive (BGP) route uses PtP route, it should not use recursive
next hop as immediate next hop, while for direct routes it should.
2019-10-10 15:06:32 +02:00
Ondrej Zajicek (work)
cb2b6e0494 Nest: Fix recursive route update
Missing cleanup can lead to dangling pointer to old next hops.
2019-10-10 14:01:16 +02:00
Ondrej Zajicek (work)
09ee846d92 BGP: AIGP metric support (RFC 7311) 2019-10-09 17:53:23 +02:00
Ondrej Zajicek (work)
ca2dacfcee Nest: Fix bug in export table
Exported route may be in modified state, we need to get cached one for
rte_same() and rta_clone() to work properly.
2019-09-24 17:17:37 +02:00
Maria Matejka
32a254050d Channel refeed with import table splitting between routes for one prefix 2019-08-27 19:14:15 +02:00
Ondrej Zajicek (work)
b7d7599ce3 BGP: implement Adj-RIB-Out
The patch implements optional internal export table to a channel and
hooks it to BGP so it can be used as Adj-RIB-Out. When enabled, all
exported (post-filtered) routes are stored there. An export table can be
examined using e.g. 'show route export table bgp1.ipv4'.
2019-08-14 06:02:33 +02:00
Maria Matejka
7078aa63ae Fixed one warning and one undefined value. 2019-03-22 21:40:35 +01:00
Maria Matejka
8d65add626 Merge branch 'master' into HEAD 2019-03-18 12:54:40 +01:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Ondrej Zajicek (work)
9aa77fcceb OSPF: Improved handling of tmpattrs
Keep track of whether OSPF tmpattrs are actually defined for given route
(using flags in rte->pflags). That makes them behave more like real
eattrs so a protocol can define just a subset of them or they can be
undefined by filters.

Do not set ospf_metric2 for other than type 2 external OSPF routes and do
not set ospf_tag for non-external OSPF routes. That also fixes a bug
where internal/inter-area route propagated from one OSPF instance to
another is initiated with infinity ospf_metric2.

Thanks to Yaroslav Dronskii for the bugreport.
2019-03-06 18:28:00 +01:00
Ondrej Zajicek (work)
93af78d2d2 Nest: Do not compare rte.flags during rte_update()
Route flags are mosty internal state of rtable, they are not significant
to whether a route has changed. With the old code, all routes received as
a part of enhanced route refresh are always re-announced to other peers
due to change in REF_STALE.
2019-02-22 02:16:39 +01:00
Maria Matejka
0b39b1cbb7 Conf: Symbol implementation converted from void pointers to union
... and consted some declarations.
2019-02-20 22:30:55 +01:00
Maria Matejka
4f082dfa89 Filter: merged filter instruction constructors, counting line size on instruction construct 2019-02-20 22:30:54 +01:00
Maria Matejka
8bdb05edb2 Filters: split the large filter.h file to smaller files.
This should be revised, there are still ugly things in the filter API.
2019-02-20 22:30:54 +01:00
Ondrej Zajicek (work)
3a8ca7abbc Nest: Prevent withdraws from propagation back to source protocol (for accepted mode)
Update for one of previous patches, handles the the issue for
first-accepted mode of route propagation.
2019-02-19 16:26:09 +01:00
Ondrej Zajicek (work)
cd16538fc9 Merge remote-tracking branch 'origin/mq-opt' 2019-02-09 15:53:16 +01:00
Ondrej Zajicek (work)
6e8fb66859 Nest: Improve export counter handling
One of previous workarounds for phantom route avoidance breaks export
counters by expanding sending of spurious withdraws, which are send when
we are not sure whether we have advertised that routes in the past.
If not, then export counter is decreased, but it was not increased
before, so it overflows under zero.

The patch fixes that by sendung spurious withdraws, but not counting them
on export counter. That may lead to error in the other direction, but that
happens only as a race condition (i.e., in normal operation filters
return proper values about old route export state).
2019-02-05 19:00:43 +01:00
Ondrej Zajicek (work)
e1c275d87b Nest: Reestablish preferred counters 2019-02-02 13:28:16 +01:00
Maria Matejka
c65a9a05f9 Nest: Don't lookup net in table before filters are run.
Using dummy net instead. This should help with performance on rejected
routes.
2019-01-31 15:02:15 +01:00
Ondrej Zajicek (work)
e84c81b76f Nest: Prevent withdraws from propagation back to source protocol
The earlier fix loosen conditions for not running filters on old
route when deciding about route propagation to a protocol to avoid
issues with ghost routes in some race conditions.

Unfortunately, the fix also caused back-propagation of withdraws. For
regular updates, back-propagation is prevented in import_control hooks,
but these are not called on withdraws. For them, import_control hooks
are called on old routes instead, changing (old, NULL) notification
to (NULL, NULL), which is ignored. By not calling export processing
in some cases, the withdraw is not ignored and is back-propagated.

This patch fixes that by contract conditions so the earlier fix is not
applied to back-propagated updates.
2019-01-30 17:25:21 +01:00
Jan Maria Matejka
9548888599 Nest: Don't make tmp_attr before preexport is called 2019-01-17 13:50:47 +01:00
Ondrej Zajicek (work)
67d8665af5 Nest: Update statistics and rx-limit for Adj-RIB-In 2018-12-12 14:46:24 +01:00
Ondrej Zajicek (work)
682d3f7de0 BGP: implement Adj-RIB-In
The patch implements optional internal import table to a channel and
hooks it to BGP so it can be used as Adj-RIB-In. When enabled, all
received (pre-filtered) routes are stored there and import filters can
be re-evaluated without explicit route refresh. An import table can be
examined using e.g. 'show route import table bgp1.ipv4'.
2018-12-12 14:46:24 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
863ecfc785 The MRT protocol
The new MRT protocol is responsible for periodic RIB table dumps in the
MRT format (RFC 6396). Also the existing code for BGP4MP MRT dumps is
refactored and splitted between BGP to MRT protocols, will be more
integrated into MRT in the future.

Example:

protocol mrt {
        table "*";
        filename "%N_%F_%T.mrt";
        period 60;
}

It is partially based on the old MRT code from Pavel Tvrdik.
2018-11-20 17:45:35 +01:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Ondrej Zajicek (work)
5bd734317c BGP: Long-lived graceful restart
The patch implements long-lived graceful restart for BGP, namely
draft-uttaro-idr-bgp-persistence-03.
2018-07-31 18:40:38 +02:00
Ondrej Zajicek (work)
092c493027 Nest: Fix race condition during reconfiguration, part 2
If export filter is changed during reconfiguration and a route disappears
between reconfiguration and refeed (e.g., if the route is a static route
also removed during the reconfiguration), the route is not withdrawn.

The issue was fixed for regular channels by an earlier patch. This patch
fixes the issue for channels in RA_ACCEPTED mode (first-pass-the-filter),
used by BGP with 'secondary' option.
2018-07-06 02:04:45 +02:00
Ondrej Zajicek (work)
a81e18da25 Nest: Fix race condition during reconfiguration
If export filter is changed during reconfiguration and a route disappears
between reconfiguration and refeed (e.g., if the route is a static route
also removed during the reconfiguration), the route is not withdrawn.
The patch fixes that by adding tx reconfiguration timestamp.
2018-07-03 18:00:52 +02:00
Ondrej Zajicek (work)
586c1800c4 Nest: Neighbor cache cleanups
Simplify neighbor cache code, fix several minor bugs, and improve
handling of ONLINK flag.
2018-06-27 16:57:07 +02:00
Jan Maria Matejka
13c0be19d3 Nest: Removing separate tmpa from route propagation
This is a fundamental change of an original (1999) concept of route
processing inside BIRD. During import/export, there was a temporary
ea_list created which was to be used instead of the another one inside
the route itself.

This led to some confusion, quirks, and strange filter code that handled
extended route attributes. Dropping it now.

The protocol interface has changed in an uniform way -- the
`struct ea_list *attrs` argument has been removed from store_tmp_attrs(),
import_control(), rt_notify() and get_route_info().
2018-05-30 17:08:49 +02:00
Ondrej Zajicek (work)
bcb4af81fc Nest: Fix table reconfiguration when nettype changes
Thanks to Toke Hoiland-Jorgensen for the bugreport.
2018-03-18 13:48:47 +01:00
Ondrej Zajicek (work)
be17805c0b Add support for source-specific IPv6 routes to BIRD core
This patch adds support for source-specific IPv6 routes to BIRD core.
This is based on Dean Luga's original patch, with the review comments
addressed. SADR support is added to network address parsing in confbase.Y
and to the kernel protocol on Linux.

Currently there is no way to mix source-specific and non-source-specific
routes (i.e., SADR tables cannot be connected to non-SADR tables).

Thanks to Toke Hoiland-Jorgensen for the original patch.
Minor changes by Ondrej Santiago Zajicek.
2018-02-13 16:39:07 +01:00
Ondrej Zajicek (work)
a82f692e58 Nest: Trivial whitespace cleanup 2018-02-07 17:12:33 +01:00
Ondrej Zajicek (work)
28b3b55122 KRT: Fix IPv6 route learn
Internal table used for route learn was created with non-matching net
type for IPv6 kernel proto.

Thanks to Toke Hoiland-Jorgensen for the bugreport
2018-02-06 16:08:45 +01:00
Ondrej Zajicek (work)
85ad5855a0 Nest: Fix corner case in recursive next hop lookup
Thanks to Svenne Krap for the bugreport.
2018-01-29 12:49:37 +01:00
Ondrej Zajicek (work)
75d98b6013 Merge branch 'master' into int-new 2018-01-23 18:29:32 +01:00