Commit graph

52 commits

Author SHA1 Message Date
Ondrej Zajicek
a506476acd There may be more IP address records with the same IP. 2011-05-01 18:42:32 +02:00
Ondrej Zajicek
52a43ae3b7 Minor changes in addresses.
Mainly changes IA_UNNUMBERED to IA_PEER and adds IA_HOST. Also do not
show broadcast addr in show interfaces. Nobody cares for that.
2011-03-28 22:46:18 +02:00
Ondrej Zajicek
8cab377d92 Remove unnecessary check. 2010-12-22 23:33:40 +01:00
Ondrej Zajicek
fe181e7c63 Adds support for iface link check to static protocol. 2010-11-11 12:24:27 +01:00
Ondrej Zajicek
f25cb0ef9f Implements link state detection.
Also changes some symbol names (IFF_ADMIN_DOWN -> IFF_SHUTDOWN,
IFF_LINK_UP -> IFF_ADMIN_UP).
2010-11-11 10:03:02 +01:00
Ondrej Zajicek
5d53b80770 Allow iface pattern matching code to match peer address on ptp links. 2010-03-19 18:46:56 +01:00
Ondrej Zajicek
0aad2b9292 Temporary OSPF commit - sockets. 2010-03-14 16:36:59 +01:00
Ondrej Zajicek
53434e44a9 Better flushing of interfaces.
When device protocol goes down, interfaces should be flushed
asynchronously (in the same way like routes from protocols are flushed),
when protocol goes to DOWN/HUNGRY.

This fixes the problem with static routes staying in kernel routing
table after BIRD shutdown.
2010-02-27 16:00:07 +01:00
Ondrej Zajicek
874b868544 Implements primary address selection base on 'primary' option. 2009-05-29 22:49:30 +02:00
Ondrej Zajicek
20e94fb85b A change in OSPF and RIP interface patterns.
Allows to add more interface patterns to one common 'options'
section like:

interface "eth3", "eth4" { options common to eth3 and eth4 };

Also removes undocumented and unnecessary ability to specify
more interface patterns with different 'options' sections:

interface "eth3" { options ... }, "eth4" { options ... };
2009-05-06 22:02:45 +02:00
Martin Mares
7b7a7b43a6 There can be multiple primary addresses with different scopes
and only the highest scope one has IA_PRIMARY set, so report
the remaining ones as "Unselected".
2003-02-22 22:39:06 +00:00
Ondrej Filip
a5096a1bde Yet another nasty bugfix of iface_patts_equal(). 2000-11-08 22:46:54 +00:00
Ondrej Filip
0639f7263a Bugfix in iface_patts_equal.
When both patterns were NULL strcmp it sigfaulted.
2000-11-08 17:06:35 +00:00
Martin Mares
5c18880e35 Avoid sentence containing a colon to start new doc subsection. 2000-06-05 21:26:11 +00:00
Martin Mares
3d675cdbe7 More documentation. 2000-06-03 14:40:39 +00:00
Martin Mares
9a220cabbc #ifdef out lots of debugging information.
The long resource/routing table dump printed upon startup is gone now
and if you wish to see it, just send bird SIGUSR1 or use the `debug'
commands.
2000-05-04 20:52:28 +00:00
Martin Mares
93a786cb03 Removed a lot of unused variables.
Please try compiling your code with --enable-warnings to see them. (The
unused parameter warnings are usually bogus, the unused variable ones
are very useful, but gcc is unable to control them separately.)
2000-05-04 20:30:36 +00:00
Martin Mares
85a291ff30 IPv6 address classification fixes. 2000-05-02 15:21:51 +00:00
Martin Mares
287111fed1 Fix stupid bug in neighbor cache. 2000-04-10 10:40:00 +00:00
Martin Mares
6b9fa32080 Great cleanup of debug messages. LOCAL_DEBUG turned off in most modules,
several debug() calls converted to DBG().
2000-03-12 21:01:38 +00:00
Martin Mares
6a9f28b0b9 Added tracing of interface events. 2000-03-12 20:50:35 +00:00
Martin Mares
85053fce04 Reimplemented neighbor cache. Now uses real hashing. 2000-03-01 14:51:47 +00:00
Martin Mares
6a636392d3 Rewrote interface type detection logic. The `unnumbered' flag is now per
address, not per interface (hence it's ifa->flags & IA_UNNUMBERED) and
should be set reliably. IF_MULTIACCESS should be fixed now, but it isn't
wise to rely on it on interfaces configured with /30 prefix.
2000-02-29 23:19:52 +00:00
Martin Mares
f5ad9f87a3 Killed a couple of bugs in the neighbor cache.
Manual disable/enable/restart/shutdown/reconfiguration of protocols
no longer hangs on loops in neighbor lists :)
2000-01-19 11:52:32 +00:00
Martin Mares
f14a4becbe Reworked proto lists -- each proto is now in two lists: the global one
(proto_list) and per-type one (original lists). A lot of things simplified.

Implemented `disable', `enable' and `restart' CLI commands.
2000-01-16 23:30:06 +00:00
Martin Mares
476e108425 Minor cleanups. 1999-12-16 13:51:43 +00:00
Martin Mares
5954dcfab7 Introduced new protocol-dependent integer field `aux' to struct neighbor. 1999-12-01 11:59:24 +00:00
Martin Mares
0d3e6bceee show interfaces' and show protocols' works. 1999-11-30 12:57:14 +00:00
Martin Mares
ae97b946e9 Added few basic commands: show status, show interfaces [summary],
show protocols (incomplete).
1999-11-25 15:35:30 +00:00
Martin Mares
dce267832a Basic support for IPv6. The system-dependent part doesn't work yet,
but the core routines are there and seem to be working.

   o  lib/ipv6.[ch] written
   o  Lexical analyser recognizes IPv6 addresses and when in IPv6
      mode, treats pure IPv4 addresses as router IDs.
   o  Router ID must be configured manually on IPv6 systems.
   o  Added SCOPE_ORGANIZATION for org-scoped IPv6 multicasts.
   o  Fixed few places where ipa_(hton|ntoh) was called as a function
      returning converted address.
1999-08-03 19:36:06 +00:00
Martin Mares
8edf2361f9 Cleaned up handling of interface patterns:
o  Parsing of interface patterns moved to generic code,
      introduced this_ipatt which works similarly to this_iface.
   o  Interface patterns now support selection by both interface
      names and primary IP addresses.
   o  Proto `direct' updated.
   o  RIP updated as well, it also seems the memory corruption
      bug there is gone.
1999-08-03 19:30:49 +00:00
Martin Mares
a2697f02ac Netlink support for secondary interface addresses. 1999-05-07 13:46:16 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
b5239f2238 Don't try to manipulate neighbor lists for copied interface structures.
This avoids few nasty references to free memory.
1999-03-26 21:33:36 +00:00
Martin Mares
e35ef181a4 o The if_change_too_big_p change was too high-spirited. Fixed.
o  Introduced if_find_by_index()
o  Recognizing two types of interface updates: full update (starting with
   if_start_update(), ending with if_end_update(), guaranteed to see
   all existing interfaces) and a partial update (only if_update(),
   usually due to asynchronous interface notifications).
1999-03-02 18:36:09 +00:00
Martin Mares
bcbd8cc3be Interface logic changes:
o  Introduced IF_LINK_UP flag corresponding to real link state.
o  Allowed addressless interfaces.
o  IF_UP is now automatically calculated and set iff the interface
   is administratively up, has link up and has an IP address assigned.
   It may be IF_IGNORED, though (as in case of the loopback).
o  Any changes which include up/down transition are considered small
   enough to not provoke artificial upping and downing of the interface.
o  When an interface disappears (i.e., it wasn't seen in the last scan),
   we announce this change only once.
o  IF_LOOPBACK implies IF_IGNORE.
1999-03-02 17:28:06 +00:00
Martin Mares
d1f7eab6b5 Parameter order for the proto->if_notify hook was different in the include
file and different in reality. Decided to use the same order as we do
for proto->rt_notify (i.e., first new value and second the old one).
1999-02-13 21:58:53 +00:00
Martin Mares
3fb4ca2ce2 Don't send any neighbor notifications to protocols being flushed. 1999-02-13 20:57:47 +00:00
Martin Mares
783f8b689a When protocols go down, prune the neighbor list. 1999-02-13 20:55:08 +00:00
Martin Mares
4e9498cbb1 config->router_id works again. 1999-02-13 18:42:00 +00:00
Martin Mares
64011f898c struct proto again contains instance name (a copy of proto->cf->name). 1999-02-11 22:45:54 +00:00
Martin Mares
31b3e1bbf5 Implemented new configuration/reconfiguration interface and defined protocol
state machines. Full explanation will follow soon.
1999-02-05 21:37:34 +00:00
Martin Mares
08c69a7720 die() -> bug() where appropriate. 1998-12-20 14:27:37 +00:00
Martin Mares
436965d25e Aesthetic fix for neighbor cache debug dump. 1998-12-06 23:11:18 +00:00
Martin Mares
ed45f2e126 Added functions for manipulating interface name pattern lists:
o  iface_patt_match(list, iface) -- match interface against list
   o  iface_patts_equal(a, b, c) -- compare whether two pattern lists are
      equal or not. c(x,y) is called for comparison of protocol-dependent
      data.
1998-11-29 22:01:03 +00:00
Martin Mares
7d83290780 Generate router_id automatically if possible (standard "smallest of local
regular interface addresses" rule).

Protocols should NOT rely on router_id existence -- when router ID is not
available, the router_id variable is set to zero and protocols requiring
valid router ID should just refuse to start, reporting such error to the log.
1998-10-19 18:13:36 +00:00
Martin Mares
47b793064c Solve chicken-and-egg problems with protocol startup. We now queue all inactive
protocols and don't send route/interface updates to them and when they come up,
we resend the whole route/interface tables privately.

Removed the "scan interface list after protocol start" work-around.
1998-10-17 11:05:18 +00:00
Martin Mares
962ba482fd Use '%I' instead of dirty address printing hacks. 1998-06-17 14:36:02 +00:00
Martin Mares
620a355a15 Now sending IF_CHANGE_CREATE when a new interface appears and IF_CHANGE_UP
only if it's really up.
1998-06-04 20:30:11 +00:00
Martin Mares
d9f330c5ff Protocol hooks. All of them may be NULL. 1998-06-03 08:40:10 +00:00