Commit graph

1546 commits

Author SHA1 Message Date
Ondrej Zajicek
a9c19b923c BGP: Display neighbor port on show protocol 2022-05-21 16:21:34 +02:00
Ondrej Zajicek
7bb06b34a1 RPKI: Display cache server port on show protocol
Thanks to Luiz Amaral for the idea.
2022-05-21 16:03:08 +02:00
Luiz Amaral
9a9439d5e1 RPKI: Implement VRF support 2022-05-19 19:43:59 +02:00
Ondrej Zajicek
ba2a076001 BGP: Improve tx performance during feed/flush
The prefix hash table in BGP used the same hash function as the rtable.
When a batch of routes are exported during feed/flush to the BGP, they
all have similar hash values, so they are all crowded in a few slots in
the BGP prefix table (which is much smaller - around the size of the
batch - and uses higher bits from hash values), making it much slower due
to excessive collisions. Use a different hash function to avoid this.

Also, increase the batch size to fill 4k BGP packets and increase minimum
BGP bucket and prefix hash sizes to avoid back and forth resizing during
flushes.

This leads to order of magnitude faster flushes (on my test data).
2022-05-15 15:05:37 +02:00
Toke Høiland-Jørgensen
d829800138 Babel: Fix compilation when LOCAL_DEBUG is set in packets.c
The debug output was not updated with the rest of the code, so packets.c
fails to compile if LOCAL_DEBUG is set.
2022-04-22 17:04:56 +02:00
Toke Høiland-Jørgensen
4aef70136d Babel: Send out low-interval hello on shutdown
When shutting down a Babel instance we send a wildcard retraction to make
sure all peers can quickly switch to other route origins. Add another small
optimisation borrowed from babeld: sending a Hello message (along with the
retraction) with a very low interval.

This will cause neighbours to modify their expiry timers for the node's
state to quickly time it out, thus conserving resources in the network.
2022-04-22 16:43:17 +02:00
Ondrej Zajicek (work)
692055e3df BFD: Add 'strict bind' option
Add BFD protocol option 'strict bind' to use separate listening socket
for each BFD interface bound to its address instead of using shared
listening sockets.
2022-04-07 19:33:40 +02:00
Ondrej Zajicek (work)
fcb4dd0c83 Babel: Fix bug in iface reconfiguration
A recent change in Babel causes ifaces to disappear after
reconfiguration. The patch fixes that.

Thanks to Johannes Kimmel for an insightful bugreport.
2022-02-27 03:10:38 +01:00
Ondrej Zajicek (work)
53a2540687 Merge branch 'oz-trie-table' 2022-02-06 23:42:10 +01:00
Ondrej Zajicek (work)
1f2eb2aca8 BGP: Implement flowspec validation procedure
Implement flowspec validation procedure as described in RFC 8955 sec. 6
and RFC 9117. The Validation procedure enforces that only routers in the
forwarding path for a network can originate flowspec rules for that
network.

The patch adds new mechanism for tracking inter-table dependencies, which
is necessary as the flowspec validation depends on IP routes, and flowspec
rules must be revalidated when best IP routes change.

The validation procedure is disabled by default and requires that
relevant IP table uses trie, as it uses interval queries for subnets.
2022-02-06 23:27:13 +01:00
Ondrej Zajicek (work)
836a87b8ac Nest: Attach prefix trie to rtable for faster LPM and interval queries
Attach a prefix trie to IP/VPN/ROA tables. Use it for net_route() and
net_roa_check(). This leads to 3-5x speedups for IPv4 and 5-10x
speedup for IPv6 of these calls.

TODO:
 - Rebuild the trie during rt_prune_table()
 - Better way to avoid trie_add_prefix() in net_get() for existing tables
 - Make it configurable (?)
2022-02-06 23:27:13 +01:00
Ondrej Zajicek (work)
4c6ee53f31 BGP: Make routing loops silent
One of previous commits added error logging of invalid routes. This
also inadvertently caused error logging of route loops, which should
be ignored silently. Fix that.
2022-01-28 18:13:18 +01:00
Ondrej Zajicek (work)
963b2c7ce2 BGP: Use proper class in attribute error messages
Most error messages in attribute processing are in rx/decode step and
these use L_REMOTE log class. But there are few that are in tx/export
step and these should use L_ERR log class.

Use tx-specific macro (REJECT()) in tx/export code and rename field
err_withdraw to err_reject in struct bgp_export_state to ensure that
appropriate error reporting macros are called in proper contexts.
2022-01-28 05:35:22 +01:00
Ondrej Zajicek (work)
75d01ecc2d BGP: Improve 'invalid next hop' error reporting
Distinguish multiple causes of 'invalid next hop' message and report
the relevant next hop address.

Thanks to Simon Ruderich for the original patch.
2022-01-28 05:03:03 +01:00
Ondrej Zajicek (work)
9dbb7eb6eb BGP: Log route updates that were changed to withdraws
Typical BGP error handling is treat-as-withdraw, where an invalid route
is replaced with a withdraw. Log route network when it happens.
2022-01-24 03:44:21 +01:00
Ondrej Zajicek (work)
60e9def9ef BGP: Add option 'free bind'
The BGP 'free bind' option applies the IP_FREEBIND/IPV6_FREEBIND
socket option for the BGP listening socket.

Thanks to Alexander Zubkov for the idea.
2022-01-09 02:44:32 +01:00
Job Snijders
b9f38727a7 RPKI: Add contextual out-of-bound checks in RTR Prefix PDU handler
RFC 6810 and RFC 8210 specify that the "Max Length" value MUST NOT be
less than the Prefix Length element (underflow). On the other side,
overflow of the Max Length element also is possible, it being an 8-bit
unsigned integer allows for values larger than 32 or 128. This also
implicitly ensures there is no overflow of "Length" value.

When a PDU is received where the Max Length field is corrputed, the RTR
client (BIRD) should immediately terminate the session, flush all data
learned from that cache, and log an error for the operator.

Minor changes done by commiter.
2021-12-18 16:35:28 +01:00
Ondrej Zajicek (work)
f761be6b30 Nest: Clean up main channel handling
Remove assumption that main channel is the only channel.
2021-06-17 16:56:51 +02:00
Ondrej Zajicek (work)
6d26f85395 Babel: Simplify auth expiration
Just use hello_expiry for that, keep init_expiry for initial
unauthentized neighbors.
2021-06-09 19:31:55 +02:00
Ondrej Zajicek (work)
b174cc0abc Babel: Add MAC authentication support - update
Some cleanups and bugfixes to the previous patch, including:

 - Fix rate limiting in index mismatch check

 - Fix missing BABEL_AUTH_INDEX_LEN in auth_tx_overhead computation

 - Fix missing auth_tx_overhead recalculation during reconfiguration

 - Fix pseudoheader construction in babel_auth_sign() (sport vs fport)

 - Fix typecasts for ptrdiffs in log messages

 - Make auth log messages similar to corresponding RIP/OSPF ones

 - Change auth log messages for events that happen during regular
   operation to debug messages

 - Switch meaning of babel_auth_check*() functions for consistency
   with corresponding RIP/OSPF ones

 - Remove requirement for min/max key length, only those required by
   given MAC code are enforced
2021-06-06 16:28:18 +02:00
Toke Høiland-Jørgensen
b218a28f61 Babel: Add MAC authentication support
This implements support for MAC authentication in the Babel protocol, as
specified by RFC 8967. The implementation seeks to follow the RFC as close
as possible, with the only deliberate deviation being the addition of
support for all the HMAC algorithms already supported by Bird, as well as
the Blake2b variant of the Blake algorithm.

For description of applicability, assumptions and security properties,
see RFC 8967 sections 1.1 and 1.2.
2021-06-06 16:28:18 +02:00
Toke Høiland-Jørgensen
69d10132a6 Babel: Refactor TLV parsing code for easier reuse
In preparation for adding authentication checks, refactor the TLV
walking code so it can be reused for a separate pass of the packet
for authentication checks.
2021-06-06 16:28:18 +02:00
Ondrej Zajicek (work)
91d0458389 BGP: Ensure that freed neighbor entry is not accessed
Routes from downed protocols stay in rtable (until next rtable prune
cycle ends) and may be even exported to another protocol. In BGP case,
source BGP protocol is examined, although dynamic parts (including
neighbor entries) are already freed. That may lead to crash under some
race conditions. Ensure that freed neighbor entry is not accessed to
avoid this issue.
2021-06-01 02:20:26 +02:00
Maria Matejka
ebd5751cde Babel: Seqno requests are properly decoupled from neighbors when the underlying interface disappears
When an interface disappears, all the neighbors are freed as well. Seqno
requests were anyway not decoupled from them, leading to strange
segfaults. This fix adds a proper seqno request list inside neighbors to
make sure that no pointer to neighbor is kept after free.
2021-05-30 13:29:21 +02:00
Ondrej Zajicek (work)
10498b8e89 OSPF: Fix OSPFv3 in IPv4 mode with multiple areas
Some area handling code got confused by IPv4 setup in OSPFv3 mode.
2021-05-26 18:57:32 +02:00
Ondrej Zajicek (work)
c1511b92cc Babel: Log the reason when refusing to run on an interface
The babel protocol code checks whether iface supports multicast, and
whether it has a link-local address assigned. However, it doesn not give
any feedback if any of those checks fail, it just silently ignores the
interface. Fix this by explicitly logging when multicast check fails.

Based on patch from Toke Høiland-Jørgensen, thanks!
2021-05-10 20:09:31 +02:00
Ondrej Zajicek (work)
2a0af925b8 OSPF: Allow ifaces with host address as unnumbered PtP or PtMP ifaces
Ifaces with host address (/32) were forced to be stubby, but now they
can be used as PtP or PtMP. For these ifaces we need to:

 - Do not force stub mode
 - Accept packets from any IP as local
 - Accept any configured neighbor as local
 - Detect ifaces properly as unnumbered
 - Use ONLINK flag for nexthops
2021-05-10 13:39:55 +02:00
Ondrej Zajicek (work)
bc591061f6 OSPF: Packets on PtP networks should be always sent to AllSPFRouters
As specified in RFC 2328 8.1: "On physical point-to-point networks,
the IP destination is always set to the address AllSPFRouters."

Note that this likely break setups with multiple neighbors on a network
configured as PtP, which worked before. These should be configured as
PtMP.

Thanks to Senthil Kumar Nagappan for the original patch and to Joakim
Tjernlund for suggestions.
2021-05-09 15:26:13 +02:00
Ondrej Zajicek (work)
1647923bd8 OSPF: Minor refactoring of packet sending code
Common behavior for LSupd and delayed LSack moved to ospf_send_to_iface()
and other minor changes.
2021-05-09 14:51:39 +02:00
Maria Matejka
4635314cef Routing tables list iteration should use explicit node struct position 2021-03-30 21:56:08 +02:00
Ondrej Zajicek (work)
7a74ad5a61 BGP: Do not keep BAF_EXT_LEN flag internally
The flag makes sense just in external representation. It is reset during
BGP export, but keeping it internally broke MRT dumps for short attributes
that used it anyways.

Thanks to Simon Marsh for the bugreport and the patch.
2021-03-30 16:59:11 +02:00
Ondrej Zajicek (work)
5a6e8380f8 BGP: Do not show statistics
BGP statistics code was preliminary and i wanted to replace it by
separate 'show X stats' command. The patch hides the preliminary
output in 'show protocols all' so it is not part of the released
version.
2021-03-18 15:44:04 +01:00
Ondrej Zajicek (work)
454ae30445 RPKI: Improve error handling of DNS resolver 2021-03-17 17:24:00 +01:00
Ondrej Zajicek (work)
0a3db4c680 Minor fixes for restricted builds 2021-03-17 15:56:12 +01:00
Ondrej Zajicek (work)
2f98153490 Pipe: Propagate debug flags from protocol to channels
Pipe channels are kind-of implicit, so setting protocol debug flags
should also set pipe debug flags.
2021-03-16 20:10:00 +01:00
Ondrej Zajicek (work)
ae9ae864d3 OSPFv3: Update neighbor authentication state from Hello packets
In OSPFv3, only Hello and DBDes packets contain flags specifying whether
RFC 7166 authentication trailer is used. Other packets are processed
based on stored authentication state in neighbor structure. Update this
state with each received Hello to handle authentication change from
reconfigurations.

Thanks to Joakim Tjernlund and Kenth Eriksson for the bugreport.
2021-03-16 16:34:42 +01:00
Ondrej Zajicek (work)
9cf3d53311 Static: Implement reload hook 2021-03-10 15:07:19 +01:00
Ondrej Zajicek (work)
d3782c72b9 Nest: Add option to control automatic RPKI reload
Also, no automatic reload for BGP channels without import/export table.
2021-02-12 05:05:18 +01:00
Vincent Bernat
714238716e BGP: Add support for BGP hostname capability
This is an implementation of draft-walton-bgp-hostname-capability-02.
It is implemented since quite some time for FRR and in datacenter, this
gives a nice output to avoid using IP addresses.

It is disabled by default. The hostname is retrieved from uname(2) and
can be overriden with "hostname" option. The domain name is never set
nor displayed.

Minor changes by committer.
2021-02-10 16:53:57 +01:00
Ondrej Zajicek (work)
5d414309ec MRT: Fix MP-BGP next hops
Flag signalling that MP-BGP mode should be used got reset after first
batch of routes, so remaining routes were processed without that, leading
to missing MP_REACH_NLRI attribute.

Thanks to Piotr Wydrych for the bugreport.
2021-01-22 04:34:15 +01:00
Ondrej Zajicek (work)
d774f6d721 MRT: Fix IPv6 table dumps
Add fake MP_REACH_NLRI attribute with BGP next hop when encoding MRT
table dumps for IPv6 routes. That is necessary to encode next hop as
NEXT_HOP attribute is not used for MP-BGP.

Thanks to Santiago Aggio for the bugreport.
2021-01-12 15:37:01 +01:00
Ondrej Zajicek (work)
910adaa08b BFD: Dispatch sessions also by interface index
Direct BFD sessions needs to be dispatched not only by IP addresses, but
also by interfaces, in order to avoid collisions between neighbors with
the same IPv6 link-local addresses.

Extend BFD session hash_ip key by interface index to handle that. Use 0
for multihop sessions.

Thanks to Sebastian Hahn for the original patch.
2021-01-10 15:29:02 +01:00
Ondrej Zajicek (work)
17663b6a7c RPKI: Remove port (and SSH username) from 'Cache server' output line
It was mixed-up if hostname is IPv6 address, and reporting separate
values (like port) on separate lines fits better into key-value style
of 'show protocols all' output. Also, the patch simplifies transport
identification formatting (although it is unused now).

Thanks to Alarig Le Lay for the suggestion.
2021-01-07 06:04:31 +01:00
Ondrej Zajicek (work)
4155104c90 BGP: Deprecate 'missing lladdr' option
The option is not implemented since transition to 2.0 and no plan to add it.
Also remove some deprecated RTS_* valus from documentation.

Thanks to Sébastien Parisot for notification.
2021-01-06 14:44:23 +01:00
Ondrej Zajicek (work)
ea3c6c1a15 Static: Fix handling of 'net' attribute in per-route filters
We need to define 'net' field temporarily as it may be accessed by
per-route filters.

Thanks to Damian Zaremba for the bugreport.
2020-12-28 21:19:27 +01:00
Ondrej Zajicek (work)
61dae32b29 Nest: Per-channel debug flags
The patch add support for per-channel debug flags, currently just
'states', 'routes', and 'filters'. Flag 'states' is used for channel
state changes, remaining two for routes passed through the channel.
The per-protocol debug flags 'routes'/'filters' still enable reporting
of routes for all channels, to keep existing behavior.

The patch causes minor changes in some log messages.
2020-12-07 22:19:40 +01:00
Ondrej Zajicek (work)
2465867712 BGP: Zero the newly allocated bucket structure
This fixes an issue with dirty node passed to add_tail().

Thanks to Andreas Rammhold for the initial patch.
2020-11-25 15:48:22 +01:00
Ondrej Zajicek (work)
1678bc0746 Fix some failed asserts due to add_tail()
When config structures are copied due to template application,
we need to reset list node structure before calling add_tail().

Thanks to Mikael Magnusson for patches.
2020-11-24 03:42:23 +01:00
Ondrej Zajicek (work)
c9ae81656f Some minor sl_allocz() cleanups 2020-11-24 03:21:44 +01:00
Toke Høiland-Jørgensen
db2d29073a lib/slab: introduce sl_allocz() function and use it in Babel
The babel protocol code was initialising objects returned from the slab
allocator by assigning to each of the struct members individually, but
wasn't touching the NODE member while doing so. This leads to warnings on
debug builds since commit:

baac700906 ("List expensive check.")

To fix this, introduce an sl_allocz() variant of the slab allocator which
will zero out the memory before returning it, and switch all the babel call
sites to use this version. The overhead for doing this should be negligible
for small objects, and in the case of babel, the largest object being
allocated was being zeroed anyway, so we can drop the memset in
babel_read_tlv().
2020-11-24 02:36:31 +01:00