Commit graph

45 commits

Author SHA1 Message Date
Ondrej Zajicek
52a43ae3b7 Minor changes in addresses.
Mainly changes IA_UNNUMBERED to IA_PEER and adds IA_HOST. Also do not
show broadcast addr in show interfaces. Nobody cares for that.
2011-03-28 22:46:18 +02:00
Ondrej Zajicek
01427d3f2b Remove some runaway debug messages and typos. 2010-11-19 18:03:27 +01:00
Ondrej Zajicek
fe181e7c63 Adds support for iface link check to static protocol. 2010-11-11 12:24:27 +01:00
Ondrej Zajicek
f25cb0ef9f Implements link state detection.
Also changes some symbol names (IFF_ADMIN_DOWN -> IFF_SHUTDOWN,
IFF_LINK_UP -> IFF_ADMIN_UP).
2010-11-11 10:03:02 +01:00
Ondrej Zajicek
0aad2b9292 Temporary OSPF commit - sockets. 2010-03-14 16:36:59 +01:00
Ondrej Zajicek
54305181f6 Merge branch 'new' into socket2 2010-03-11 18:55:59 +01:00
Ondrej Zajicek
e7b76b9760 Temoporary OSPF commit - socket changes. 2010-03-11 18:07:24 +01:00
Ondrej Zajicek
53434e44a9 Better flushing of interfaces.
When device protocol goes down, interfaces should be flushed
asynchronously (in the same way like routes from protocols are flushed),
when protocol goes to DOWN/HUNGRY.

This fixes the problem with static routes staying in kernel routing
table after BIRD shutdown.
2010-02-27 16:00:07 +01:00
Ondrej Zajicek
ff2857b03d Many changes in (mainly) kernel syncers.
- BSD kernel syncer is now self-conscious and can learn alien routes
- important bugfix in BSD kernel syncer (crash after protocol restart)
- many minor changes and bugfixes in kernel syncers and neighbor cache
- direct protocol does not generate host and link local routes
- min_scope check is removed, all routes have SCOPE_UNIVERSE by default
- also fixes some remaining compiler warnings
2010-02-26 10:55:58 +01:00
Ondrej Zajicek
be86240662 Temporary OSPFv3 development commit.
Finally, it is working.
2009-09-08 13:45:02 +02:00
Ondrej Zajicek
874b868544 Implements primary address selection base on 'primary' option. 2009-05-29 22:49:30 +02:00
Ondrej Zajicek
20e94fb85b A change in OSPF and RIP interface patterns.
Allows to add more interface patterns to one common 'options'
section like:

interface "eth3", "eth4" { options common to eth3 and eth4 };

Also removes undocumented and unnecessary ability to specify
more interface patterns with different 'options' sections:

interface "eth3" { options ... }, "eth4" { options ... };
2009-05-06 22:02:45 +02:00
Martin Mares
cf318e3cd3 Removed comments about workings of the old neighbor cache which are
(1) obsolete and (2) replaced by the progdoc.
2000-06-01 16:17:29 +00:00
Martin Mares
0f32f2a65a Modified the neighbor cache to remember local addresses as well.
neighbor->scope now contains proper address scope which is zero (SCOPE_HOST)
for local addresses, higher (SCOPE_LINK, ..., SCOPE_UNIVERSE) for remote ones.
2000-06-01 12:58:04 +00:00
Martin Mares
200accf396 if_connected() is again private.
Introduced neigh_connected_to() to serve the same purpose efficiently.
2000-03-27 12:16:37 +00:00
Pavel Machek
6480dd0880 I broke compilation. Sorry. 2000-03-26 21:31:57 +00:00
Pavel Machek
697711be2c if_connected is usefull outside of neighbour cache. 2000-03-26 18:00:45 +00:00
Martin Mares
85053fce04 Reimplemented neighbor cache. Now uses real hashing. 2000-03-01 14:51:47 +00:00
Martin Mares
6a636392d3 Rewrote interface type detection logic. The `unnumbered' flag is now per
address, not per interface (hence it's ifa->flags & IA_UNNUMBERED) and
should be set reliably. IF_MULTIACCESS should be fixed now, but it isn't
wise to rely on it on interfaces configured with /30 prefix.
2000-02-29 23:19:52 +00:00
Martin Mares
f5ad9f87a3 Killed a couple of bugs in the neighbor cache.
Manual disable/enable/restart/shutdown/reconfiguration of protocols
no longer hangs on loops in neighbor lists :)
2000-01-19 11:52:32 +00:00
Martin Mares
476e108425 Minor cleanups. 1999-12-16 13:51:43 +00:00
Martin Mares
5954dcfab7 Introduced new protocol-dependent integer field `aux' to struct neighbor. 1999-12-01 11:59:24 +00:00
Martin Mares
ae97b946e9 Added few basic commands: show status, show interfaces [summary],
show protocols (incomplete).
1999-11-25 15:35:30 +00:00
Martin Mares
8edf2361f9 Cleaned up handling of interface patterns:
o  Parsing of interface patterns moved to generic code,
      introduced this_ipatt which works similarly to this_iface.
   o  Interface patterns now support selection by both interface
      names and primary IP addresses.
   o  Proto `direct' updated.
   o  RIP updated as well, it also seems the memory corruption
      bug there is gone.
1999-08-03 19:30:49 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
e35ef181a4 o The if_change_too_big_p change was too high-spirited. Fixed.
o  Introduced if_find_by_index()
o  Recognizing two types of interface updates: full update (starting with
   if_start_update(), ending with if_end_update(), guaranteed to see
   all existing interfaces) and a partial update (only if_update(),
   usually due to asynchronous interface notifications).
1999-03-02 18:36:09 +00:00
Martin Mares
bcbd8cc3be Interface logic changes:
o  Introduced IF_LINK_UP flag corresponding to real link state.
o  Allowed addressless interfaces.
o  IF_UP is now automatically calculated and set iff the interface
   is administratively up, has link up and has an IP address assigned.
   It may be IF_IGNORED, though (as in case of the loopback).
o  Any changes which include up/down transition are considered small
   enough to not provoke artificial upping and downing of the interface.
o  When an interface disappears (i.e., it wasn't seen in the last scan),
   we announce this change only once.
o  IF_LOOPBACK implies IF_IGNORE.
1999-03-02 17:28:06 +00:00
Martin Mares
783f8b689a When protocols go down, prune the neighbor list. 1999-02-13 20:55:08 +00:00
Martin Mares
4e9498cbb1 config->router_id works again. 1999-02-13 18:42:00 +00:00
Martin Mares
31b3e1bbf5 Implemented new configuration/reconfiguration interface and defined protocol
state machines. Full explanation will follow soon.
1999-02-05 21:37:34 +00:00
Pavel Machek
77cedad1f6 Keep protocol data out of iface_patt. 1999-01-12 16:41:34 +00:00
Pavel Machek
2d9290e973 Rip now has configurable per-interface metric (please rewiev), and few
more configurable parameters. To do that, union was added into iface_patt.
1998-12-04 11:45:51 +00:00
Martin Mares
ed45f2e126 Added functions for manipulating interface name pattern lists:
o  iface_patt_match(list, iface) -- match interface against list
   o  iface_patts_equal(a, b, c) -- compare whether two pattern lists are
      equal or not. c(x,y) is called for comparison of protocol-dependent
      data.
1998-11-29 22:01:03 +00:00
Martin Mares
7d83290780 Generate router_id automatically if possible (standard "smallest of local
regular interface addresses" rule).

Protocols should NOT rely on router_id existence -- when router ID is not
available, the router_id variable is set to zero and protocols requiring
valid router ID should just refuse to start, reporting such error to the log.
1998-10-19 18:13:36 +00:00
Martin Mares
2a900b1b15 Fixed misleading comment. 1998-10-17 11:26:28 +00:00
Martin Mares
47b793064c Solve chicken-and-egg problems with protocol startup. We now queue all inactive
protocols and don't send route/interface updates to them and when they come up,
we resend the whole route/interface tables privately.

Removed the "scan interface list after protocol start" work-around.
1998-10-17 11:05:18 +00:00
Martin Mares
620a355a15 Now sending IF_CHANGE_CREATE when a new interface appears and IF_CHANGE_UP
only if it's really up.
1998-06-04 20:30:11 +00:00
Martin Mares
4cc78c5082 - Rewrote whole interface logic. Removed support for multiple addresses per
interface since it makes much trouble everywhere. Instead, we understand
  secondary addresses as subinterfaces.

- In case interface addresses or basic flags change, we simply convert it
  to a down/up sequence.

- Implemented the universal neighbour cache. (Just forget what did previous
  includes say of neighbour caching, this one is brand new.)
1998-06-01 21:41:11 +00:00
Martin Mares
8a48ecb8b1 Implemented scanning of network interfaces. Mostly very ugly code due to
terrible kernel interface (SIOGIFCONF and friends).
1998-05-26 21:42:05 +00:00
Martin Mares
b53499cdaa Added interface index (used only by OS-dependent code since ifindexes itself
are OS-dependent).
1998-05-24 14:48:09 +00:00
Martin Mares
235562ca5a Point-to-point links: added address of the opposite end. 1998-05-24 09:20:59 +00:00
Martin Mares
a8b6038225 Next attempt on data structures... 1998-05-03 16:42:45 +00:00
Martin Mares
1feea03e74 Changed #include <x/y> to #include "x/y" for our local includes, so that
gcc -MM can be used to separate them from the system ones.

Added automatic generation of dependencies.
1998-04-28 14:39:34 +00:00
Martin Mares
c40e05a0df Added IP address manipulation macros, interface declarations and logging. 1998-04-23 14:01:15 +00:00
Martin Mares
58ef912c6b First look at data structures. More to come tomorrow... 1998-04-22 12:58:34 +00:00