Commit graph

407 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
c1632ad0f3 OSPF: Fix handling of unnumbered PtPs
This issue has a long history. In 2012, we changed data field for
unnumbered PtP links from iface id (specified by RFC) to IP address based
on reports of bugs in Quagga that required it, and we used out-of-band
information to distinquish unnumberred PtPs with the same local IP
address.

Then with OSPF graceful restart implementation, we found that we can no
longer use out-of-band information, and we need to use only LSAdb info
for routing table calculation, but i forgot to finish handling of this
case, so multiple unnumbered PtPs with the same local IP addresses were
broken.

Considering that even recent Mikrotik RouterOS has broken next hop
calculation that depends on IP address in PtP link data field, we
cannot just switch back to the iface id for unnumbered PtP links.

The patch makes two changes: First, it goes back to use out-of-band
(position) info for distinguishing local interfaces in SPF when graceful
restart is not enabled, while still uses LSAdb-only approach for SPF
calculation when graceful restart is enabled.

Second, it adds OSPF interface option 'ptp address', which controls
whether IP address or iface id is used in data field. It is enabled
by default except for unnumbered PtP links with enabled graceful
restart.

Thanks to Kenth Eriksson for the bugreport and Joakim Tjernlund for
suggestions.
2020-05-26 18:21:43 +02:00
Ondrej Zajicek (work)
1ca7665fa4 Nest: Allow key id 0
There is nothing in RFCs specifying that id 0 is not allowed. Some
implementations does not support it, while some other use key id 0 by
default. We allow it but start with key id 1 by default.

Thanks to Kenth Eriksson for the bugreport.
2020-05-19 02:50:47 +02:00
Ondrej Zajicek (work)
b729e731f9 RIP: Triggered RIP (demand circuit) documentation 2020-05-19 02:42:22 +02:00
Ondrej Zajicek (work)
ec430a7fee Nest: Implement BGP path mask loop operator
Implement regex-like '+' operator in BGP path masks to match previous
path mask item multiple times. This is useful as ASNs may appear
multiple times in paths due to path prepending for traffic engineering
purposes.
2020-05-18 16:25:08 +02:00
Ondrej Zajicek (work)
82bfee76f0 Filter: Remove quitbird command
No need for this debug filter command and it can be abused from CLI.
2020-05-02 02:47:18 +02:00
Ondrej Zajicek (work)
a109056145 Doc: Update prefix set comment 2020-04-08 13:11:51 +02:00
Ondrej Zajicek (work)
7f9adafc10 BFD: Option to specify which class of BFD sessions are accepted
Allows to configure IPv4/IPv6-only or direct/multihop-only BFD protocol
instances.
2020-01-28 18:07:25 +01:00
Ondrej Zajicek (work)
3232d17186 Doc: Fix documentation of BGP gateway option
Thanks to Nico Schottelius for the bugreport.
2019-12-16 18:08:40 +01:00
Ondrej Zajicek (work)
ff2ca10cba Filter: Add support for src/dst accessors for Flowspec and SADR 2019-12-09 04:23:01 +01:00
Ondrej Zajicek (work)
0b228fca04 BGP: Add option to enforce first AS in AS_PATH
This is optional check described in RFC 4271. Although this can be also
done by filters, it is widely implemented option in BGP implementations.

Thanks to Eugene Bogomazov for the original patch.
2019-11-10 02:06:07 +01:00
Ondrej Zajicek (work)
becda5638a Doc: Minor fix 2019-11-05 16:29:47 +01:00
Ondrej Zajicek (work)
d54a69ac7f Doc: Add documentation for BGP option 'allow as sets' 2019-11-05 16:00:25 +01:00
Ondrej Zajicek (work)
be7c1aef42 BGP: RFC 8654 got released 2019-10-26 01:32:24 +02:00
Ondrej Zajicek (work)
eeb2c61653 Doc: Minor documentation fixes
Thanks to Christoph for the bugreport.
2019-10-10 22:43:41 +02:00
Ondrej Zajicek (work)
09ee846d92 BGP: AIGP metric support (RFC 7311) 2019-10-09 17:53:23 +02:00
Ondrej Zajicek
15a7583787 Doc: Fix duplicated lines
Thanks to elados93 for the patch.
2019-10-08 14:20:25 +02:00
Ondrej Zajicek (work)
532471967e Doc: Update BGP mask documentation 2019-09-10 17:28:06 +02:00
Ondrej Zajicek (work)
b7d7599ce3 BGP: implement Adj-RIB-Out
The patch implements optional internal export table to a channel and
hooks it to BGP so it can be used as Adj-RIB-Out. When enabled, all
exported (post-filtered) routes are stored there. An export table can be
examined using e.g. 'show route export table bgp1.ipv4'.
2019-08-14 06:02:33 +02:00
Ondrej Zajicek (work)
70a4320bdd RAdv: Allow solicited RAs to be sent as unicast
Add option to send solicited router advertisements as unicast directly
to soliciting nodes instead of as multicast to all-nodes group.
2019-08-12 00:43:19 +02:00
Ondrej Zajicek (work)
96e4d0960c Change 'graceful down' command to 'graceful restart' and update docs
The command initiating planned graceful restart including bird shutdown
should be called 'graceful restart' instead of 'graceful down', as the
later should be reserved for graceful shutdown in style of RFC 8326.
2019-07-31 19:45:29 +02:00
Ondrej Zajicek (work)
8c703ecf73 Doc: Update documentation about VRFs and BFD 2019-07-30 19:21:06 +02:00
Vincent Bernat
e840cb9cd5 Doc: Fix typo in BGP dynamic names feature description 2019-07-09 15:30:45 +02:00
Ondrej Zajicek (work)
6c0f85d5de Doc: OSPF graceful restart options 2019-06-30 22:11:29 +02:00
Ondrej Zajicek (work)
dbbe4a783b Doc: Dynamic BGP 2019-04-30 16:16:50 +02:00
Ondrej Filip
df092aa1de Small type in doc. 2019-04-24 13:49:18 +02:00
Ondrej Zajicek (work)
23ee6b1cd6 BGP: Promiscuous ASN mode
Allow to specify just 'internal' or 'external' for remote neighbor
instead of specific ASN. In the second case that means BGP peers with
any non-local ASNs are accepted.
2019-04-03 15:54:50 +02:00
Ondrej Zajicek (work)
3a22a6e858 Doc: Route attribute cleanups 2019-03-19 19:38:32 +01:00
Ondrej Zajicek (work)
3c3605818f BGP: Mandatory option for channels
Allow to mark channel to be mandatory, and do not allow BGP sessions if
no common AFI/SAFI is established.
2019-03-19 17:44:50 +01:00
Ondrej Zajicek (work)
ee95f281f0 Doc: Add documentation for OSPF retransmit delay option
Thanks to Igor Podlesny for notification.
2019-01-26 21:02:35 +01:00
Ondrej Zajicek (work)
1c730ee761 Doc: Remove doc for already removed option 2019-01-26 20:44:37 +01:00
Maria Matějka
82b742533b Perf: Protocol to measure BIRD performance internally
This protocol is highly experimental and nobody should use it in
production. Anyway it may help you getting some insight into what eats
so much time in filter processing.
2018-12-18 15:08:31 +01:00
Ondrej Zajicek (work)
1cab2b4a7c BGP: Extend 'next hop keep' and 'next hop self' options
Extend 'next hop keep' and 'next hop self' options to have boolean values
(enabled / disabled) and also values 'ibgp'/ 'ebgp' to restrict it to
routes received from IBGP / EBGP. This allows to have it enabled by
default in some cases, matches features of other implementations, and
allows to handle some strange cases like EBGP border router with 'next
hop self' also doing IBGP route reflecting.

Change default of 'next hop keep' to enabled for route servers, and
'ibgp' for route reflectors.

Update documentation for these options.
2018-12-16 23:44:24 +01:00
Ondrej Zajicek (work)
6b5ad2066a Doc: Document log rotation feature 2018-12-12 16:54:23 +01:00
Ondrej Zajicek (work)
9e92f357be Doc: Document BGP import table option 2018-12-12 16:04:15 +01:00
Jan Maria Matejka
9a5ef043c1 Merge branch 'mq-custom' into int-new 2018-12-06 09:55:34 +01:00
Maria Matejka
265419a369 Custom route attributes
For local route marking purposes, local custom route attributes may be
defined. These attributes are seamlessly stripped after export filter to
every real protocol like Kernel, BGP or OSPF, they however pass through
pipes. We currently allow at most 256 custom attributes.

This should be much faster than currently used bgp communities
for marking routes.
2018-12-06 09:55:21 +01:00
Ondrej Zajicek (work)
3fda08e405 Unix: Change debugging options
The old behavior was that enabling debugging did many nontrivial changes
in BIRD behavior. The patch changes it that these changes are generally
independent. Compiling with --enable-debug now just enables compile-time
debug macros, but do not automatically activate debug mode (-d) nor local
mode (-l). Debug mode with output to file (-D) do not force foreground
mode (-f), therefore there is no need for backgroud option (-b), which is
removed. Also fixes a bug when the default log target in -D mode was
stderr instead of given debug file.
2018-12-04 16:55:25 +01:00
Ondrej Zajicek (work)
fc1b933304 MRT documentation 2018-11-21 16:00:22 +01:00
Ondrej Zajicek (work)
f2d8e6801e Filter: Make ifname attribute modifiable
Allow to change an interface associated with a route by setting
ifname attribute. It will also change the route to a direct one.
2018-11-05 22:03:21 +01:00
Ondrej Zajicek (work)
a043f2d794 Doc: Fix description of 'description'
Thanks to Clemens Schrimpe for the bugreport.
2018-08-24 18:58:06 +02:00
Ondrej Zajicek (work)
765f400f6b DOC: Remove pipe mode reference
Pipe mode was removed in 2.0, remove reference to it in the documentation.

Thanks to Piotr Wydrych for the bugreport.
2018-08-21 15:24:55 +02:00
Ondrej Zajicek (work)
d33cf3f4c3 Doc: Fix notes related to obsolete option
Thanks to Julien Dessaux for the report.
2018-08-07 14:46:24 +02:00
Ondrej Zajicek (work)
5bd734317c BGP: Long-lived graceful restart
The patch implements long-lived graceful restart for BGP, namely
draft-uttaro-idr-bgp-persistence-03.
2018-07-31 18:40:38 +02:00
Ondrej Zajicek (work)
feae132e0f Do not initialize route metrics in import_control hook
During route export, the receiving protocol often initialized route
metrics to default value in its import_control hook before export filter
was executed. This is inconsistent with the expectation that an export
filter would process the same route as one in the routing table and it
breaks setting these metrics before (e.g. for static routes directly in
static protocol).

The patch removes the initialization of route metrics in import_control
hook, the default values are already handled in rt_notify hook called
after export filters.

The patch also changed the behavior of OSPF to keep metrics when a route
is reannounced between OSPF instances (to be consistent with other
protocols) and the behavior when both ospf_metric1 and ospf_metric2
are specified (to have more expected behavior).
2018-05-24 14:51:05 +02:00
Ondrej Zajicek (work)
70fab17837 Babel: Add option to randomize router ID
When a Babel node restarts, it loses its sequence number, which can cause
its routes to be rejected by peers until the state is cleared out by other
nodes in the network (which can take on the order of minutes).

There are two ways to fix this: Having stable storage to keep the sequence
number across restarts, or picking a different router ID each time.

This implements the latter, by introducing a new option that will cause
BIRD to randomize a high 32 bits of router ID every time it starts up.
This avoids the problem at the cost of not having stable router IDs in
the network.

Thanks to Toke Hoiland-Jorgensen for the patch.
2018-05-03 16:55:11 +02:00
Ondrej Zajicek (work)
c408d807a3 Doc: Documentation for BGP disable after cease option 2018-04-03 17:31:45 +02:00
Ondrej Zajicek (work)
a63d20aa87 Doc: Documentation for BGP extended next hop feature
Thanks to Arvin Gan for the bugreport.
2018-04-03 16:53:58 +02:00
Ondrej Zajicek (work)
157f6c2aad Doc: Remove some superfluous slashes 2018-03-24 02:05:47 +01:00
Ondrej Zajicek (work)
a177e4dd04 Doc: Minor update 2018-03-21 16:33:08 +01:00
Ondrej Zajicek (work)
159d619caf Doc: SADR documentation 2018-03-17 22:25:06 +01:00