Commit graph

1988 commits

Author SHA1 Message Date
Ondrej Filip
67ff91302f Netmask checking for hello packets added. 1999-05-14 08:46:06 +00:00
Ondrej Filip
7426ee3d49 Checksum control added. 1999-05-13 09:18:36 +00:00
Ondrej Filip
296ecb56eb OSPF RX implementation starts.... 1999-05-11 15:34:33 +00:00
Pavel Machek
1b16029c12 Mensi updaty do ripu. Pridana passwd autentikace (netestovano). 1999-05-11 09:53:45 +00:00
Ondrej Filip
f7103dfcfe Better logging output. Added 'struct proto *' info 'struct ospf iface'. 1999-05-11 09:50:02 +00:00
Martin Mares
1a54d44a23 Added packet checksumming code. Watch the comments for an explanation. 1999-05-10 21:37:39 +00:00
Martin Mares
a2697f02ac Netlink support for secondary interface addresses. 1999-05-07 13:46:16 +00:00
Martin Mares
9a158361da I rewrote the interface handling code, so that it supports multiple
addresses per interface (needed for example for IPv6 support).

Visible changes:

o  struct iface now contains a list of all interface addresses (represented
   by struct ifa), iface->addr points to the primary address (if any).
o  Interface has IF_UP set iff it's up and it has a primary address.
o  IF_UP is now independent on IF_IGNORED (i.e., you need to test IF_IGNORED
   in the protocols; I've added this, but please check).
o  The if_notify_change hook has been simplified (only one interface pointer
   etc.).
o  Introduced a ifa_notify_change hook. (For now, only the Direct protocol
   does use it -- it's wise to just listen to device routes in all other
   protocols.)
o  Removed IF_CHANGE_FLAGS notifier flag (it was meaningless anyway).
o  Updated all the code except netlink (I'll look at it tomorrow) to match
   the new semantics (please look at your code to ensure I did it right).

Things to fix:

o  Netlink.
o  Make krt-iface interpret "eth0:1"-type aliases as secondary addresses.
1999-05-06 21:38:11 +00:00
Martin Mares
ec8b579e9c Recognize site scope for IPv4 addresses (prefixes reserved for private
networks).

Removed old #ifndef logic which was used to avoid IPv4/IPv6 clashes
before conditionals in Modules lists were introduced.
1999-04-27 16:03:17 +00:00
Ondrej Filip
59e2188cb7 Just changes of comments. 1999-04-27 13:04:33 +00:00
Ondrej Filip
6376a96133 Hello timer implemented. 1999-04-27 12:56:52 +00:00
Ondrej Filip
93bde8dce2 Work on hello continues. 1999-04-22 13:12:28 +00:00
Pavel Machek
36bbfc704c Updated filters: they now actually see IP/pxlen of net being filtered,
gateway, and who told us, so they can do usefull jobs from now on.
1999-04-19 18:41:56 +00:00
Pavel Machek
afbc41ab3d SImplify code a tiny bit. 1999-04-14 21:11:24 +00:00
Ondrej Filip
b11d8a4f59 Redesigned struct ospf_iface & new struct ospf_sock. 1999-04-14 15:13:44 +00:00
Ondrej Filip
b31568a516 Small bug fix in memcpy. 1999-04-14 12:47:18 +00:00
Martin Mares
4c5e5e3a1c Multicasts once again: When using SO_BINDTODEVICE, don't specify IP address
of the interface.
1999-04-14 12:29:47 +00:00
Martin Mares
1b50a1e4be Next attempt to get SO_BINDTODEVICE work :) 1999-04-14 11:39:07 +00:00
Martin Mares
36154beb70 Use SO_BINDTODEVICE if we're using old multicast API (i.e., struct ip_mreq
and not ip_mreqn). This should get multicasts on unnumbered PtP links work.
1999-04-14 11:21:02 +00:00
Martin Mares
9da4d14340 A couple of OSPF fixes:
o  ((flags & IF_CHANGE_UP) == IF_CHANGE_UP)   ->   (flags & IF_CHANGE_UP)
o  bcopy  ->  memcpy   (bcopy is unportable)
o  Ifdeffed out add_tail(&(ifa->sk_list),NODE mcsk) -- the node in socket
   structure is for internal use by the resource manager only. (Now, the
   debugging dump of open sockets looks sane :-)).
1999-04-14 11:09:55 +00:00
Martin Mares
1ab4dee028 Removed redeclaration of `idval', so that it compiles :) 1999-04-14 10:49:31 +00:00
Ondrej Filip
4c630a6dd7 Added wait timer for eligible BCAST & NBMA interface. 1999-04-13 21:46:20 +00:00
Ondrej Filip
55e7732a5a Change in ospf_iface. (My bad understanding of lists manipulation.) 1999-04-13 19:27:44 +00:00
Ondrej Filip
aec76c6e8e IPv6 changes. 1999-04-13 18:21:53 +00:00
Pavel Machek
43fc099b98 Sets of IP addresses should work, now. (From now on it is also
possible to write if 1.2.3.4 < 1.2.3.5, but I'm not sure if it is good
for anything.)
1999-04-13 11:40:04 +00:00
Ondrej Filip
24eaae9e5d Small change to stop using loopback. 1999-04-13 00:46:34 +00:00
Ondrej Filip
cb2e8c4970 A small init change to avoid core dump. 1999-04-13 00:24:05 +00:00
Ondrej Filip
5b1a92e6d4 Not all I mean serious. Almost everything will change.
Changes: struct ospf_iface draft, various constants added...
1999-04-12 23:54:21 +00:00
Martin Mares
2f5d154466 Added ipa_compare as requested. 1999-04-12 20:26:06 +00:00
Pavel Machek
38506f71b0 Sets of integers now actually work. Sets of IP will work as soon as
compare function is ready.
1999-04-12 19:58:18 +00:00
Martin Mares
01bd7759b2 Ignore alias interfaces (some day, we will treat them as pure secondary
interface addresses).
1999-04-12 18:07:05 +00:00
Martin Mares
08e2d6259a Removed TOS support. This simplifies many things a lot. 1999-04-12 18:01:07 +00:00
Martin Mares
170c984a9e Cosmetic message fix. 1999-04-12 17:27:21 +00:00
Martin Mares
113694892e Use $(CC) instead of gcc even when generating dependencies. 1999-04-12 17:21:11 +00:00
Martin Mares
620c4f90c9 Oops, a typo in previous struct ip_mreqn changes... 1999-04-12 17:20:50 +00:00
Martin Mares
61fb537c62 Use struct ip_mreqn' instead of struct ip_mreq' for multicast
operations on 2.1/2.2 kernels. This allows passing of real interface
indexes instead of referencing interfaces by their IP addresses which
fails badly in presence of unnumbered interfaces.

Unfortunately, this structure is not visible with glibc 2.0 as it provides
its own networking headers :-(  Both libc5 and glibc 2.1 should be OK.
1999-04-12 15:27:56 +00:00
Martin Mares
5a99ade413 Fixed a couple of bugs in handling of multicast sockets.
See comments in lib/socket.h for a detailed guide on how to use them.
1999-04-12 14:57:46 +00:00
Pavel Machek
bad631e048 Oops, typo. 1999-04-12 12:07:15 +00:00
Pavel Machek
8ba2cc064b In case no startup function is defined, don't try to launch it. 1999-04-12 12:01:59 +00:00
Martin Mares
ed9a82369f Added new target "tags" to generate a tag table for Emacs.
Also made "depend" work before the tree is compiled first time.
1999-04-11 19:28:16 +00:00
Pavel Machek
2db3b2887e Decrease number of warnings. 1999-04-10 09:45:08 +00:00
Martin Mares
49ed70b48e Portability fixes. 1999-04-07 14:25:56 +00:00
Pavel Machek
23b1539bf9 Filters upgraded - a bit. Moved code to filter.c because it is where
it belongs. (f-util.c stays there for auxiliary and non-important things.)
1999-04-07 12:11:08 +00:00
Martin Mares
7976a574b6 ip_pton: Avoid modification of the string we're converting. 1999-04-06 21:31:03 +00:00
Martin Mares
e2dc2f30ef Routing table core changes to support full route filtering:
o  Introduced rte_cow() which should be used for copying on write the
   rte's in filters. Each rte now carries a flag saying whether it's
   a real route (possessing table linkage and other insignia) or a local
   copy. This function can be expected to be fast since its fast-path
   is inlined.
o  Introduced rte_update_pool which is a linear memory pool used for
   all temporary data during rte_update. You should not reference it directly
   -- instead use a pool pointer passed to all related functions.
o  Split rte_update to three functions:

	rte_update	The front end: handles all checking, inbound
			filtering and calls rte_recalculate() for the
			final version of the route.
	rte_recalculate	Update the table according to already filtered route.
	rte_announce	Announce routing table changes to all protocols,
			passing them through export filters and so on.

   The interface has _not_ changed -- still call rte_update() and it will
   do the rest for you automagically.
o  Use new filtering semantics to be explained in a separate mail.
1999-04-05 20:25:03 +00:00
Martin Mares
9e0e485e50 Added some new protocol hooks (look at the comments for better explanation):
make_tmp_attrs		Convert inline attributes to ea_list
	store_tmp_attrs		Convert ea_list to inline attributes
	import_control		Pre-import decisions
1999-04-05 20:17:59 +00:00
Martin Mares
5056c559c4 Changed syntax of attaching filters to protocols to hopefully the final
version:

	EXPORT <filter-spec>	for outbound routes (i.e., those announced
				by BIRD to the rest of the world).
	IMPORT <filter-spec>	for inbound routes (i.e., those imported
				by BIRD from the rest of the world).

where <filter-spec> is one of:

	ALL			pass all routes
	NONE			drop all routes
	FILTER <name>		use named filter
	FILTER { <filter> }	use explicitly defined filter

For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
the kernel protocol, so that you need to add EXPORT ALL to get the previous
configuration of kernel syncer (as usually, see doc/bird.conf.example for
a bird.conf example :)).
1999-04-05 20:15:31 +00:00
Martin Mares
63a381dbf5 Several filter changes. (Pavel, please check if they are OK.)
o  Changed parameters of f_run. Changed rtein+rteout pair to rte pointer
      passed by reference, added ea_list of temporary attrs again passed
      by reference and finally added a pointer to memory pool for storing
      temporary data (new ea_lists's, temporary rta's etc.).
   o  Re-ordered result codes, so that all accepts come before all rejects.
   o  Introduced FILTER_ACCEPT and FILTER_REJECT dummy values (will be
      used in protocol configurations).
   o  Added filter_name() which returns name of a filter or ACCEPT/REJECT
      for the dummies.
1999-04-05 20:10:31 +00:00
Martin Mares
d4ff748224 Use a more reasonable pool chunk size: 4080 bytes seem to be a good
approximation of a integral fraction of page size even if both malloc
overhead and chunk header space is counted.
1999-04-05 20:06:02 +00:00
Martin Mares
c10421d3d4 More changes to the kernel syncer.
o  Now compatible with filtering.
o  Learning of kernel routes supported only on CONFIG_SELF_CONSCIOUS
   systems (on the others it's impossible to get it semantically correct).
o  Learning now stores all of its routes in a separate fib and selects
   the ones the kernel really uses for forwarding packets.
o  Better treatment of CONFIG_AUTO_ROUTES ports.
o  Lots of internal changes.
1999-04-03 13:05:18 +00:00