bird/doc/bird.conf.example
1999-12-08 12:51:15 +00:00

72 lines
1.5 KiB
Plaintext

/*
* This is an example configuration file.
*/
# Yet another comment
#log syslog { error };
#log "tmp" all;
#router id 62.168.0.1;
#define xyzzy = 120+10;
#filter sink { reject; }
#filter okay { accept; }
#table testable;
#protocol rip MyRIP_test {
# preference xyzzy;
# debug all;
# port 1520;
# period 7;
# garbagetime 60;
# interface "*" { mode broadcast; };
# honour neighbour;
# passwords { password "ahoj" from 0 to 10;
# password "nazdar" from 10;
# }
# authentication none;
# import filter { print "importing"; accept; };
# export filter { print "exporting"; accept; };
#}
protocol direct {
# disabled;
# interface "-eth*", "*";
}
protocol kernel {
# disabled;
# learn; # Learn all routes from the kernel
persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
# async off; # Netlink: Disable asynchronous events
# import none; # Default is import all
export all; # Default is export none
# kernel table 5; # Kernel table to synchronize with (default: main)
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol static {
# disabled;
# table testable;
# route 0.0.0.0/0 via 62.168.0.13;
# route 62.168.0.0/25 reject;
# route 10.0.0.0/8 reject;
# route 10.1.1.0:255.255.255.0 via 62.168.0.3;
# route 10.1.2.0:255.255.255.0 via 62.168.0.3;
# route 10.1.3.0:255.255.255.0 via 62.168.0.4;
# route 10.2.0.0/24 via "arc0";
}
#protocol pipe {
# peer table testable;
# import all;
# export all;
#}