bird/proto/babel/config.Y
Ondrej Zajicek (work) c26c6bc2d7 Show info from multiple protocols when protocol is not specified
Most commands like 'show ospf neighbors' fail when protocol is not
specified and there are multiple instances of given protocol type.
This is annoying in BIRD 2, as many protocols have IPv4 and IPv6
instances. The patch changes that by showing output from all protocol
instances of appropriate type.

Note that the patch also removes terminating cli_msg() call from these
commands and moves it to the common iterating code.
2020-06-28 15:38:47 +02:00

146 lines
5 KiB
Text

/*
* BIRD -- Babel Configuration
*
* Copyright (c) 2015-2016 Toke Hoiland-Jorgensen
* (c) 2016--2017 Ondrej Zajicek <santiago@crfreenet.org>
* (c) 2016--2017 CZ.NIC z.s.p.o.
*
* Can be freely distributed and used under the terms of the GNU GPL.
*/
CF_HDR
#include "proto/babel/babel.h"
#include "nest/iface.h"
CF_DEFINES
#define BABEL_CFG ((struct babel_config *) this_proto)
#define BABEL_IFACE ((struct babel_iface_config *) this_ipatt)
CF_DECLS
CF_KEYWORDS(BABEL, INTERFACE, METRIC, RXCOST, HELLO, UPDATE, INTERVAL, PORT,
TYPE, WIRED, WIRELESS, RX, TX, BUFFER, PRIORITY, LENGTH, CHECK, LINK,
NEXT, HOP, IPV4, IPV6, BABEL_METRIC, SHOW, INTERFACES, NEIGHBORS,
ENTRIES, RANDOMIZE, ROUTER, ID)
CF_GRAMMAR
proto: babel_proto ;
babel_proto_start: proto_start BABEL
{
this_proto = proto_config_new(&proto_babel, $1);
init_list(&BABEL_CFG->iface_list);
BABEL_CFG->hold_time = 1 S_;
};
babel_proto_item:
proto_item
| proto_channel
| INTERFACE babel_iface
| RANDOMIZE ROUTER ID bool { BABEL_CFG->randomize_router_id = $4; }
;
babel_proto_opts:
/* empty */
| babel_proto_opts babel_proto_item ';'
;
babel_proto:
babel_proto_start proto_name '{' babel_proto_opts '}';
babel_iface_start:
{
this_ipatt = cfg_allocz(sizeof(struct babel_iface_config));
add_tail(&BABEL_CFG->iface_list, NODE this_ipatt);
init_list(&this_ipatt->ipn_list);
BABEL_IFACE->port = BABEL_PORT;
BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRED;
BABEL_IFACE->limit = BABEL_HELLO_LIMIT;
BABEL_IFACE->tx_tos = IP_PREC_INTERNET_CONTROL;
BABEL_IFACE->tx_priority = sk_priority_control;
BABEL_IFACE->check_link = 1;
};
babel_iface_finish:
{
if (BABEL_IFACE->type == BABEL_IFACE_TYPE_WIRELESS)
{
if (!BABEL_IFACE->hello_interval)
BABEL_IFACE->hello_interval = BABEL_HELLO_INTERVAL_WIRELESS;
if (!BABEL_IFACE->rxcost)
BABEL_IFACE->rxcost = BABEL_RXCOST_WIRELESS;
}
else
{
if (!BABEL_IFACE->hello_interval)
BABEL_IFACE->hello_interval = BABEL_HELLO_INTERVAL_WIRED;
if (!BABEL_IFACE->rxcost)
BABEL_IFACE->rxcost = BABEL_RXCOST_WIRED;
}
/* Make sure we do not overflow the 16-bit centisec fields */
if (!BABEL_IFACE->update_interval)
BABEL_IFACE->update_interval = MIN_(BABEL_IFACE->hello_interval*BABEL_UPDATE_INTERVAL_FACTOR, BABEL_MAX_INTERVAL);
BABEL_IFACE->ihu_interval = MIN_(BABEL_IFACE->hello_interval*BABEL_IHU_INTERVAL_FACTOR, BABEL_MAX_INTERVAL);
BABEL_CFG->hold_time = MAX_(BABEL_CFG->hold_time, BABEL_IFACE->update_interval*BABEL_HOLD_TIME_FACTOR);
};
babel_iface_item:
| PORT expr { BABEL_IFACE->port = $2; if (($2<1) || ($2>65535)) cf_error("Invalid port number"); }
| RXCOST expr { BABEL_IFACE->rxcost = $2; if (($2<1) || ($2>65535)) cf_error("Invalid rxcost"); }
| LIMIT expr { BABEL_IFACE->limit = $2; if (($2<1) || ($2>16)) cf_error("Limit must be in range 1-16"); }
| TYPE WIRED { BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRED; }
| TYPE WIRELESS { BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRELESS; }
| HELLO INTERVAL expr_us { BABEL_IFACE->hello_interval = $3; if (($3<BABEL_MIN_INTERVAL) || ($3>BABEL_MAX_INTERVAL)) cf_error("Hello interval must be in range 10 ms - 655 s"); }
| UPDATE INTERVAL expr_us { BABEL_IFACE->update_interval = $3; if (($3<BABEL_MIN_INTERVAL) || ($3>BABEL_MAX_INTERVAL)) cf_error("Update interval must be in range 10 ms - 655 s"); }
| RX BUFFER expr { BABEL_IFACE->rx_buffer = $3; if (($3<256) || ($3>65535)) cf_error("RX buffer must be in range 256-65535"); }
| TX LENGTH expr { BABEL_IFACE->tx_length = $3; if (($3<256) || ($3>65535)) cf_error("TX length must be in range 256-65535"); }
| TX tos { BABEL_IFACE->tx_tos = $2; }
| TX PRIORITY expr { BABEL_IFACE->tx_priority = $3; }
| CHECK LINK bool { BABEL_IFACE->check_link = $3; }
| NEXT HOP IPV4 ipa { BABEL_IFACE->next_hop_ip4 = $4; if (!ipa_is_ip4($4)) cf_error("Must be an IPv4 address"); }
| NEXT HOP IPV6 ipa { BABEL_IFACE->next_hop_ip6 = $4; if (!ipa_is_ip6($4)) cf_error("Must be an IPv6 address"); }
;
babel_iface_opts:
/* empty */
| babel_iface_opts babel_iface_item ';'
;
babel_iface_opt_list:
/* empty */
| '{' babel_iface_opts '}'
;
babel_iface:
babel_iface_start iface_patt_list_nopx babel_iface_opt_list babel_iface_finish;
dynamic_attr: BABEL_METRIC { $$ = f_new_dynamic_attr(EAF_TYPE_INT, T_INT, EA_BABEL_METRIC); } ;
CF_CLI_HELP(SHOW BABEL, ..., [[Show information about Babel protocol]]);
CF_CLI(SHOW BABEL INTERFACES, optproto opttext, [<name>] [\"<interface>\"], [[Show information about Babel interfaces]])
{ PROTO_WALK_CMD($4, &proto_babel, p) babel_show_interfaces(p, $5); };
CF_CLI(SHOW BABEL NEIGHBORS, optproto opttext, [<name>] [\"<interface>\"], [[Show information about Babel neighbors]])
{ PROTO_WALK_CMD($4, &proto_babel, p) babel_show_neighbors(p, $5); };
CF_CLI(SHOW BABEL ENTRIES, optproto opttext, [<name>], [[Show information about Babel prefix entries]])
{ PROTO_WALK_CMD($4, &proto_babel, p) babel_show_entries(p); };
CF_CLI(SHOW BABEL ROUTES, optproto opttext, [<name>], [[Show information about Babel route entries]])
{ PROTO_WALK_CMD($4, &proto_babel, p) babel_show_routes(p); };
CF_CODE
CF_END