8e66a0ebb9
o Interface syncing is now a part of krt and it can have configurable
parameters. Actually, the only one is scan rate now :)
o Kernel routing table syncing is now synchronized with interface
syncing (we need the most recent version of the interface list
to prevent lots of routes to non-existent destinations from
appearing). Instead of its own timer, we just check if it's
route scan time after each iface list scan.
o Syncing of device routes implemented.
o CONFIG_AUTO_ROUTES should control syncing of automatic device routes.
o Rewrote krt_remove_route() to really remove routes :)
o Better diagnostics.
o Fixed a couple of bugs.
38 lines
713 B
Plaintext
38 lines
713 B
Plaintext
/*
|
|
* This is an example configuration file.
|
|
*/
|
|
|
|
# Yet another comment
|
|
|
|
router id 62.168.0.1
|
|
|
|
define xyzzy = 120+10
|
|
|
|
#protocol rip MyRIP_test {
|
|
# preference xyzzy
|
|
# debug all
|
|
#}
|
|
|
|
protocol device {
|
|
# disabled
|
|
# interface "-eth*", "*"
|
|
}
|
|
|
|
protocol kernel {
|
|
# disabled
|
|
# learn; # Learn all routes from the kernel
|
|
scan time 10; # Scan kernel tables every 10 seconds
|
|
# route scan time 20; # But routes only every 20 seconds
|
|
}
|
|
|
|
protocol static {
|
|
# disabled
|
|
route 0.0.0.0/0 via 62.168.0.13
|
|
route 62.168.0.0/25 reject
|
|
# route 10.0.0.0/8 reject
|
|
# route 10.1.1.0:255.255.255.0 via 62.168.0.3
|
|
# route 10.1.2.0:255.255.255.0 via 62.168.0.3
|
|
# route 10.1.3.0:255.255.255.0 via 62.168.0.4
|
|
# route 10.2.0.0/24 via "arc0"
|
|
}
|