bird/proto/ospf/ospf.h
Ondrej Filip 1508757478 Preparing for building LS databaze. Huh, why is it so complicated? :-(
Adding definition of some constants.
2000-01-05 00:03:47 +00:00

238 lines
6.4 KiB
C

/*
* BIRD -- OSPF
*
* (c) 1999 Ondrej Filip <feela@network.cz>
*
* Can be freely distributed and used under the terms of the GNU GPL.
*/
#ifndef _BIRD_OSPF_H_
#define _BIRD_OSPF_H_
#define LOCAL_DEBUG
#define IAMMASTER(x) ((x) & DBDES_MS)
#define INISET(x) ((x) & DBDES_I)
#include <string.h>
#include "nest/bird.h"
#include "lib/checksum.h"
#include "lib/ip.h"
#include "lib/lists.h"
#include "lib/socket.h"
#include "lib/timer.h"
#include "lib/resource.h"
#include "nest/protocol.h"
#include "nest/iface.h"
#include "nest/route.h"
#include "conf/conf.h"
#define OSPF_PROTO 89
#ifndef IPV6
#define OSPF_VERSION 2
#define AllSPFRouters ipa_from_u32(0xe0000005) /* 224.0.0.5 */
#define AllDRouters ipa_from_u32(0xe0000006) /* 224.0.0.6 */
#else
#error Multicast address not defined in IPv6
#endif
#define LSREFRESHTIME 1800 /* 30 minut */
#define MINLSINTERVAL 5
#define MINLSARRIVAL 1
#define MAXAGE 3600 /* 1 hour */
#define CHECKAGE 300 /* 5 min */
#define MAXAGEDIFF 900 /* 15 min */
#define LSINFINITY 0xffffff
/*#define DEFAULTDES 0.0.0.0 FIXME: How to define it? */
#define INITSEQNUM 0x80000001 /* Initial Sequence Number */
#define MAXSEQNUM 0x7fffffff /* Maximal Sequence Number */
struct ospf_config {
struct proto_config c;
u32 area; /* FIXME: Area ID !!! This is wrong !!!
* Should respect interface */
};
struct ospf_iface {
node n;
struct proto_ospf *proto;
struct iface *iface; /* Nest's iface */
sock *hello_sk; /* Hello socket */
sock *ip_sk; /* IP socket (for DD ...) */
list neigh_list; /* List of neigbours */
u32 area; /* OSPF Area */
u16 cost; /* Cost of iface */
u16 rxmtint; /* number of seconds between LSA retransmissions */
u16 iftransdelay; /* The estimated number of seconds it takes to
transmit a Link State Update Packet over this
interface. LSAs contained in the update */
u8 priority; /* A router priority for DR election */
u16 helloint; /* number of seconds between hello sending */
u16 waitint; /* number of sec before changing state from wait */
u32 deadc; /* after "deadint" missing hellos is router dead */
u16 autype;
u8 aukey[8];
u8 options;
ip_addr drip; /* Designated router */
u32 drid;
ip_addr bdrip; /* Backup DR */
u32 bdrid;
u8 type; /* OSPF view of type */
#define OSPF_IT_BCAST 0
#define OSPF_IT_NBMA 1
#define OSPF_IT_PTP 2
#define OSPF_IT_VLINK 3
u8 state; /* Interface state machine */
#define OSPF_IS_DOWN 0 /* Not working */
#define OSPF_IS_LOOP 1 /* Should never happen */
#define OSPF_IS_WAITING 2 /* Waiting for Wait timer */
#define OSPF_IS_PTP 3 /* PTP operational */
#define OSPF_IS_DROTHER 4 /* I'm on BCAST or NBMA and I'm not DR */
#define OSPF_IS_BACKUP 5 /* I'm BDR */
#define OSPF_IS_DR 6 /* I'm DR */
timer *wait_timer; /* WAIT timer */
timer *hello_timer; /* HELLOINT timer */
timer *rxmt_timer; /* RXMT timer */
/* Default values for interface parameters */
#define COST_D 10
#define RXMTINT_D 5
#define IFTRANSDELAY_D 1
#define PRIORITY_D 1
#define HELLOINT_D 10
#define DEADC_D 4
#define WAIT_DMH 3 /* Value of Wait timer - not found it in RFC
* - using 3*HELLO
*/
};
struct ospf_packet {
u8 version;
u8 type;
#define HELLO 1 /* Hello */
#define DBDES 2 /* Database description */
#define LSREQ 3 /* Link state request */
#define LSUPD 4 /* Link state update */
#define LSACK 5 /* Link state acknowledgement */
u16 length;
u32 routerid;
u32 areaid;
u16 checksum;
u16 autype;
u8 authetication[8];
};
struct ospf_hello_packet {
struct ospf_packet ospf_packet;
ip_addr netmask;
u16 helloint;
u8 options;
u8 priority;
u32 deadint;
u32 dr;
u32 bdr;
};
struct ospf_dbdes_packet {
struct ospf_packet ospf_packet;
u16 iface_mtu;
u8 options;
u8 imms; /* I, M, MS bits */
#define DBDES_MS 1
#define DBDES_M 2
#define DBDES_I 4
u32 ddseq;
};
struct ospf_lsaheader {
u16 lsage; /* LS Age */
u8 options;
u8 lstype;
u32 lsid;
u32 advr; /* Advertising router */
u32 lssn; /* LS Sequence number */
u16 checksum;
u16 length;
};
struct ospf_neighbor
{
node n;
struct ospf_iface *ifa;
u8 state;
#define NEIGHBOR_DOWN 0
#define NEIGHBOR_ATTEMPT 1
#define NEIGHBOR_INIT 2
#define NEIGHBOR_2WAY 3
#define NEIGHBOR_EXSTART 4
#define NEIGHBOR_EXCHANGE 5
#define NEIGHBOR_LOADING 6
#define NEIGHBOR_FULL 7
timer *inactim; /* Inactivity timer */
u8 imms; /* I, M, Master/slave received */
u32 dds; /* DD Sequence number being sent */
u32 ddr; /* last Dat Des packet received */
u8 myimms; /* I, M Master/slave */
u32 rid; /* Router ID */
ip_addr ip; /* IP of it's interface */
u8 priority; /* Priority */
u8 options; /* Options received */
u32 dr; /* Neigbour's idea of DR */
u32 bdr; /* Neigbour's idea of BDR */
u8 adj; /* built adjacency? */
};
/* Definitions for interface state machine */
#define ISM_UP 0 /* Interface Up */
#define ISM_WAITF 1 /* Wait timer fired */
#define ISM_BACKS 2 /* Backup seen */
#define ISM_NEICH 3 /* Neighbor change */
#define ISM_LOOP 4 /* Loop indicated */
#define ISM_UNLOOP 5 /* Unloop indicated */
#define ISM_DOWN 6 /* Interface down */
/* Definitions for neighbor state machine */
#define INM_HELLOREC 0 /* Hello Received */
#define INM_START 1 /* Neighbor start - for NBMA */
#define INM_2WAYREC 2 /* 2-Way received */
#define INM_NEGDONE 3 /* Negotiation done */
#define INM_EXDONE 4 /* Exchange done */
#define INM_BADLSREQ 5 /* Bad LS Request */
#define INM_LOADDONE 6 /* Load done */
#define INM_ADJOK 7 /* AdjOK? */
#define INM_SEQMIS 8 /* Sequence number mismatch */
#define INM_1WAYREC 9 /* 1-Way */
#define INM_KILLNBR 10 /* Kill Neighbor */
#define INM_INACTTIM 11 /* Inactivity timer */
#define INM_LLDOWN 12 /* Line down */
struct ospf_area {
struct ospf_area *next;
u32 areaid;
struct top_graph *gr; /* LSA graph */
};
struct proto_ospf {
struct proto proto;
list iface_list; /* Interfaces we really use */
int areano; /* Number of area I belong to */
struct ospf_area *firstarea;
};
static int ospf_start(struct proto *p);
static void ospf_dump(struct proto *p);
static struct proto *ospf_init(struct proto_config *c);
static void ospf_preconfig(struct protocol *p, struct config *c);
static void ospf_postconfig(struct proto_config *c);
#include "proto/ospf/hello.h"
#include "proto/ospf/packet.h"
#include "proto/ospf/iface.h"
#include "proto/ospf/neighbor.h"
#include "proto/ospf/topology.h"
#include "proto/ospf/dbdes.h"
#endif /* _BIRD_OSPF_H_ */