bird/filter/f-inst.c
Maria Matejka 5cff1d5f02 Route: moved rte_src pointer from rta to rte
It is an auxiliary key in the routing table, not a route attribute.
2021-10-13 19:09:04 +02:00

1280 lines
36 KiB
C

/*
* Filters: Instructions themselves
*
* Copyright 1998 Pavel Machek <pavel@ucw.cz>
* Copyright 2018 Maria Matejka <mq@jmq.cz>
* Copyright 2018 CZ.NIC z.s.p.o.
*
* Can be freely distributed and used under the terms of the GNU GPL.
*
* The filter code goes through several phases:
*
* 1 Parsing
* Flex- and Bison-generated parser decodes the human-readable data into
* a struct f_inst tree. This is an infix tree that was interpreted by
* depth-first search execution in previous versions of the interpreter.
* All instructions have their constructor: f_new_inst(FI_EXAMPLE, ...)
* translates into f_new_inst_FI_EXAMPLE(...) and the types are checked in
* compile time. If the result of the instruction is always the same,
* it's reduced to FI_CONSTANT directly in constructor. This phase also
* counts how many instructions are underlying in means of f_line_item
* fields to know how much we have to allocate in the next phase.
*
* 2 Linearize before interpreting
* The infix tree is always interpreted in the same order. Therefore we
* sort the instructions one after another into struct f_line. Results
* and arguments of these instructions are implicitly put on a value
* stack; e.g. the + operation just takes two arguments from the value
* stack and puts the result on there.
*
* 3 Interpret
* The given line is put on a custom execution stack. If needed (FI_CALL,
* FI_SWITCH, FI_AND, FI_OR, FI_CONDITION, ...), another line is put on top
* of the stack; when that line finishes, the execution continues on the
* older lines on the stack where it stopped before.
*
* 4 Same
* On config reload, the filters have to be compared whether channel
* reload is needed or not. The comparison is done by comparing the
* struct f_line's recursively.
*
* The main purpose of this rework was to improve filter performance
* by making the interpreter non-recursive.
*
* The other outcome is concentration of instruction definitions to
* one place -- right here. You shall define your instruction only here
* and nowhere else.
*
* Beware. This file is interpreted by M4 macros. These macros
* may be more stupid than you could imagine. If something strange
* happens after changing this file, compare the results before and
* after your change (see the Makefile to find out where the results are)
* and see what really happened.
*
* This file is not directly a C source code -> it is a generator input
* for several C sources; every instruction block gets expanded into many
* different places.
*
* All the arguments are processed literally; if you need an argument including comma,
* you have to quote it by [[ ... ]]
*
* What is the syntax here?
* m4_dnl INST(FI_NOP, in, out) { enum value, input args, output args
* m4_dnl ARG(num, type); argument, its id (in data fields) and type accessible by v1, v2, v3
* m4_dnl ARG_ANY(num); argument with no type check accessible by v1, v2, v3
* m4_dnl VARARG; variable-length argument list; accessible by vv(i) and whati->varcount
* m4_dnl LINE(num, unused); this argument has to be converted to its own f_line
* m4_dnl SYMBOL; symbol handed from config
* m4_dnl STATIC_ATTR; static attribute definition
* m4_dnl DYNAMIC_ATTR; dynamic attribute definition
* m4_dnl RTC; route table config
* m4_dnl ACCESS_RTE; this instruction needs route
* m4_dnl ACCESS_EATTRS; this instruction needs extended attributes
*
* m4_dnl FID_MEMBER( custom instruction member
* m4_dnl C type, for storage in structs
* m4_dnl name, how the member is named
* m4_dnl comparator for same(), if different, this should be TRUE (CAVEAT)
* m4_dnl dump format string debug -> format string for bvsnprintf
* m4_dnl dump format args appropriate args
* m4_dnl )
*
* m4_dnl RESULT(type, union-field, value); putting this on value stack
* m4_dnl RESULT_VAL(value-struct); pass the struct f_val directly
* m4_dnl RESULT_VOID; return undef
* m4_dnl }
*
* Also note that the { ... } blocks are not respected by M4 at all.
* If you get weird unmatched-brace-pair errors, check what it generated and why.
* What is really considered as one instruction is not the { ... } block
* after m4_dnl INST() but all the code between them.
*
* Other code is just copied into the interpreter part.
*
* If you are satisfied with this, you don't need to read the following
* detailed description of what is really done with the instruction definitions.
*
* m4_dnl Now let's look under the cover. The code between each INST()
* m4_dnl is copied to several places, namely these (numbered by the M4 diversions
* m4_dnl used in filter/decl.m4):
*
* m4_dnl (102) struct f_inst *f_new_inst(FI_EXAMPLE [[ put it here ]])
* m4_dnl {
* m4_dnl ... (common code)
* m4_dnl (103) [[ put it here ]]
* m4_dnl ...
* m4_dnl if (all arguments are constant)
* m4_dnl (108) [[ put it here ]]
* m4_dnl }
* m4_dnl For writing directly to constructor argument list, use FID_NEW_ARGS.
* m4_dnl For computing something in constructor (103), use FID_NEW_BODY.
* m4_dnl For constant pre-interpretation (108), see below at FID_INTERPRET_BODY.
*
* m4_dnl struct f_inst {
* m4_dnl ... (common fields)
* m4_dnl union {
* m4_dnl struct {
* m4_dnl (101) [[ put it here ]]
* m4_dnl } i_FI_EXAMPLE;
* m4_dnl ...
* m4_dnl };
* m4_dnl };
* m4_dnl This structure is returned from constructor.
* m4_dnl For writing directly to this structure, use FID_STRUCT_IN.
*
* m4_dnl linearize(struct f_line *dest, const struct f_inst *what, uint pos) {
* m4_dnl ...
* m4_dnl switch (what->fi_code) {
* m4_dnl case FI_EXAMPLE:
* m4_dnl (105) [[ put it here ]]
* m4_dnl break;
* m4_dnl }
* m4_dnl }
* m4_dnl This is called when translating from struct f_inst to struct f_line_item.
* m4_dnl For accessing your custom instruction data, use following macros:
* m4_dnl whati -> for accessing (struct f_inst).i_FI_EXAMPLE
* m4_dnl item -> for accessing (struct f_line)[pos].i_FI_EXAMPLE
* m4_dnl For writing directly here, use FID_LINEARIZE_BODY.
*
* m4_dnl (107) struct f_line_item {
* m4_dnl ... (common fields)
* m4_dnl union {
* m4_dnl struct {
* m4_dnl (101) [[ put it here ]]
* m4_dnl } i_FI_EXAMPLE;
* m4_dnl ...
* m4_dnl };
* m4_dnl };
* m4_dnl The same as FID_STRUCT_IN (101) but for the other structure.
* m4_dnl This structure is returned from the linearizer (105).
* m4_dnl For writing directly to this structure, use FID_LINE_IN.
*
* m4_dnl f_dump_line_item_FI_EXAMPLE(const struct f_line_item *item, const int indent)
* m4_dnl {
* m4_dnl (104) [[ put it here ]]
* m4_dnl }
* m4_dnl This code dumps the instruction on debug. Note that the argument
* m4_dnl is the linearized instruction; if the instruction has arguments,
* m4_dnl their code has already been linearized and their value is taken
* m4_dnl from the value stack.
* m4_dnl For writing directly here, use FID_DUMP_BODY.
*
* m4_dnl f_same(...)
* m4_dnl {
* m4_dnl switch (f1_->fi_code) {
* m4_dnl case FI_EXAMPLE:
* m4_dnl (106) [[ put it here ]]
* m4_dnl break;
* m4_dnl }
* m4_dnl }
* m4_dnl This code compares the two given instrucions (f1_ and f2_)
* m4_dnl on reconfigure. For accessing your custom instruction data,
* m4_dnl use macros f1 and f2.
* m4_dnl For writing directly here, use FID_SAME_BODY.
*
* m4_dnl f_add_lines(...)
* m4_dnl {
* m4_dnl switch (what_->fi_code) {
* m4_dnl case FI_EXAMPLE:
* m4_dnl (109) [[ put it here ]]
* m4_dnl break;
* m4_dnl }
* m4_dnl }
* m4_dnl This code adds new filter lines reachable from the instruction
* m4_dnl to the filter iterator line buffer. This is for instructions
* m4_dnl that changes conrol flow, like FI_CONDITION or FI_CALL, most
* m4_dnl instructions do not need to update it. It is used in generic
* m4_dnl filter iteration code (FILTER_ITERATE*). For accessing your
* m4_dnl custom instruction data, use macros f1 and f2. For writing
* m4_dnl directly here, use FID_ITERATE_BODY.
*
* m4_dnl interpret(...)
* m4_dnl {
* m4_dnl switch (what->fi_code) {
* m4_dnl case FI_EXAMPLE:
* m4_dnl (108) [[ put it here ]]
* m4_dnl break;
* m4_dnl }
* m4_dnl }
* m4_dnl This code executes the instruction. Every pre-defined macro
* m4_dnl resets the output here. For setting it explicitly,
* m4_dnl use FID_INTERPRET_BODY.
* m4_dnl This code is put on two places; one is the interpreter, the other
* m4_dnl is instruction constructor. If you need to distinguish between
* m4_dnl these two, use FID_INTERPRET_EXEC or FID_INTERPRET_NEW respectively.
* m4_dnl To address the difference between interpreter and constructor
* m4_dnl environments, there are several convenience macros defined:
* m4_dnl runtime() -> for spitting out runtime error like division by zero
* m4_dnl RESULT(...) -> declare result; may overwrite arguments
* m4_dnl v1, v2, v3 -> positional arguments, may be overwritten by RESULT()
* m4_dnl falloc(size) -> allocate memory from the appropriate linpool
* m4_dnl fpool -> the current linpool
* m4_dnl NEVER_CONSTANT-> don't generate pre-interpretation code at all
* m4_dnl ACCESS_RTE -> check that route is available, also NEVER_CONSTANT
* m4_dnl ACCESS_EATTRS -> pre-cache the eattrs; use only with ACCESS_RTE
* m4_dnl f_rta_cow(fs) -> function to call before any change to route should be done
*
* m4_dnl If you are stymied, see FI_CALL or FI_CONSTANT or just search for
* m4_dnl the mentioned macros in this file to see what is happening there in wild.
*/
/* Binary operators */
INST(FI_ADD, 2, 1) {
ARG(1,T_INT);
ARG(2,T_INT);
RESULT(T_INT, i, v1.val.i + v2.val.i);
}
INST(FI_SUBTRACT, 2, 1) {
ARG(1,T_INT);
ARG(2,T_INT);
RESULT(T_INT, i, v1.val.i - v2.val.i);
}
INST(FI_MULTIPLY, 2, 1) {
ARG(1,T_INT);
ARG(2,T_INT);
RESULT(T_INT, i, v1.val.i * v2.val.i);
}
INST(FI_DIVIDE, 2, 1) {
ARG(1,T_INT);
ARG(2,T_INT);
if (v2.val.i == 0) runtime( "Mother told me not to divide by 0" );
RESULT(T_INT, i, v1.val.i / v2.val.i);
}
INST(FI_AND, 1, 1) {
ARG(1,T_BOOL);
ARG_TYPE_STATIC(2,T_BOOL);
RESULT_TYPE(T_BOOL);
if (v1.val.i)
LINE(2,0);
else
RESULT_VAL(v1);
}
INST(FI_OR, 1, 1) {
ARG(1,T_BOOL);
ARG_TYPE_STATIC(2,T_BOOL);
RESULT_TYPE(T_BOOL);
if (!v1.val.i)
LINE(2,0);
else
RESULT_VAL(v1);
}
INST(FI_PAIR_CONSTRUCT, 2, 1) {
ARG(1,T_INT);
ARG(2,T_INT);
uint u1 = v1.val.i;
uint u2 = v2.val.i;
if ((u1 > 0xFFFF) || (u2 > 0xFFFF))
runtime( "Can't operate with value out of bounds in pair constructor" );
RESULT(T_PAIR, i, (u1 << 16) | u2);
}
INST(FI_EC_CONSTRUCT, 2, 1) {
ARG_ANY(1);
ARG(2, T_INT);
FID_MEMBER(enum ec_subtype, ecs, f1->ecs != f2->ecs, "ec subtype %s", ec_subtype_str(item->ecs));
int ipv4_used;
u32 key, val;
if (v1.type == T_INT) {
ipv4_used = 0; key = v1.val.i;
}
else if (v1.type == T_QUAD) {
ipv4_used = 1; key = v1.val.i;
}
/* IP->Quad implicit conversion */
else if (val_is_ip4(&v1)) {
ipv4_used = 1; key = ipa_to_u32(v1.val.ip);
}
else
runtime("Argument 1 of EC constructor must be integer or IPv4 address, got 0x%02x", v1.type);
val = v2.val.i;
if (ecs == EC_GENERIC)
RESULT(T_EC, ec, ec_generic(key, val));
else if (ipv4_used)
if (val <= 0xFFFF)
RESULT(T_EC, ec, ec_ip4(ecs, key, val));
else
runtime("4-byte value %u can't be used with IP-address key in extended community", val);
else if (key < 0x10000)
RESULT(T_EC, ec, ec_as2(ecs, key, val));
else
if (val <= 0xFFFF)
RESULT(T_EC, ec, ec_as4(ecs, key, val));
else
runtime("4-byte value %u can't be used with 4-byte ASN in extended community", val);
}
INST(FI_LC_CONSTRUCT, 3, 1) {
ARG(1, T_INT);
ARG(2, T_INT);
ARG(3, T_INT);
RESULT(T_LC, lc, [[(lcomm) { v1.val.i, v2.val.i, v3.val.i }]]);
}
INST(FI_PATHMASK_CONSTRUCT, 0, 1) {
VARARG;
struct f_path_mask *pm = falloc(sizeof(struct f_path_mask) + whati->varcount * sizeof(struct f_path_mask_item));
pm->len = whati->varcount;
for (uint i=0; i<whati->varcount; i++) {
switch (vv(i).type) {
case T_PATH_MASK_ITEM:
if (vv(i).val.pmi.kind == PM_LOOP)
{
if (i == 0)
runtime("Path mask iterator '+' cannot be first");
/* We want PM_LOOP as prefix operator */
pm->item[i] = pm->item[i - 1];
pm->item[i - 1] = vv(i).val.pmi;
break;
}
pm->item[i] = vv(i).val.pmi;
break;
case T_INT:
pm->item[i] = (struct f_path_mask_item) {
.asn = vv(i).val.i,
.kind = PM_ASN,
};
break;
case T_SET:
if (vv(i).val.t->from.type != T_INT)
runtime("Only integer sets allowed in path mask");
pm->item[i] = (struct f_path_mask_item) {
.set = vv(i).val.t,
.kind = PM_ASN_SET,
};
break;
default:
runtime( "Error resolving path mask template: value not an integer" );
}
}
RESULT(T_PATH_MASK, path_mask, pm);
}
/* Relational operators */
INST(FI_NEQ, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
RESULT(T_BOOL, i, !val_same(&v1, &v2));
}
INST(FI_EQ, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
RESULT(T_BOOL, i, val_same(&v1, &v2));
}
INST(FI_LT, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
ARG_SAME_TYPE(1, 2);
int i = val_compare(&v1, &v2);
if (i == F_CMP_ERROR)
runtime( "Can't compare values of incompatible types" );
RESULT(T_BOOL, i, (i == -1));
}
INST(FI_LTE, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
ARG_SAME_TYPE(1, 2);
int i = val_compare(&v1, &v2);
if (i == F_CMP_ERROR)
runtime( "Can't compare values of incompatible types" );
RESULT(T_BOOL, i, (i != 1));
}
INST(FI_NOT, 1, 1) {
ARG(1,T_BOOL);
RESULT(T_BOOL, i, !v1.val.i);
}
INST(FI_MATCH, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
int i = val_in_range(&v1, &v2);
if (i == F_CMP_ERROR)
runtime( "~ applied on unknown type pair" );
RESULT(T_BOOL, i, !!i);
}
INST(FI_NOT_MATCH, 2, 1) {
ARG_ANY(1);
ARG_ANY(2);
int i = val_in_range(&v1, &v2);
if (i == F_CMP_ERROR)
runtime( "!~ applied on unknown type pair" );
RESULT(T_BOOL, i, !i);
}
INST(FI_DEFINED, 1, 1) {
ARG_ANY(1);
RESULT(T_BOOL, i, (v1.type != T_VOID) && !undef_value(v1));
}
INST(FI_TYPE, 1, 1) {
ARG_ANY(1); /* There may be more types supporting this operation */
switch (v1.type)
{
case T_NET:
RESULT(T_ENUM_NETTYPE, i, v1.val.net->type);
break;
default:
runtime( "Can't determine type of this item" );
}
}
INST(FI_IS_V4, 1, 1) {
ARG(1, T_IP);
RESULT(T_BOOL, i, ipa_is_ip4(v1.val.ip));
}
/* Set to indirect value prepared in v1 */
INST(FI_VAR_SET, 1, 0) {
NEVER_CONSTANT;
ARG_ANY(1);
SYMBOL;
ARG_TYPE(1, sym->class & 0xff);
fstk->vstk[curline.vbase + sym->offset] = v1;
}
INST(FI_VAR_GET, 0, 1) {
SYMBOL;
NEVER_CONSTANT;
RESULT_TYPE(sym->class & 0xff);
RESULT_VAL(fstk->vstk[curline.vbase + sym->offset]);
}
INST(FI_CONSTANT, 0, 1) {
FID_MEMBER(
struct f_val,
val,
[[ !val_same(&(f1->val), &(f2->val)) ]],
"value %s",
val_dump(&(item->val))
);
RESULT_TYPE(val.type);
RESULT_VAL(val);
}
INST(FI_CONDITION, 1, 0) {
ARG(1, T_BOOL);
if (v1.val.i)
LINE(2,0);
else
LINE(3,1);
}
INST(FI_PRINT, 0, 0) {
NEVER_CONSTANT;
VARARG;
if (whati->varcount && !(fs->flags & FF_SILENT))
for (uint i=0; i<whati->varcount; i++)
val_format(&(vv(i)), &fs->buf);
}
INST(FI_FLUSH, 0, 0) {
NEVER_CONSTANT;
if (!(fs->flags & FF_SILENT))
/* After log_commit, the buffer is reset */
log_commit(*L_INFO, &fs->buf);
}
INST(FI_DIE, 0, 0) {
NEVER_CONSTANT;
FID_MEMBER(enum filter_return, fret, f1->fret != f2->fret, "%s", filter_return_str(item->fret));
switch (whati->fret) {
case F_ACCEPT: /* Should take care about turning ACCEPT into MODIFY */
case F_ERROR:
case F_REJECT: /* Maybe print complete route along with reason to reject route? */
return fret; /* We have to return now, no more processing. */
default:
bug( "unknown return type: Can't happen");
}
}
INST(FI_RTA_GET, 0, 1) {
{
STATIC_ATTR;
ACCESS_RTE;
struct rta *rta = (*fs->rte)->attrs;
switch (sa.sa_code)
{
case SA_FROM: RESULT(sa.f_type, ip, rta->from); break;
case SA_GW: RESULT(sa.f_type, ip, rta->nh.gw); break;
case SA_NET: RESULT(sa.f_type, net, (*fs->rte)->net->n.addr); break;
case SA_PROTO: RESULT(sa.f_type, s, (*fs->rte)->src->proto->name); break;
case SA_SOURCE: RESULT(sa.f_type, i, rta->source); break;
case SA_SCOPE: RESULT(sa.f_type, i, rta->scope); break;
case SA_DEST: RESULT(sa.f_type, i, rta->dest); break;
case SA_IFNAME: RESULT(sa.f_type, s, rta->nh.iface ? rta->nh.iface->name : ""); break;
case SA_IFINDEX: RESULT(sa.f_type, i, rta->nh.iface ? rta->nh.iface->index : 0); break;
case SA_WEIGHT: RESULT(sa.f_type, i, rta->nh.weight + 1); break;
case SA_PREF: RESULT(sa.f_type, i, rta->pref); break;
case SA_GW_MPLS: RESULT(sa.f_type, i, rta->nh.labels ? rta->nh.label[0] : MPLS_NULL); break;
default:
bug("Invalid static attribute access (%u/%u)", sa.f_type, sa.sa_code);
}
}
}
INST(FI_RTA_SET, 1, 0) {
ACCESS_RTE;
ARG_ANY(1);
STATIC_ATTR;
ARG_TYPE(1, sa.f_type);
f_rta_cow(fs);
{
struct rta *rta = (*fs->rte)->attrs;
switch (sa.sa_code)
{
case SA_FROM:
rta->from = v1.val.ip;
break;
case SA_GW:
{
ip_addr ip = v1.val.ip;
struct iface *ifa = ipa_is_link_local(ip) ? rta->nh.iface : NULL;
neighbor *n = neigh_find((*fs->rte)->src->proto, ip, ifa, 0);
if (!n || (n->scope == SCOPE_HOST))
runtime( "Invalid gw address" );
rta->dest = RTD_UNICAST;
rta->nh.gw = ip;
rta->nh.iface = n->iface;
rta->nh.next = NULL;
rta->hostentry = NULL;
rta->nh.labels = 0;
}
break;
case SA_SCOPE:
rta->scope = v1.val.i;
break;
case SA_DEST:
{
int i = v1.val.i;
if ((i != RTD_BLACKHOLE) && (i != RTD_UNREACHABLE) && (i != RTD_PROHIBIT))
runtime( "Destination can be changed only to blackhole, unreachable or prohibit" );
rta->dest = i;
rta->nh.gw = IPA_NONE;
rta->nh.iface = NULL;
rta->nh.next = NULL;
rta->hostentry = NULL;
rta->nh.labels = 0;
}
break;
case SA_IFNAME:
{
struct iface *ifa = if_find_by_name(v1.val.s);
if (!ifa)
runtime( "Invalid iface name" );
rta->dest = RTD_UNICAST;
rta->nh.gw = IPA_NONE;
rta->nh.iface = ifa;
rta->nh.next = NULL;
rta->hostentry = NULL;
rta->nh.labels = 0;
}
break;
case SA_GW_MPLS:
{
if (v1.val.i >= 0x100000)
runtime( "Invalid MPLS label" );
if (v1.val.i != MPLS_NULL)
{
rta->nh.label[0] = v1.val.i;
rta->nh.labels = 1;
}
else
rta->nh.labels = 0;
}
break;
case SA_WEIGHT:
{
int i = v1.val.i;
if (i < 1 || i > 256)
runtime( "Setting weight value out of bounds" );
if (rta->dest != RTD_UNICAST)
runtime( "Setting weight needs regular nexthop " );
/* Set weight on all next hops */
for (struct nexthop *nh = &rta->nh; nh; nh = nh->next)
nh->weight = i - 1;
}
break;
case SA_PREF:
rta->pref = v1.val.i;
break;
default:
bug("Invalid static attribute access (%u/%u)", sa.f_type, sa.sa_code);
}
}
}
INST(FI_EA_GET, 0, 1) { /* Access to extended attributes */
DYNAMIC_ATTR;
ACCESS_RTE;
ACCESS_EATTRS;
RESULT_TYPE(da.f_type);
{
eattr *e = ea_find(*fs->eattrs, da.ea_code);
if (!e) {
/* A special case: undefined as_path looks like empty as_path */
if (da.type == EAF_TYPE_AS_PATH) {
RESULT_(T_PATH, ad, &null_adata);
break;
}
/* The same special case for int_set */
if (da.type == EAF_TYPE_INT_SET) {
RESULT_(T_CLIST, ad, &null_adata);
break;
}
/* The same special case for ec_set */
if (da.type == EAF_TYPE_EC_SET) {
RESULT_(T_ECLIST, ad, &null_adata);
break;
}
/* The same special case for lc_set */
if (da.type == EAF_TYPE_LC_SET) {
RESULT_(T_LCLIST, ad, &null_adata);
break;
}
/* Undefined value */
RESULT_VOID;
break;
}
switch (e->type & EAF_TYPE_MASK) {
case EAF_TYPE_INT:
RESULT_(da.f_type, i, e->u.data);
break;
case EAF_TYPE_ROUTER_ID:
RESULT_(T_QUAD, i, e->u.data);
break;
case EAF_TYPE_OPAQUE:
RESULT_(T_ENUM_EMPTY, i, 0);
break;
case EAF_TYPE_IP_ADDRESS:
RESULT_(T_IP, ip, *((ip_addr *) e->u.ptr->data));
break;
case EAF_TYPE_AS_PATH:
RESULT_(T_PATH, ad, e->u.ptr);
break;
case EAF_TYPE_BITFIELD:
RESULT_(T_BOOL, i, !!(e->u.data & (1u << da.bit)));
break;
case EAF_TYPE_INT_SET:
RESULT_(T_CLIST, ad, e->u.ptr);
break;
case EAF_TYPE_EC_SET:
RESULT_(T_ECLIST, ad, e->u.ptr);
break;
case EAF_TYPE_LC_SET:
RESULT_(T_LCLIST, ad, e->u.ptr);
break;
case EAF_TYPE_UNDEF:
RESULT_VOID;
break;
default:
bug("Unknown dynamic attribute type");
}
}
}
INST(FI_EA_SET, 1, 0) {
ACCESS_RTE;
ACCESS_EATTRS;
ARG_ANY(1);
DYNAMIC_ATTR;
ARG_TYPE(1, da.f_type);
{
struct ea_list *l = lp_alloc(fs->pool, sizeof(struct ea_list) + sizeof(eattr));
l->next = NULL;
l->flags = EALF_SORTED;
l->count = 1;
l->attrs[0].id = da.ea_code;
l->attrs[0].flags = 0;
l->attrs[0].type = da.type | EAF_ORIGINATED | EAF_FRESH;
switch (da.type) {
case EAF_TYPE_INT:
case EAF_TYPE_ROUTER_ID:
l->attrs[0].u.data = v1.val.i;
break;
case EAF_TYPE_OPAQUE:
runtime( "Setting opaque attribute is not allowed" );
break;
case EAF_TYPE_IP_ADDRESS:;
int len = sizeof(ip_addr);
struct adata *ad = lp_alloc(fs->pool, sizeof(struct adata) + len);
ad->length = len;
(* (ip_addr *) ad->data) = v1.val.ip;
l->attrs[0].u.ptr = ad;
break;
case EAF_TYPE_AS_PATH:
case EAF_TYPE_INT_SET:
case EAF_TYPE_EC_SET:
case EAF_TYPE_LC_SET:
l->attrs[0].u.ptr = v1.val.ad;
break;
case EAF_TYPE_BITFIELD:
{
/* First, we have to find the old value */
eattr *e = ea_find(*fs->eattrs, da.ea_code);
u32 data = e ? e->u.data : 0;
if (v1.val.i)
l->attrs[0].u.data = data | (1u << da.bit);
else
l->attrs[0].u.data = data & ~(1u << da.bit);
}
break;
default:
bug("Unknown dynamic attribute type");
}
f_rta_cow(fs);
l->next = *fs->eattrs;
*fs->eattrs = l;
}
}
INST(FI_EA_UNSET, 0, 0) {
DYNAMIC_ATTR;
ACCESS_RTE;
ACCESS_EATTRS;
{
struct ea_list *l = lp_alloc(fs->pool, sizeof(struct ea_list) + sizeof(eattr));
l->next = NULL;
l->flags = EALF_SORTED;
l->count = 1;
l->attrs[0].id = da.ea_code;
l->attrs[0].flags = 0;
l->attrs[0].type = EAF_TYPE_UNDEF | EAF_ORIGINATED | EAF_FRESH;
l->attrs[0].u.data = 0;
f_rta_cow(fs);
l->next = *fs->eattrs;
*fs->eattrs = l;
}
}
INST(FI_LENGTH, 1, 1) { /* Get length of */
ARG_ANY(1);
switch(v1.type) {
case T_NET: RESULT(T_INT, i, net_pxlen(v1.val.net)); break;
case T_PATH: RESULT(T_INT, i, as_path_getlen(v1.val.ad)); break;
case T_CLIST: RESULT(T_INT, i, int_set_get_size(v1.val.ad)); break;
case T_ECLIST: RESULT(T_INT, i, ec_set_get_size(v1.val.ad)); break;
case T_LCLIST: RESULT(T_INT, i, lc_set_get_size(v1.val.ad)); break;
default: runtime( "Prefix, path, clist or eclist expected" );
}
}
INST(FI_NET_SRC, 1, 1) { /* Get src prefix */
ARG(1, T_NET);
net_addr_union *net = (void *) v1.val.net;
net_addr *src = falloc(sizeof(net_addr_ip6));
const byte *part;
switch(v1.val.net->type) {
case NET_FLOW4:
part = flow4_get_part(&net->flow4, FLOW_TYPE_SRC_PREFIX);
if (part)
net_fill_ip4(src, flow_read_ip4_part(part), flow_read_pxlen(part));
else
net_fill_ip4(src, IP4_NONE, 0);
break;
case NET_FLOW6:
part = flow6_get_part(&net->flow6, FLOW_TYPE_SRC_PREFIX);
if (part)
net_fill_ip6(src, flow_read_ip6_part(part), flow_read_pxlen(part));
else
net_fill_ip6(src, IP6_NONE, 0);
break;
case NET_IP6_SADR:
net_fill_ip6(src, net->ip6_sadr.src_prefix, net->ip6_sadr.src_pxlen);
break;
default:
runtime( "Flow or SADR expected" );
}
RESULT(T_NET, net, src);
}
INST(FI_NET_DST, 1, 1) { /* Get dst prefix */
ARG(1, T_NET);
net_addr_union *net = (void *) v1.val.net;
net_addr *dst = falloc(sizeof(net_addr_ip6));
const byte *part;
switch(v1.val.net->type) {
case NET_FLOW4:
part = flow4_get_part(&net->flow4, FLOW_TYPE_DST_PREFIX);
if (part)
net_fill_ip4(dst, flow_read_ip4_part(part), flow_read_pxlen(part));
else
net_fill_ip4(dst, IP4_NONE, 0);
break;
case NET_FLOW6:
part = flow6_get_part(&net->flow6, FLOW_TYPE_DST_PREFIX);
if (part)
net_fill_ip6(dst, flow_read_ip6_part(part), flow_read_pxlen(part));
else
net_fill_ip6(dst, IP6_NONE, 0);
break;
case NET_IP6_SADR:
net_fill_ip6(dst, net->ip6_sadr.dst_prefix, net->ip6_sadr.dst_pxlen);
break;
default:
runtime( "Flow or SADR expected" );
}
RESULT(T_NET, net, dst);
}
INST(FI_ROA_MAXLEN, 1, 1) { /* Get ROA max prefix length */
ARG(1, T_NET);
if (!net_is_roa(v1.val.net))
runtime( "ROA expected" );
RESULT(T_INT, i, (v1.val.net->type == NET_ROA4) ?
((net_addr_roa4 *) v1.val.net)->max_pxlen :
((net_addr_roa6 *) v1.val.net)->max_pxlen);
}
INST(FI_ROA_ASN, 1, 1) { /* Get ROA ASN */
ARG(1, T_NET);
if (!net_is_roa(v1.val.net))
runtime( "ROA expected" );
RESULT(T_INT, i, (v1.val.net->type == NET_ROA4) ?
((net_addr_roa4 *) v1.val.net)->asn :
((net_addr_roa6 *) v1.val.net)->asn);
}
INST(FI_IP, 1, 1) { /* Convert prefix to ... */
ARG(1, T_NET);
RESULT(T_IP, ip, net_prefix(v1.val.net));
}
INST(FI_ROUTE_DISTINGUISHER, 1, 1) {
ARG(1, T_NET);
if (!net_is_vpn(v1.val.net))
runtime( "VPN address expected" );
RESULT(T_RD, ec, net_rd(v1.val.net));
}
INST(FI_AS_PATH_FIRST, 1, 1) { /* Get first ASN from AS PATH */
ARG(1, T_PATH);
u32 as = 0;
as_path_get_first(v1.val.ad, &as);
RESULT(T_INT, i, as);
}
INST(FI_AS_PATH_LAST, 1, 1) { /* Get last ASN from AS PATH */
ARG(1, T_PATH);
u32 as = 0;
as_path_get_last(v1.val.ad, &as);
RESULT(T_INT, i, as);
}
INST(FI_AS_PATH_LAST_NAG, 1, 1) { /* Get last ASN from non-aggregated part of AS PATH */
ARG(1, T_PATH);
RESULT(T_INT, i, as_path_get_last_nonaggregated(v1.val.ad));
}
INST(FI_RETURN, 1, 1) {
NEVER_CONSTANT;
/* Acquire the return value */
ARG_ANY(1);
uint retpos = fstk->vcnt;
/* Drop every sub-block including ourselves */
do fstk->ecnt--;
while ((fstk->ecnt > 0) && !(fstk->estk[fstk->ecnt].emask & FE_RETURN));
/* Now we are at the caller frame; if no such, try to convert to accept/reject. */
if (!fstk->ecnt)
{
if (fstk->vstk[retpos].type == T_BOOL)
return (fstk->vstk[retpos].val.i) ? F_ACCEPT : F_REJECT;
else
runtime("Can't return non-bool from non-function");
}
/* Set the value stack position, overwriting the former implicit void */
fstk->vcnt = fstk->estk[fstk->ecnt].ventry - 1;
/* Copy the return value */
RESULT_VAL(fstk->vstk[retpos]);
}
INST(FI_CALL, 0, 1) {
NEVER_CONSTANT;
SYMBOL;
FID_SAME_BODY()
if (!(f1->sym->flags & SYM_FLAG_SAME))
return 0;
FID_ITERATE_BODY()
BUFFER_PUSH(fit->lines) = whati->sym->function;
FID_INTERPRET_BODY()
/* Push the body on stack */
LINEX(sym->function);
curline.emask |= FE_RETURN;
/* Before this instruction was called, there was the T_VOID
* automatic return value pushed on value stack and also
* sym->function->args function arguments. Setting the
* vbase to point to first argument. */
ASSERT(curline.ventry >= sym->function->args);
curline.ventry -= sym->function->args;
curline.vbase = curline.ventry;
/* Storage for local variables */
f_vcnt_check_overflow(sym->function->vars);
memset(&(fstk->vstk[fstk->vcnt]), 0, sizeof(struct f_val) * sym->function->vars);
fstk->vcnt += sym->function->vars;
}
INST(FI_DROP_RESULT, 1, 0) {
NEVER_CONSTANT;
ARG_ANY(1);
}
INST(FI_SWITCH, 1, 0) {
ARG_ANY(1);
FID_MEMBER(struct f_tree *, tree, [[!same_tree(f1->tree, f2->tree)]], "tree %p", item->tree);
FID_ITERATE_BODY()
tree_walk(whati->tree, f_add_tree_lines, fit);
FID_INTERPRET_BODY()
const struct f_tree *t = find_tree(tree, &v1);
if (!t) {
v1.type = T_VOID;
t = find_tree(tree, &v1);
if (!t) {
debug( "No else statement?\n");
FID_HIC(,break,return NULL);
}
}
/* It is actually possible to have t->data NULL */
LINEX(t->data);
}
INST(FI_IP_MASK, 2, 1) { /* IP.MASK(val) */
ARG(1, T_IP);
ARG(2, T_INT);
RESULT(T_IP, ip, [[ ipa_is_ip4(v1.val.ip) ?
ipa_from_ip4(ip4_and(ipa_to_ip4(v1.val.ip), ip4_mkmask(v2.val.i))) :
ipa_from_ip6(ip6_and(ipa_to_ip6(v1.val.ip), ip6_mkmask(v2.val.i))) ]]);
}
INST(FI_PATH_PREPEND, 2, 1) { /* Path prepend */
ARG(1, T_PATH);
ARG(2, T_INT);
RESULT(T_PATH, ad, [[ as_path_prepend(fpool, v1.val.ad, v2.val.i) ]]);
}
INST(FI_CLIST_ADD, 2, 1) { /* (Extended) Community list add */
ARG_ANY(1);
ARG_ANY(2);
RESULT_TYPE(f1->type);
if (v1.type == T_PATH)
runtime("Can't add to path");
else if (v1.type == T_CLIST)
{
/* Community (or cluster) list */
struct f_val dummy;
if ((v2.type == T_PAIR) || (v2.type == T_QUAD))
RESULT_(T_CLIST, ad, [[ int_set_add(fpool, v1.val.ad, v2.val.i) ]]);
/* IP->Quad implicit conversion */
else if (val_is_ip4(&v2))
RESULT_(T_CLIST, ad, [[ int_set_add(fpool, v1.val.ad, ipa_to_u32(v2.val.ip)) ]]);
else if ((v2.type == T_SET) && clist_set_type(v2.val.t, &dummy))
runtime("Can't add set");
else if (v2.type == T_CLIST)
RESULT_(T_CLIST, ad, [[ int_set_union(fpool, v1.val.ad, v2.val.ad) ]]);
else
runtime("Can't add non-pair");
}
else if (v1.type == T_ECLIST)
{
/* v2.val is either EC or EC-set */
if ((v2.type == T_SET) && eclist_set_type(v2.val.t))
runtime("Can't add set");
else if (v2.type == T_ECLIST)
RESULT_(T_ECLIST, ad, [[ ec_set_union(fpool, v1.val.ad, v2.val.ad) ]]);
else if (v2.type != T_EC)
runtime("Can't add non-ec");
else
RESULT_(T_ECLIST, ad, [[ ec_set_add(fpool, v1.val.ad, v2.val.ec) ]]);
}
else if (v1.type == T_LCLIST)
{
/* v2.val is either LC or LC-set */
if ((v2.type == T_SET) && lclist_set_type(v2.val.t))
runtime("Can't add set");
else if (v2.type == T_LCLIST)
RESULT_(T_LCLIST, ad, [[ lc_set_union(fpool, v1.val.ad, v2.val.ad) ]]);
else if (v2.type != T_LC)
runtime("Can't add non-lc");
else
RESULT_(T_LCLIST, ad, [[ lc_set_add(fpool, v1.val.ad, v2.val.lc) ]]);
}
else
runtime("Can't add to non-[e|l]clist");
}
INST(FI_CLIST_DEL, 2, 1) { /* (Extended) Community list add or delete */
ARG_ANY(1);
ARG_ANY(2);
RESULT_TYPE(f1->type);
if (v1.type == T_PATH)
{
const struct f_tree *set = NULL;
u32 key = 0;
if (v2.type == T_INT)
key = v2.val.i;
else if ((v2.type == T_SET) && (v2.val.t->from.type == T_INT))
set = v2.val.t;
else
runtime("Can't delete non-integer (set)");
RESULT_(T_PATH, ad, [[ as_path_filter(fpool, v1.val.ad, set, key, 0) ]]);
}
else if (v1.type == T_CLIST)
{
/* Community (or cluster) list */
struct f_val dummy;
if ((v2.type == T_PAIR) || (v2.type == T_QUAD))
RESULT_(T_CLIST, ad, [[ int_set_del(fpool, v1.val.ad, v2.val.i) ]]);
/* IP->Quad implicit conversion */
else if (val_is_ip4(&v2))
RESULT_(T_CLIST, ad, [[ int_set_del(fpool, v1.val.ad, ipa_to_u32(v2.val.ip)) ]]);
else if ((v2.type == T_SET) && clist_set_type(v2.val.t, &dummy) || (v2.type == T_CLIST))
RESULT_(T_CLIST, ad, [[ clist_filter(fpool, v1.val.ad, &v2, 0) ]]);
else
runtime("Can't delete non-pair");
}
else if (v1.type == T_ECLIST)
{
/* v2.val is either EC or EC-set */
if ((v2.type == T_SET) && eclist_set_type(v2.val.t) || (v2.type == T_ECLIST))
RESULT_(T_ECLIST, ad, [[ eclist_filter(fpool, v1.val.ad, &v2, 0) ]]);
else if (v2.type != T_EC)
runtime("Can't delete non-ec");
else
RESULT_(T_ECLIST, ad, [[ ec_set_del(fpool, v1.val.ad, v2.val.ec) ]]);
}
else if (v1.type == T_LCLIST)
{
/* v2.val is either LC or LC-set */
if ((v2.type == T_SET) && lclist_set_type(v2.val.t) || (v2.type == T_LCLIST))
RESULT_(T_LCLIST, ad, [[ lclist_filter(fpool, v1.val.ad, &v2, 0) ]]);
else if (v2.type != T_LC)
runtime("Can't delete non-lc");
else
RESULT_(T_LCLIST, ad, [[ lc_set_del(fpool, v1.val.ad, v2.val.lc) ]]);
}
else
runtime("Can't delete in non-[e|l]clist");
}
INST(FI_CLIST_FILTER, 2, 1) { /* (Extended) Community list add or delete */
ARG_ANY(1);
ARG_ANY(2);
RESULT_TYPE(f1->type);
if (v1.type == T_PATH)
{
u32 key = 0;
if ((v2.type == T_SET) && (v2.val.t->from.type == T_INT))
RESULT_(T_PATH, ad, [[ as_path_filter(fpool, v1.val.ad, v2.val.t, key, 1) ]]);
else
runtime("Can't filter integer");
}
else if (v1.type == T_CLIST)
{
/* Community (or cluster) list */
struct f_val dummy;
if ((v2.type == T_SET) && clist_set_type(v2.val.t, &dummy) || (v2.type == T_CLIST))
RESULT_(T_CLIST, ad, [[ clist_filter(fpool, v1.val.ad, &v2, 1) ]]);
else
runtime("Can't filter pair");
}
else if (v1.type == T_ECLIST)
{
/* v2.val is either EC or EC-set */
if ((v2.type == T_SET) && eclist_set_type(v2.val.t) || (v2.type == T_ECLIST))
RESULT_(T_ECLIST, ad, [[ eclist_filter(fpool, v1.val.ad, &v2, 1) ]]);
else
runtime("Can't filter ec");
}
else if (v1.type == T_LCLIST)
{
/* v2.val is either LC or LC-set */
if ((v2.type == T_SET) && lclist_set_type(v2.val.t) || (v2.type == T_LCLIST))
RESULT_(T_LCLIST, ad, [[ lclist_filter(fpool, v1.val.ad, &v2, 1) ]]);
else
runtime("Can't filter lc");
}
else
runtime("Can't filter non-[e|l]clist");
}
INST(FI_ROA_CHECK_IMPLICIT, 0, 1) { /* ROA Check */
NEVER_CONSTANT;
RTC(1);
struct rtable *table = rtc->table;
ACCESS_RTE;
ACCESS_EATTRS;
const net_addr *net = (*fs->rte)->net->n.addr;
/* We ignore temporary attributes, probably not a problem here */
/* 0x02 is a value of BA_AS_PATH, we don't want to include BGP headers */
eattr *e = ea_find(*fs->eattrs, EA_CODE(PROTOCOL_BGP, 0x02));
if (!e || ((e->type & EAF_TYPE_MASK) != EAF_TYPE_AS_PATH))
runtime("Missing AS_PATH attribute");
u32 as = 0;
as_path_get_last(e->u.ptr, &as);
if (!table)
runtime("Missing ROA table");
if (table->addr_type != NET_ROA4 && table->addr_type != NET_ROA6)
runtime("Table type must be either ROA4 or ROA6");
if (table->addr_type != (net->type == NET_IP4 ? NET_ROA4 : NET_ROA6))
RESULT(T_ENUM_ROA, i, ROA_UNKNOWN); /* Prefix and table type mismatch */
else
RESULT(T_ENUM_ROA, i, [[ net_roa_check(table, net, as) ]]);
}
INST(FI_ROA_CHECK_EXPLICIT, 2, 1) { /* ROA Check */
NEVER_CONSTANT;
ARG(1, T_NET);
ARG(2, T_INT);
RTC(3);
struct rtable *table = rtc->table;
u32 as = v2.val.i;
if (!table)
runtime("Missing ROA table");
if (table->addr_type != NET_ROA4 && table->addr_type != NET_ROA6)
runtime("Table type must be either ROA4 or ROA6");
if (table->addr_type != (v1.val.net->type == NET_IP4 ? NET_ROA4 : NET_ROA6))
RESULT(T_ENUM_ROA, i, ROA_UNKNOWN); /* Prefix and table type mismatch */
else
RESULT(T_ENUM_ROA, i, [[ net_roa_check(table, v1.val.net, as) ]]);
}
INST(FI_FORMAT, 1, 0) { /* Format */
ARG_ANY(1);
RESULT(T_STRING, s, val_format_str(fpool, &v1));
}
INST(FI_ASSERT, 1, 0) { /* Birdtest Assert */
NEVER_CONSTANT;
ARG(1, T_BOOL);
FID_MEMBER(char *, s, [[strcmp(f1->s, f2->s)]], "string %s", item->s);
ASSERT(s);
if (!bt_assert_hook)
runtime("No bt_assert hook registered, can't assert");
bt_assert_hook(v1.val.i, what);
}