Try to fix some weird null registry

Makefile: explicit rules to generale static and dynamic libraries

.gitignore

@@ -0,0 +1,3 @@
+*.o
+*.a
+*.gch

src/Makefile

@@ -1,16 +1,36 @@
-CFLAGS = -Wall -O3 -Wno-unused-variable
+CFLAGS ?= -Wall -O3 -Wno-unused-variable
-CXXFLAGS = -std=c++11 -Wall -O3 -Wno-unused-variable -I /opt/vc/include 
+CFLAGS += -std=c++11 -fPIC
-LDFLAGS = -lm -lrt -lpthread -L/opt/vc/lib -lbcm_host
+CXXFLAGS ?= -std=c++11 -Wall -O3 -Wno-unused-variable -I /opt/vc/include 
-CCP = c++
+CXXFLAGS += -std=c++11 -Wall -O3 -Wno-unused-variable -fPIC
-CC = cc
+LDFLAGS ?= -lm -lrt -lpthread -L/opt/vc/lib -lbcm_host
+LDFLAGS += -fPIC
+CXX ?= c++
+CC ?= cc
+PREFIX ?= /usr/local/
+SRCCC=$(wildcard *.c)
+SRCXX=$(wildcard *.cpp)
+OBJS=$(SRCCC:.c=.o)
+OBJS+=$(SRCXX:.cpp=.o)
 
-librpitx: librpitx.h gpio.h gpio.cpp dma.h dma.cpp mailbox.c raspberry_pi_revision.c fmdmasync.h fmdmasync.cpp ngfmdmasync.h ngfmdmasync.cpp dsp.h dsp.cpp iqdmasync.h iqdmasync.cpp serialdmasync.h serialdmasync.cpp phasedmasync.h phasedmasync.cpp fskburst.h fskburst.cpp ookburst.cpp ookburst.h atv.h atv.cpp util.h
+all: librpitx.a librpitx.so
-	#$(CC) $(CFLAGS) -c -o mailbox.o mailbox.c
-	$(CC) $(CFLAGS) -c -o raspberry_pi_revision.o raspberry_pi_revision.c
-	$(CCP) $(CXXFLAGS) -c dsp.cpp iqdmasync.cpp ngfmdmasync.cpp fmdmasync.cpp  dma.cpp gpio.cpp serialdmasync.cpp phasedmasync.cpp amdmasync.h amdmasync.cpp fskburst.cpp ookburst.cpp atv.cpp util.cpp mailbox.c
-	$(AR) rc librpitx.a dsp.o iqdmasync.o ngfmdmasync.o fmdmasync.o  dma.o gpio.o mailbox.o raspberry_pi_revision.o  serialdmasync.o phasedmasync.o amdmasync.o fskburst.o ookburst.o atv.o util.o mailbox.o
 
-install: librpitx
+%.o: %.c
+	$(CXX) $(CFLAGS) -c $^
+
+%.o: %.cpp
+	$(CXX) $(CXXFLAGS) -c $^
+
+librpitx.a: $(OBJS)
+	$(AR) rc $@ $^
+
+librpitx.so: $(OBJS)
+	$(CXX) -fPIC -shared -o $@ $^ $(LDFLAGS) 
+
+install: librpitx.a
+	mkdir -p $(PREFIX)/include/librpitx
+	install *.h $(PREFIX)/include/librpitx
+	mkdir -p $(PREFIX)/lib
+	install librpitx.a $(PREFIX)/lib
 
 clean:
-	rm -f *.o *.a
+	rm -f $(OBJS) *.a *.so

src/atv.cpp

@@ -158,7 +158,7 @@ void atv::SetDmaAlgo()
     }
     cbp--;
     cbp->next = mem_virt_to_phys(cbarray); // We loop to the first CB
-    dbg_printf(1, "Last cbp :  %d \n", ((unsigned int)(cbp) - (unsigned int)(cbarray)) / sizeof(dma_cb_t));
+    dbg_printf(1, "Last cbp :  %d \n", ((uintptr_t)(cbp) - (uintptr_t)(cbarray)) / sizeof(dma_cb_t));
 }
 
 void atv::SetFrame(unsigned char *Luminance, size_t Lines)

src/dma.cpp

@@ -19,7 +19,7 @@ This program is free software: you can redistribute it and/or modify
 #include "dma.h"
 #include "stdio.h"
 #include "util.h"
-#include <bcm_host.h>
+#include "rpi.h"
 
 extern "C"
 {
@@ -36,15 +36,20 @@ dma::dma(int Channel,uint32_t CBSize,uint32_t UserMemSize) // Fixme! Need to che
 	
 	//Channel DMA is now hardcoded according to Raspi Model (DMA 7 for Pi4, DMA 14 for others)
 	uint32_t BCM2708_PERI_BASE =bcm_host_get_peripheral_address();
+	
+	channel=Channel;
 	if(BCM2708_PERI_BASE==0xFE000000)
 	{
 		channel= 7; // Pi4
+		dbg_printf(1,"dma PI4 using channel %d\n",channel);
 	}
 	else
 	{
 		channel = 14; // Other Pi
+		dbg_printf(1,"dma (NOT a PI4)  using channel %d\n",channel);
 	}
-	dbg_printf(1,"Channel %d CBSize %u UsermemSize %u\n",Channel,CBSize,UserMemSize);
+	
+	dbg_printf(1,"channel %d CBSize %u UsermemSize %u\n",channel,CBSize,UserMemSize);
 	
     mbox.handle = mbox_open();
 	if (mbox.handle < 0)

src/gpio.cpp

@@ -24,9 +24,9 @@ extern "C" {
 #include <unistd.h>
 #include <sys/timex.h>
 #include <math.h>
+#include <string.h>
 #include "util.h"
-#include <bcm_host.h>
+#include "rpi.h"
-//#include "/opt/vc/include/bcm_host.h"
 
 gpio::gpio(uint32_t base, uint32_t len)
 {
@@ -94,15 +94,16 @@ uint32_t gpio::GetPeripheralBase()
 {
 	RASPBERRY_PI_INFO_T info;
 	uint32_t BCM2708_PERI_BASE =bcm_host_get_peripheral_address();
-	dbg_printf(1,"Peri Base = %x SDRAM %x\n",/*get_hwbase()*/bcm_host_get_peripheral_address(),bcm_host_get_sdram_address());
+	dbg_printf(0,"Peri Base = %x SDRAM %x\n",/*get_hwbase()*/bcm_host_get_peripheral_address(),bcm_host_get_sdram_address());
 	if(BCM2708_PERI_BASE==0xFE000000) // Fixme , could be inspect without this hardcoded value
 	{
+               dbg_printf(0,"RPi4 GPIO detected\n");
 		pi_is_2711=true;  //Rpi4
 		XOSC_FREQUENCY=54000000;
 	}
 	if(BCM2708_PERI_BASE==0)
 	{
-		dbg_printf(0,"Unknown peripheral base, swith to PI4 \n");
+		dbg_printf(0,"Unknown peripheral base, switch to PI4 \n");
 		BCM2708_PERI_BASE=0xfe000000;
 		XOSC_FREQUENCY=54000000;
 		pi_is_2711=true;  
@@ -135,7 +136,7 @@ clkgpio::~clkgpio()
 
 int clkgpio::SetPllNumber(int PllNo, int MashType)
 {
-	//print_clock_tree();
+	print_clock_tree();
 	if (PllNo < 8)
 		pllnumber = PllNo;
 	else
@@ -168,7 +169,9 @@ uint64_t clkgpio::GetPllFrequency(int PllNo)
 	//case clk_pllb:Freq=XOSC_FREQUENCY*((uint64_t)gpioreg[PLLB_CTRL]&0x3ff) +XOSC_FREQUENCY*(uint64_t)gpioreg[PLLB_FRAC]/(1<<20);break;
 	case clk_pllc:
 		//Freq = (XOSC_FREQUENCY * ((uint64_t)gpioreg[PLLC_CTRL] & 0x3ff) + (XOSC_FREQUENCY * (uint64_t)gpioreg[PLLC_FRAC]) / (1 << 20)) / (2*gpioreg[PLLC_PER] >> 1)) /((gpioreg[PLLC_CTRL] >> 12)&0x7) ;
-		Freq =( (XOSC_FREQUENCY * ((uint64_t)gpioreg[PLLC_CTRL] & 0x3ff) + (XOSC_FREQUENCY * (uint64_t)gpioreg[PLLC_FRAC]) / (1 << 20)) / (2*gpioreg[PLLC_PER] >> 1))/((gpioreg[PLLC_CTRL] >> 12)&0x7) ;
+		//dbg_printf(1, "Gpio reg %x %x\n",gpioreg[PLLC_PER],gpioreg[PLLC_CTRL] >> 12);
+		if((gpioreg[PLLC_PER]!=0)&&(gpioreg[PLLC_CTRL] >> 12 != 0)) 
+			Freq =( (XOSC_FREQUENCY * ((uint64_t)gpioreg[PLLC_CTRL] & 0x3ff) + (XOSC_FREQUENCY * (uint64_t)gpioreg[PLLC_FRAC]) / (1 << 20)) / (2*gpioreg[PLLC_PER] >> 1))/((gpioreg[PLLC_CTRL] >> 12)&0x7) ;
 		break;
 	case clk_plld:
 		Freq =( (XOSC_FREQUENCY * ((uint64_t)gpioreg[PLLD_CTRL] & 0x3ff) + (XOSC_FREQUENCY * (uint64_t)gpioreg[PLLD_FRAC]) / (1 << 20)) / (2*gpioreg[PLLD_PER] >> 1))/((gpioreg[PLLD_CTRL] >> 12)&0x7) ;
@@ -177,7 +180,8 @@ uint64_t clkgpio::GetPllFrequency(int PllNo)
 		Freq =( XOSC_FREQUENCY * ((uint64_t)gpioreg[PLLH_CTRL] & 0x3ff) + XOSC_FREQUENCY * (uint64_t)gpioreg[PLLH_FRAC] / (1 << 20))/(2*(gpioreg[PLLH_CTRL] >> 12)&0x7) ;
 		break;
 	}
-	//if(pi_is_2711) Freq*=2LL;
+	if(!pi_is_2711) // FixMe : Surely a register which say it is a 2x
+		Freq*=2LL;
 	Freq=Freq*(1.0-clk_ppm*1e-6);
 	dbg_printf(1, "Pi4=%d Xosc = %llu Freq PLL no %d= %llu\n",pi_is_2711,XOSC_FREQUENCY,PllNo, Freq);
 

src/rpi.c

@@ -0,0 +1,31 @@
+#include "stdint.h"
+#include <cstdio>
+
+static unsigned get_dt_ranges(const char *filename, unsigned offset)
+{
+   unsigned address = ~0;
+   FILE *fp = fopen(filename, "rb");
+   if (fp)
+   {
+      unsigned char buf[4];
+      fseek(fp, offset, SEEK_SET);
+      if (fread(buf, 1, sizeof buf, fp) == sizeof buf)
+         address = buf[0] << 24 | buf[1] << 16 | buf[2] << 8 | buf[3] << 0;
+      fclose(fp);
+   }
+   return address;
+}
+
+unsigned bcm_host_get_peripheral_address(void)
+{
+   unsigned address = get_dt_ranges("/proc/device-tree/soc/ranges", 4);
+   if (address == 0)
+      address = get_dt_ranges("/proc/device-tree/soc/ranges", 8);
+   return address == ~0u ? 0x20000000 : address;
+}
+
+unsigned bcm_host_get_sdram_address(void)
+{
+    unsigned address = get_dt_ranges("/proc/device-tree/axi/vc_mem/reg", 8);
+    return address == ~0u ? 0x40000000 : address;
+}

src/rpi.h

@@ -0,0 +1,3 @@
+unsigned get_dt_ranges(const char *filename, unsigned offset);
+unsigned bcm_host_get_peripheral_address(void);
+unsigned bcm_host_get_sdram_address(void);