diff --git a/document/recommended_setup.md b/document/recommended_setup.md
new file mode 100644
index 0000000..8b17706
--- /dev/null
+++ b/document/recommended_setup.md
@@ -0,0 +1,23 @@
+# NeoNetwork Recommended Setup:
+
+### Part 0: Routing Protocols
+
+* BGP for EGP, the use of MP-BGP is encouraged
+* OSPF for IGP, there's not much reason to use anything else these days, especially with pure software-based solution
+
+### Part 1: Intra-AS (within your own AS) WireGuard configs
+
+* Use IPv4 Link-Local addresses in point-to-point tunnels (such that all internal routing is determined by your IGP of choice)
+* Only IPv6 loopback address is required to run OSPFv3
+* Actual IPv4/IPv6 address for a node should be on a loopback interface
+* Remember to set src addr to node addresses
+
+### Part 2: Inter-AS (tunnels interfacing with other AS) WireGuard configs
+
+* Use Link-Local or Point-to-Point addresses, depending on your (or your peer's) taste
+* Older versions (before 8.5.1) of FRRouting have problems interfacing with BIRD when using Link-Local addresses, choose Point-to-Point in this case
+* Point-to-Point setup requires less config in FRRouting
+
+### Part -1: (Un)Common Pitfalls
+
+* DO NOT RUN IGP ON AN INTERFACE THAT MIGHT CONTAIN PUBLIC IP (This kickstarts route flapping, use MACVLAN to avoid it)