Use av_packet_ref() to reference the packet without copy.
This also simplifies the logic, by making the "offset" variable and the
memcpy() call local to the if-block.
Right click and middle click require the source device to be a mouse,
not a touchscreen. Therefore, the source device was changed only when a
button other than the primary button was pressed (see
adc547fa6e).
However, this led to inconsistencies between the ACTION_DOWN when a
secondary button is pressed (with a mouse as source device) and the
matching ACTION_UP when the secondary button is released (with a
touchscreen as source device, because then there is no button pressed).
To avoid the problem in all cases, force a mouse as source device when
--forward-all-clicks is set.
Concretely, for mouse events in --forward-all-clicks mode:
- device source is set to InputDevice.SOURCE_MOUSE;
- motion event toolType is set to MotionEvent.TOOL_TYPE_MOUSE;
Otherwise (when --forward-all-clicks is unset, or for real touch
events), finger events are injected:
- device source is set to InputDevice.SOURCE_TOUCHSCREEN;
- motion event toolType is set to MotionEvent.TOOL_TYPE_FINGER.
Fixes#3568 <https://github.com/Genymobile/scrcpy/issues/3568>
PR #3579 <https://github.com/Genymobile/scrcpy/pull/3579>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
If the current adb port is not 5555 (typically 0 because it is not in
TCP/IP mode), --tcpip automatically executes (among other commands):
adb tcpip 5555
In case adb was already listening on another port, this command forced
to listen on 5555, and the connection should still succeed.
But this reconfiguration might be inconvenient for the user. If adb is
already in TCP/IP mode, use the current enabled port without
reconfiguration.
Fixes#3591 <https://github.com/Genymobile/scrcpy/issues/3591>
On Windows and macOS, resizing blocks the event loop. Handling it
properly would require the same workaround as done in screen.c.
This reverts commit 436b368f9d.
We must distinguish 3 cases for await_for_server():
- an error occurred
- no error occurred, the device is connected
- no error occurred, the device is not connected (user requested to
quit)
For this purpose, use an additional output parameter to indicate if the
device is connected (only set when no error occurs).
Refs #3085 <https://github.com/Genymobile/scrcpy/pull/3085>
For simplicity, the parsing of `adb devices -l` output is performed in a
single pass on the whole output.
This output was limited to 4096 bytes. Since there are about 100 chars
per device line, this limited the number of connected devices to ~40.
Increase to 65536 bytes to avoid a limitation in practice.
PR #3035 <https://github.com/Genymobile/scrcpy/pull/3035>
All adb commands are executed with an "interruptor", so that they can be
interrupted on Ctrl+C.
Make this interruptor optional, so that we could call "adb kill-server"
in OTG mode. This command always returns almost immediately anyway.
Ideally, we should make all blocking calls interruptible (including
libusb calls, by using the asynchronous API), but it's a lot of work,
and in practice it works well enough.
PR #3011 <https://github.com/Genymobile/scrcpy/pull/3011>
USB device disconnection is detected via a hotplug callback when it is
supported.
In addition, report disconnection on libusb calls returning
LIBUSB_ERROR_NO_DEVICE or LIBUSB_ERROR_NOT_FOUND. This allows to detect
disconnection after a libusb call when hotplug is not available.
PR #3011 <https://github.com/Genymobile/scrcpy/pull/3011>
The value of sc_tick_now() has microsecond precision, but
sc_cond_timedwait() has only millisecond precision.
To guarantee that sc_tick_now() >= deadline when sc_cond_timedwait()
returns due to timeout, round up to the next millisecond.
This avoids to call a non-blocking sc_cond_timedwait() in a loop for no
reason until a target deadline during up to 1 millisecond.
Refs 682a691173
The type uint32_t is not sufficient to store the result of
sc_tick_now().
As a consequence, the FPS counter entered a live loop and caused a lock
starvation (deadlock in practice).
Refs ec871dd3f5
Refs 682a691173
A special PTS value was used to encode a config packet.
To prepare for adding more flags, use the most significant bits of the
PTS field to store flags.
The relative mouse mode is tracked by SDL, and accessible via
SDL_GetRelativeMouseMode().
This is more robust in case SDL changes the relative mouse mode on its
own.
Without this log, the user would have no way to know that a USB device
is rejected because it could not be opened (typically due to
insufficient permissions).
If several devices are connected (as listed by `adb devices`), it was
necessary to provide the explicit serial via -s/--serial.
If only one device is connected via USB (respectively, via TCP/IP), it
might be convenient to select it automatically. For this purpose, two
new options are introduced:
- -d/--select-usb: select the single device connected over USB
- -e/--select-tcpip: select the single device connected over TCP/IP
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Currently, a device is selected either from a specific serial, or if it
is the only one connected.
In order to support selecting the only device connected via USB or via
TCP/IP separately, introduce a new selection structure.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
This does nothing if the adb daemon is already started, but allows to
print any output/errors to the console.
Otherwise, the daemon starting would occur during `adb devices`, which
does not output to the console because the result is parsed.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Since the previous commit, if a serial is given via -s/--serial (either
a real USB serial or an IP:port), a device is selected if its serial
matches exactly.
In addition, if the user pass an IP without a port, then select any
device with this IP, regardless of the port (so that "192.168.1.1"
matches any "192.168.1.1:port"). This is also the default behavior of
adb.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
List all USB devices in a first step, then select the matching one(s).
This allows to report a user-friendly log message containing the list of
devices, with the matching one(s) highlighted.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
