If several devices are connected (as listed by `adb devices`), it was
necessary to provide the explicit serial via -s/--serial.
If only one device is connected via USB (respectively, via TCP/IP), it
might be convenient to select it automatically. For this purpose, two
new options are introduced:
- -d/--select-usb: select the single device connected over USB
- -e/--select-tcpip: select the single device connected over TCP/IP
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Currently, a device is selected either from a specific serial, or if it
is the only one connected.
In order to support selecting the only device connected via USB or via
TCP/IP separately, introduce a new selection structure.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
This does nothing if the adb daemon is already started, but allows to
print any output/errors to the console.
Otherwise, the daemon starting would occur during `adb devices`, which
does not output to the console because the result is parsed.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Before starting the server, the actual device serial (possibly its
ip:port if it's over TCP/IP) must be known.
A serial might be requested via -s/--serial (stored in the
sc_server_params), but the actual serial may change afterwards:
- if none is provided, then it is retrieved with "adb get-serialno";
- if --tcpip is requested, then the final serial will be the target
ip:port.
The requested serial was overwritten by the actual serial in the
sc_server_params struct, which was a bit hacky.
Instead, store a separate serial field in sc_server (and rename the one
from sc_server_params to "req_serial" to avoid confusion).
Now that providing a serial is mandatory for adb commands where it is
relevant, the whole argv array may be built statically, without
allocations at runtime.
The server needs to interrupt the sockets on stop, but it must not close
them while other threads may attempt to read from or write to them.
In particular, the video_socket is read by the stream thread, and the
control_socket is written by the controller and read by receiver.
Therefore, close the socket only on sc_server_destroy(), which is called
after all other threads are joined.
Reported by TSAN on close:
WARNING: ThreadSanitizer: data race (pid=3287612)
Write of size 8 at 0x7ba000000080 by thread T1:
#0 close ../../../../src/libsanitizer/tsan/tsan_interceptors_posix.cpp:1690 (libtsan.so.0+0x359d8)
#1 net_close ../app/src/util/net.c:280 (scrcpy+0x23643)
#2 run_server ../app/src/server.c:772 (scrcpy+0x20047)
#3 <null> <null> (libSDL2-2.0.so.0+0x905a0)
Previous read of size 8 at 0x7ba000000080 by thread T16:
#0 recv ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:6603 (libtsan.so.0+0x4f4a6)
#1 net_recv_all ../app/src/util/net.c:228 (scrcpy+0x234a9)
#2 stream_recv_packet ../app/src/stream.c:33 (scrcpy+0x2045c)
#3 run_stream ../app/src/stream.c:228 (scrcpy+0x21169)
#4 <null> <null> (libSDL2-2.0.so.0+0x905a0)
Refs ddb9396743
Prefix the name of threads by "scrcpy-". This improves readability in
the output of `top -H` for example.
Limit the thread names to 16 bytes, because it is limited on some
platforms.
The sockets were never interrupted or closed by the client since recent
changes to run the server from a dedicated thread (see commit
0426708544).
As a side effect, the server could never terminate properly (it was
waiting on socket blocking calls), so it was always killed by the client
after the WATCHDOG_DELAY.
Interrupt the sockets on stop to give the servera chance to terminate
property, then close them.
If --no-control is enabled, then it is not necessary to create a second
communication socket between the client and the server.
This also facilitates the use of the server alone (without the client)
to receive only the raw video stream.
Expose an option to automatically configure and reconnect the device
over TCP/IP, to simplify wireless connection without using adb
explicitly.
There are two variants:
- If a destination address is provided, then scrcpy connects to this
address before starting. The device must listen on the given TCP port
(default is 5555).
- If no destination address is provided, then scrcpy attempts to find
the IP address of the current device (typically connected over USB),
enables TCP/IP mode, then connects to this address before starting.
PR #2827 <https://github.com/Genymobile/scrcpy/pull/2827>
The options values to configure the server were identified by their
command-line argument index. Now that there are a lot of arguments, many
of them being booleans, it became unreadable and error-prone.
Identify the arguments by a key string instead, and make them optional.
This will also simplify running the server manually for debugging.
In "adb forward" mode, by default, scrcpy connects to localhost:PORT,
where PORT is the local port passed to "adb forward". This assumes that
the tunnel is established on the local host with a local adb server
(which is the common case).
For advanced usage, add --tunnel-host and --tunnel-port to force the
connection to a different destination.
Fixes#2801 <https://github.com/Genymobile/scrcpy/issues/2801>
PR #2807 <https://github.com/Genymobile/scrcpy/pull/2807>
Signed-off-by: Romain Vimont <rom@rom1v.com>
This allows to execute all adb commands with the specific -s parameter,
even if it is not provided by the user.
In practice, calling adb without -s works if there is exactly one device
connected. But some adb commands (for example "adb push" on drag & drop)
could be executed after another device is connected, so the actual
device serial must be known.
The interruptible version of the function to check process success
(sc_process_check_success_intr()) did not accept a close parameter to
avoid a race condition. But as the result, the processes were not closed
at all.
Add a close parameter, and close the process separately to avoid the
race condition.
Interrupt any blocking call on process terminated, like on
server_stop().
This allows to interrupt any blocking accept() with correct
synchronization without additional complexity.
Define server callbacks, start the server asynchronously and listen to
connection events to initialize scrcpy properly.
It will help to simplify the server code, and allows to run the UI event
loop while the server is connecting. In particular, this will allow to
receive SIGINT/Ctrl+C events during connection to interrupt immediately.
Currently, server_stop() is called from the same thread as
server_connect_to(), so interruption may never happen.
This is a step to prepare executing the server from a dedicated thread.
