Commit graph

805 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
048c2f0e8c OSPF: Fix formatting of 'show ospf neighbors'
The formatting was broken when too short router-id was used.
2019-07-23 17:02:41 +02:00
Ondrej Zajicek (work)
cf7ff99513 BFD: Support for VRFs
Allow multiple BFD instances in separate VRFs, dispatch BFD requests
according to VRFs.

Thanks to Alexander Zubkov for notice and patches.
2019-07-17 16:20:35 +02:00
Ondrej Zajicek (work)
1aec7112f7 OSPF: Fix handling of NSSA option flags
Per RFC 3101, N-bit signalling NSSA support should be used only in Hello
packets, not in DBDES packets. BIRD since 2.0.4 verifies N-bit in
neighbor structure, which is learned from DBDES packets, therefore
NSSA-LSAs are not propagated to proper implementations of RFC 3101.

This patch fixes that. Both removing the check and removing N-bit from
DBDES packet. This will fix compatibility issues with proper
implementations, but causes compatibility issues with BIRD 2.0.4.
2019-07-10 18:25:36 +02:00
Ondrej Zajicek (work)
deb84d7989 OSPF: Minor fix in graceful restart
Most LSA origination is blocked in ospf_update_topology(), this fix
blocks LSA origination from ospf_rt_spf().
2019-07-09 15:57:46 +02:00
Ondrej Zajicek (work)
2872ab927e OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.

(recommiting, was reset by the previous commit)
2019-07-09 03:48:02 +02:00
Ondrej Zajicek (work)
85840d4c03 OSPF: Fix handling of external routes on graceful restart
We need to flush learned external LSAs a bit later than other LSAs (after
first feed after end of the graceful restart) to avoid flap of external
routes.
2019-07-09 03:39:19 +02:00
Ondrej Zajicek (work)
fa1e0ba354 OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.
2019-07-04 13:34:42 +02:00
Ondrej Zajicek (work)
1a2ad348f6 OSPF: Support for graceful restart
Implement OSPFv2 (RFC 3623) and OSPFv3 (RFC 5187) graceful restart,
for both restarting and helper sides. Graceful restart is initiated
by 'graceful down' command.
2019-06-30 21:30:41 +02:00
Ondrej Zajicek (work)
6ff8119765 OSPFv3: Fix some overlooked cases in IPv4 mode
Prefixes with max length (/32) were not handled properly.

Thanks to bauen1 for the bugreport.
2019-04-12 14:11:23 +02:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Ondrej Zajicek (work)
9aa77fcceb OSPF: Improved handling of tmpattrs
Keep track of whether OSPF tmpattrs are actually defined for given route
(using flags in rte->pflags). That makes them behave more like real
eattrs so a protocol can define just a subset of them or they can be
undefined by filters.

Do not set ospf_metric2 for other than type 2 external OSPF routes and do
not set ospf_tag for non-external OSPF routes. That also fixes a bug
where internal/inter-area route propagated from one OSPF instance to
another is initiated with infinity ospf_metric2.

Thanks to Yaroslav Dronskii for the bugreport.
2019-03-06 18:28:00 +01:00
Ondrej Zajicek (work)
bf8d7bba9e OSPF: Reset LSAs during area type change
When area is reconfigured to a different type, we need to flush LSAs as
they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we
have have just one OSPF area and that changes type, we could restart OSPF
as there is no state to keep anyway. That solves issue with different
handling of external routes exported to OSPF based of main area type.
2019-02-17 01:54:01 +01:00
Ondrej Zajicek (work)
4a3f5b3617 OSPF: Basic support for DN-bit handling (RFC 4576)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are
marked by DN flag and they are ignored by other OSPF routers with VPN-PE
enabled.
2019-02-13 15:53:36 +01:00
Ondrej Zajicek (work)
1e958e52d3 OSPF: Do not originate Router-Information LSA
As we do not have much usage for it yet.
2019-02-09 16:15:01 +01:00
Ondrej Zajicek (work)
a9b97cbcb7 OSPF: Send direct acknowledgements as unicast
Direct acknowledgements should be send as unicast to a corresponding
neighbor. Only delayed acks should be send as multicast to all/designated
routers.
2019-02-03 20:22:40 +01:00
Ondrej Zajicek (work)
16605f2fda OSPF: Reject duplicate DBDES packets after dead interval
Master may free last DBDES packet immediately. Slave must wait dead
interval before freeing last DBDES packet and then reject duplicate
DBDES packets with SeqNumberMismatch.
2019-02-03 17:31:27 +01:00
Ondrej Zajicek (work)
9c94583a3d OSPF: DD seqnum should be initialized only for first attempts
After SeqNumberMismatch/BadLSReq, we should continue with the old
seqnum++. The old code tries to do that by n->adj, but it was set
nowhere.
2019-02-03 16:20:37 +01:00
Ondrej Zajicek (work)
267da8138d OSPF: Reject DBDES packets with non-matching MTU
As it is specified in RFC 2328. The old code just provided warning.
2019-02-03 15:45:43 +01:00
Ondrej Zajicek (work)
1c730ee761 Doc: Remove doc for already removed option 2019-01-26 20:44:37 +01:00
Ondrej Zajicek (work)
5a50a98980 OSPF: Opaque LSAs and Router Information LSA
Add support for OSPFv2 Opaque LSAs (RFC 5250) and for Router Information
LSA (RFC 7770). The second part is here mainly for testing opaque LSAs.
2019-01-24 22:45:27 +01:00
Ondrej Zajicek (work)
cea2e25f41 OSPF: Fix wrong LSA collisions detection
In some circumstances (old LSA flushed but not acknowledged and not
removed) origination of a new LSA may wrongly triggers LSA collision
code. The patch fixes that.

Thanks to Asbjorn Mikkelsen for the bugreport and @mdelagueronniere
for the original patch.
2018-12-17 17:01:08 +01:00
Ondrej Zajicek (work)
3a2a3c7325 Doc: Rename code documentation files back to Doc 2018-12-14 02:03:42 +01:00
Ondrej Zajicek (work)
0f40405fc9 Update RFC references
Progdoc comments do not allow SGML tags
2018-12-12 16:38:30 +01:00
Ondrej Zajicek (work)
baeacdcfd3 OSPF: Fix reconfiguration of vlinks
Fix crash during reconfiguration of OSPF config with vlinks. When vlink
is reconfigured, a generic iface-reconfiguration code is used, which in
one place supposes that it is running on a regular iface.

Thanks to Cybertinus for a bugreport.
2018-12-10 02:15:06 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
0ac9cb2c1f OSPF: Fix some trace messages
Missing argument in MTU change trace message can crash bird when MTU
change happens and trace messages are active.

Thanks to Alexander Velkov for the bugreport.
2018-10-25 17:22:37 +02:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Jan Maria Matejka
d4cebc6bbe No more warnings ...
no more warnings
No more warnings over me
And while it is being compiled all the log is black and white
Release BIRD now and then let it flee

(use the melody of well-known Oh Freedom!)
2018-09-18 14:21:11 +02:00
Ondrej Zajicek (work)
8bd718b3ba OSPF: Fix crash during route removal
The bug was introduced by an earler patch which removed additional eattr
argument to rt_notify hook.
2018-07-19 20:48:13 +02:00
Ondrej Zajicek (work)
7b9b0c0a00 Cleanup some warnings 2018-07-03 18:08:35 +02:00
Ondrej Zajicek (work)
586c1800c4 Nest: Neighbor cache cleanups
Simplify neighbor cache code, fix several minor bugs, and improve
handling of ONLINK flag.
2018-06-27 16:57:07 +02:00
Maria Matejka
c2fc4c10ac Doc: renamed progdoc files Doc -> progdoc to fix collision with doc/ folder on case-insensitive filesystems 2018-06-26 17:09:12 +02:00
Jan Maria Matejka
f851f0d7e3 Config: Dropping CF_ADDTO. 2018-06-26 14:29:03 +02:00
Jan Maria Matejka
1ef23f05ee Merge branch 'int-new' into HEAD 2018-06-19 14:32:16 +02:00
Jan Maria Matejka
13c0be19d3 Nest: Removing separate tmpa from route propagation
This is a fundamental change of an original (1999) concept of route
processing inside BIRD. During import/export, there was a temporary
ea_list created which was to be used instead of the another one inside
the route itself.

This led to some confusion, quirks, and strange filter code that handled
extended route attributes. Dropping it now.

The protocol interface has changed in an uniform way -- the
`struct ea_list *attrs` argument has been removed from store_tmp_attrs(),
import_control(), rt_notify() and get_route_info().
2018-05-30 17:08:49 +02:00
Ondrej Zajicek (work)
18b4f2082c OSPF: Fix invalid NSSA RFC references 2018-05-29 14:23:14 +02:00
Jan Maria Matejka
ee7e2ffd26 Protocol: Introducing an enum protocol_class
This supersedes the EAP_* constants.
2018-05-29 12:35:06 +02:00
Ondrej Zajicek (work)
feae132e0f Do not initialize route metrics in import_control hook
During route export, the receiving protocol often initialized route
metrics to default value in its import_control hook before export filter
was executed. This is inconsistent with the expectation that an export
filter would process the same route as one in the routing table and it
breaks setting these metrics before (e.g. for static routes directly in
static protocol).

The patch removes the initialization of route metrics in import_control
hook, the default values are already handled in rt_notify hook called
after export filters.

The patch also changed the behavior of OSPF to keep metrics when a route
is reannounced between OSPF instances (to be consistent with other
protocols) and the behavior when both ospf_metric1 and ospf_metric2
are specified (to have more expected behavior).
2018-05-24 14:51:05 +02:00
Ondrej Zajicek (work)
4727d1db9d OSPF: Support of authentication trailer for OSPFv3
Implement RFC 7166, crypthographic authentication for OSPFv3
analogous to authentication used for OSPFv2.
2018-04-25 15:54:53 +02:00
Ondrej Zajicek (work)
72163bd5f3 Nest: Allow modification of channels inherited from templates
Multiple definitions of same channels are forbidden, but inherited
channel can be redefined. In such case channel options are merged.
2018-01-09 18:42:22 +01:00
Ondrej Zajicek (work)
e87a95d97d Minor fixes for debug mode 2017-12-16 16:31:43 +01:00
Ondrej Zajicek (work)
7fc55925be Several minor fixes 2017-12-10 00:55:34 +01:00
Ondrej Zajicek (work)
517d05dff1 Enable ECMP and Link detection by default
ECMP is not enabled on BSD, where it is not supported by BIRD.
2017-12-08 16:00:33 +01:00
Ondrej Zajicek (work)
46434a3cad Merge commit '7b2c5f3d2826e3175bf31b1c36056c9efc587a2b' into int-new 2017-12-07 18:35:46 +01:00
Ondrej Zajicek (work)
a6f79ca57f Timers: Revert temporary names and remove old timer.h 2017-12-07 13:54:59 +01:00
Ondrej Zajicek (work)
574b232427 Timers: Fix TBF and some last remains 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
cc881bd155 BGP: Update to new timers 2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
b32d557a6e OSPF: Update to new timers
Note that recurrent timers are currently limited to ~1 hour.
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
d3fa9e84e9 Timers: Show sub-second times in some protocol outputs 2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
025525266f Timers: Replace old timers with microsecond timers
The old timer interface is still kept, but implemented by new timers. The
plan is to switch from the old inteface to the new interface, then clean
it up.
2017-12-07 13:49:27 +01:00