Commit graph

1539 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
dc8d9dec4a OSPF: Skip out-of-state packets earlier
Sometimes multicast OSPF packet is received when neighbor adjacency is
not established. Such packet should be ignored earlier in packet
processing as otherwise it causes strange error messages when OSPFv3
authentication is enabled.
2020-08-12 19:42:44 +02:00
Ondrej Zajicek (work)
c26c6bc2d7 Show info from multiple protocols when protocol is not specified
Most commands like 'show ospf neighbors' fail when protocol is not
specified and there are multiple instances of given protocol type.
This is annoying in BIRD 2, as many protocols have IPv4 and IPv6
instances. The patch changes that by showing output from all protocol
instances of appropriate type.

Note that the patch also removes terminating cli_msg() call from these
commands and moves it to the common iterating code.
2020-06-28 15:38:47 +02:00
Ondrej Zajicek (work)
82937b465b OSPF: Fix bad header length test
Thanks to Slava Aseev for the thorough bugreport.
2020-06-10 13:27:14 +02:00
Kazuki Yamaguchi
19f8f17320 RPKI: Fix unnecessary reconnection on reconfiguration
Compare the new timing parameters with the old configuration, not with
the temporary state of the current connection.

The timing values in struct rpki_cache is updated by a version 1 End Of
Data PDU, unless this behavior is suppressed by the configuration
explicitly by the "keep" keyword. Consequently, every reconfiguration
of BIRD triggers a reconnection even if it is not necessary.
2020-06-03 15:05:35 +02:00
Maria Matejka
eee8af4db2 OSPF: setting list node to zero before enlisting 2020-06-02 16:58:06 +02:00
Ondrej Zajicek (work)
4e8f8afc68 Babel: Set onlink flag for IPv4 routes with unreachable next hop
If the next hop of a route is not a reachable address, the route should be
installed as onlink. This enables a configuration common in mesh networks
where the mesh interface is assigned a /32 and babel handles the routing by
installing onlink routes.

Thanks to Toke Hoiland-Jorgensen for the patch.
2020-05-26 23:43:13 +02:00
Ondrej Zajicek (work)
c1632ad0f3 OSPF: Fix handling of unnumbered PtPs
This issue has a long history. In 2012, we changed data field for
unnumbered PtP links from iface id (specified by RFC) to IP address based
on reports of bugs in Quagga that required it, and we used out-of-band
information to distinquish unnumberred PtPs with the same local IP
address.

Then with OSPF graceful restart implementation, we found that we can no
longer use out-of-band information, and we need to use only LSAdb info
for routing table calculation, but i forgot to finish handling of this
case, so multiple unnumbered PtPs with the same local IP addresses were
broken.

Considering that even recent Mikrotik RouterOS has broken next hop
calculation that depends on IP address in PtP link data field, we
cannot just switch back to the iface id for unnumbered PtP links.

The patch makes two changes: First, it goes back to use out-of-band
(position) info for distinguishing local interfaces in SPF when graceful
restart is not enabled, while still uses LSAdb-only approach for SPF
calculation when graceful restart is enabled.

Second, it adds OSPF interface option 'ptp address', which controls
whether IP address or iface id is used in data field. It is enabled
by default except for unnumbered PtP links with enabled graceful
restart.

Thanks to Kenth Eriksson for the bugreport and Joakim Tjernlund for
suggestions.
2020-05-26 18:21:43 +02:00
Ondrej Zajicek (work)
b729e731f9 RIP: Triggered RIP (demand circuit) documentation 2020-05-19 02:42:22 +02:00
Ondrej Zajicek (work)
5fc8407177 RIP: Fix handling of passive mode for demand circuit interfaces 2020-05-12 03:46:47 +02:00
Maria Matejka
048eb2ddf1 Merge remote-tracking branch 'origin/mq-static-analysis' 2020-05-01 15:34:17 +02:00
Maria Matejka
258be56539 Nest: Added const to ea_show just to declare that this shouldn't really change anything 2020-05-01 15:19:12 +02:00
Maria Matejka
a7d9b8f116 OSPF: Zero-initialization of a temporary neighbor 2020-05-01 15:19:12 +02:00
Maria Matejka
5f60d14ede RPKI: fixed rare va_list leak 2020-05-01 15:19:12 +02:00
Maria Matejka
9e64ac4b7c OSPF: Adding a note about a static analyzer result. 2020-05-01 15:19:12 +02:00
Maria Matejka
dccee40826 OSPF: variable-length array of size 0 replaced by alloca()'d pointer
NULL pointer is safer than a random pointer onto stack if this function
gets changed and eventually broken.
2020-05-01 15:19:12 +02:00
Ondrej Zajicek (work)
17de3a023f BGP: Fix handling of strange IPv6 link-local-only next hops
There are three common ways how to encode IPv6 link-local-only next hops:
(:: ll), (ll), and (ll ll). We use the first one but we should accept all
three. The patch fixes handling of the last one.

Thanks to Sebastian Hahn for the bugreport.
2020-04-29 02:50:29 +02:00
Maria Matejka
d607205486 Not calling memcpy with n=0. 2020-04-28 16:21:06 +02:00
Nasato Goto
a6548d5b5b BGP: Fix handling of 16bit-only ASN translation
The bug generated invalid AGGREGATOR attribute during translation of
32bit ASN to 16bit-only BGP peer. The patch fixes that.
2020-04-15 03:46:53 +02:00
Maria Matejka
fd9f0c0640 Configuration strings are constant.
This is merely a const propagation. There was no problem in there.
2020-04-09 15:37:14 +02:00
Ondrej Zajicek (work)
d516c68ad8 RIP: Improvements to demand circuit mode
Restart iface after changing demand circuit mode during reconfiguration.
Fix next_regular interval reset during reconfiguration. Send flushing
response when iface goes down.
2020-03-14 17:04:49 +01:00
Maria Matejka
dc042d87cb Perf: changed route update pattern to be more like common protocols 2020-03-12 09:26:05 +01:00
Ondrej Zajicek (work)
78e4a123bb BGP: Handle flowspec rules without dst part
The RFC 5575 does not explicitly reject flowspec rules without dst part,
it just requires dst part in validation procedure for feasibility, which
we do not implement anyway. Thus flow without dst prefix is syntactically
valid, but unfeasible (if feasibilty testing is done).

Thanks to Alex D. for the bugreport.
2020-03-03 17:45:16 +01:00
Ondrej Zajicek (work)
757cab18d6 BGP: Support for MD5SIG together with remote range
When dynamic BGP with remote range is configured, MD5SIG needs to use
newer socket option (TCP_MD5SIG_EXT) to specify remote addres range for
listening socket.

Thanks to Adam Kułagowski for the suggestion.
2020-02-27 17:29:17 +01:00
Ondrej Zajicek (work)
22c3cf955d RIP: Demand circuit support (RFC 2091) 2020-02-21 02:35:50 +01:00
Ondrej Zajicek (work)
3343088a71 RIP: Fix crash when interface is removed
Recent changes in neighbor code caused RIP to access neighbor field which
is NULL during interface/neighbor removal and caused crash when debug
messages are enabled. Use correct field to get iface from neighbor.
2020-02-14 22:43:27 +01:00
Maria Matejka
027a3e66f7 RPKI: Allow build without libSSH 2020-02-04 10:15:35 +01:00
Ondrej Zajicek (work)
7f9adafc10 BFD: Option to specify which class of BFD sessions are accepted
Allows to configure IPv4/IPv6-only or direct/multihop-only BFD protocol
instances.
2020-01-28 18:07:25 +01:00
Ondrej Zajicek (work)
9f2670277c OSPF: Fix bad initialization of tx_hdrlen field
Function ifa_tx_hdrlen() uses fields autype and passwords, so it must be
called after these are set.

Thanks to Kenth Eriksson for the bugreport.
2020-01-09 03:02:15 +01:00
Ondrej Zajicek (work)
21d09632a5 BGP: Add some statistics
Add some statistic counters to BGP consistent with BGP MIB (RFC 4273),
including persistent 'FSM established transitions'.
2019-12-03 18:05:41 +01:00
Ondrej Zajicek (work)
0f88200247 BGP: Fix processing of IPv6 Flowspec
During NLRI parsing of IPv6 Flowspec, dst prefix was not properly
extracted from NLRI, therefore a received flow was stored in a different
position in flowspec routing table, and was not reachable by command
'show route <flow>'.

Add proper prefix part accessors to flowspec code and use them from BGP
NLRI parsing code.

Thanks to Alex D. for the bugreport.
2019-11-18 17:56:51 +01:00
Ondrej Zajicek (work)
0b228fca04 BGP: Add option to enforce first AS in AS_PATH
This is optional check described in RFC 4271. Although this can be also
done by filters, it is widely implemented option in BGP implementations.

Thanks to Eugene Bogomazov for the original patch.
2019-11-10 02:06:07 +01:00
Ondrej Zajicek (work)
a52476c9be BGP: Add option to reject AS_SETs
There is a pending draft to make them obsolete
2019-11-04 22:09:35 +01:00
Ondrej Zajicek (work)
be7c1aef42 BGP: RFC 8654 got released 2019-10-26 01:32:24 +02:00
Ondrej Zajicek (work)
ec331acf48 BGP: Fix handling of transitive extended communities
Transitive extended communities should be removed on external sessions,
the old code them in all cases.

Thanks to Jean-Daniel Pauget for the original patch.
2019-10-24 17:50:19 +02:00
Ondrej Zajicek (work)
4e23b49969 RPKI: Fix handling of IPv6 cache addresses
The old code used just sizeof(struct sockaddr) bytes of IP address.
2019-10-19 03:39:07 +02:00
Ondrej Zajicek (work)
6c9cda6f92 BGP: Fix reconfiguration with import table
Change of some options requires route refresh, but when import table is
active, channel reload is done from it instead of doing full route
refresh. So in this case we request it internally.
2019-10-10 23:33:40 +02:00
Ondrej Zajicek (work)
09ee846d92 BGP: AIGP metric support (RFC 7311) 2019-10-09 17:53:23 +02:00
Ondrej Zajicek (work)
759b204be3 Lib: Support for 64-bit numbers in bvsnprintf()
Use 'l' for s64/u64 instead of for long/ulong, as that is much more
useful. Also make number() correct with regard to signed/unsigned
typecasts.
2019-10-09 17:53:23 +02:00
Maria Matejka
6dda6931d1 Perf: allow testing with cached route attributes. 2019-10-09 17:47:14 +02:00
Ondrej Zajicek (work)
4821251ebb BFD: Fix reconfiguration of neighbors
The bfd_reconfigure_neighbors() returned after first reconfigured
neighbor instead of continuing with the next one.

Thanks to Winston Chen for the bugreport and a patch.
2019-09-30 19:10:14 +02:00
Ondrej Zajicek (work)
eb1e43a9af BGP: Fix setup with multiple dynamic BGP ranges
Based on a patch from Liam Nattrass, thanks.
2019-09-17 14:45:14 +02:00
Ondrej Zajicek (work)
1127887a8b BGP: Fix handling of bgp_aggregator atttribute
The attribute should not be modifiable by filters as we do not
support its type.
2019-09-09 13:17:30 +02:00
Ondrej Zajicek (work)
8388f5a7e1 BGP: Fix bugs in handling of shutdown messages
There is an improper check for valid message size, which may lead to
stack overflow and buffer leaks to log when a large message is received.

Thanks to Daniel McCarney for bugreport and analysis.
2019-09-09 03:13:35 +02:00
Ondrej Zajicek (work)
56d8b1e7f6 OSPF: Fix 'show ospf lsadb' cmd without proto arg
It crashed when used without protocol argument.

Thanks to Alexander for the bugreport.
2019-08-29 20:58:16 +02:00
Ondrej Zajicek (work)
4fa0e472cf BGP: Use reallocation for capability structure
Instead of having large stack buffer for max amount of AFI/SAFI pairs.
The old code is not correct w.r.t. extendeded option length, as more
AFI/SAFI pairs may fit into the capability option.
2019-08-21 17:16:08 +02:00
Ondrej Zajicek (work)
524d253853 BGP: Implement extended optional parameters length
Extends BGP options/capabilities data length to 16bit, to avoid issues
with too many capabilities. See draft-ietf-idr-ext-opt-param-07
2019-08-20 19:15:50 +02:00
Ondrej Zajicek (work)
b7d7599ce3 BGP: implement Adj-RIB-Out
The patch implements optional internal export table to a channel and
hooks it to BGP so it can be used as Adj-RIB-Out. When enabled, all
exported (post-filtered) routes are stored there. An export table can be
examined using e.g. 'show route export table bgp1.ipv4'.
2019-08-14 06:02:33 +02:00
Ondrej Zajicek (work)
70a4320bdd RAdv: Allow solicited RAs to be sent as unicast
Add option to send solicited router advertisements as unicast directly
to soliciting nodes instead of as multicast to all-nodes group.
2019-08-12 00:43:19 +02:00
Ondrej Zajicek (work)
e2b530aa72 BGP: Improve reconfiguration
Several BGP channel options (including 'next hop self') could be
reconfigured without session reset, with just route refeed/refresh.
The patch improves reconfiguration code to do it that way.
2019-08-06 15:29:06 +02:00
Ondrej Zajicek (work)
f6a6a77640 BGP: Fix 'deterministic med' to work with 'merge paths'
The 'deterministic med' option is implemented by suppressing other than
best-in-group routes (grouped by ASN) from best route selection. This
interferes with 'merge paths' as supressed routes are no longer mergable
with best route. This is fixed by suppressing only those routes that are
not mergable with best-in-group route.
2019-08-06 15:09:42 +02:00
Vincent Bernat
3b62417c35 RPKI: Fix allocation of hostname when using an IPv6 address 2019-07-29 15:42:30 +02:00
Ondrej Zajicek (work)
00284f0ed6 BFD: Fix formatting of 'show bfd sessions'
The formatting was broken due to longer date in 'since' column.
2019-07-25 14:24:16 +02:00
Ondrej Zajicek (work)
cec40a7467 Merge remote-tracking branch 'origin/mq-filter-stack' 2019-07-24 15:38:32 +02:00
Ondrej Zajicek (work)
18f70a6229 Nest: VRF of protocol can be explicitly specified as 'default'
Protocol can have specified VRF, in such case it is restricted to a set
of ifaces associated with the VRF, otherwise it can use all interfaces.

The patch allows to specify VRF as 'default', in which case it is
restricted to a set of iface not associated with any VRF.
2019-07-24 15:08:03 +02:00
Ondrej Zajicek (work)
048c2f0e8c OSPF: Fix formatting of 'show ospf neighbors'
The formatting was broken when too short router-id was used.
2019-07-23 17:02:41 +02:00
Ondrej Zajicek (work)
15b0a92294 RPKI: Fix reconfiguration when ssh parameters are undefined 2019-07-23 01:52:18 +02:00
Ondrej Zajicek (work)
cf7ff99513 BFD: Support for VRFs
Allow multiple BFD instances in separate VRFs, dispatch BFD requests
according to VRFs.

Thanks to Alexander Zubkov for notice and patches.
2019-07-17 16:20:35 +02:00
Maria Matejka
8263690e75 Merge remote-tracking branch 'origin/master' into mq-filter-stack 2019-07-15 16:07:16 +02:00
Ondrej Zajicek (work)
1aec7112f7 OSPF: Fix handling of NSSA option flags
Per RFC 3101, N-bit signalling NSSA support should be used only in Hello
packets, not in DBDES packets. BIRD since 2.0.4 verifies N-bit in
neighbor structure, which is learned from DBDES packets, therefore
NSSA-LSAs are not propagated to proper implementations of RFC 3101.

This patch fixes that. Both removing the check and removing N-bit from
DBDES packet. This will fix compatibility issues with proper
implementations, but causes compatibility issues with BIRD 2.0.4.
2019-07-10 18:25:36 +02:00
Maria Matejka
b2a4feeb4c Merge branch 'master' into mq-filter-stack 2019-07-10 11:27:08 +02:00
Ondrej Zajicek (work)
deb84d7989 OSPF: Minor fix in graceful restart
Most LSA origination is blocked in ospf_update_topology(), this fix
blocks LSA origination from ospf_rt_spf().
2019-07-09 15:57:46 +02:00
Ondrej Zajicek (work)
2872ab927e OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.

(recommiting, was reset by the previous commit)
2019-07-09 03:48:02 +02:00
Ondrej Zajicek (work)
85840d4c03 OSPF: Fix handling of external routes on graceful restart
We need to flush learned external LSAs a bit later than other LSAs (after
first feed after end of the graceful restart) to avoid flap of external
routes.
2019-07-09 03:39:19 +02:00
Ondrej Zajicek (work)
fa1e0ba354 OSPF: Update DR when local priority changes
When priority is reconfigured locally, we need to trigger DR election.
2019-07-04 13:34:42 +02:00
Maria Matejka
eac9250fd5 Merge branch 'master' into mq-filter-stack 2019-07-03 11:12:25 +02:00
Maria Matejka
78976974e7 Dynamic attributes definition split whether it is bitmask or not. 2019-07-03 00:00:11 +02:00
Maria Jan Matejka
026bfedb33 BGP: Prefix hash is too small, increase its max size.
This doesn't make any change for you until you have
millions of updates waiting to be sent. Increasing
the max hash size from 2^20 to 2^24.
2019-07-01 09:05:54 +02:00
Maria Jan Matejka
9dac814ee8 BGP: split tx explicitly
If BGP has too many data to send and BIRD is slower than the link, TX is
always possible until all data is sent. This patch limits maximum number
of generated BGP messages in one iteration of TX hook.
2019-07-01 09:05:50 +02:00
Ondrej Zajicek (work)
1a2ad348f6 OSPF: Support for graceful restart
Implement OSPFv2 (RFC 3623) and OSPFv3 (RFC 5187) graceful restart,
for both restarting and helper sides. Graceful restart is initiated
by 'graceful down' command.
2019-06-30 21:30:41 +02:00
Ondrej Zajicek (work)
8a68316eb9 Nest: Add command to request graceful restart
When 'graceful down' command is entered, protocols are shut down
with regard to graceful restart. Namely Kernel protocol does
not remove routes and BGP protocol does not send notification,
just closes the connection.
2019-06-30 21:29:24 +02:00
Ondrej Zajicek (work)
d35fb9d732 BGP: Fix bug introduced in one of last patches 2019-06-12 16:37:12 +02:00
Jan Maria Matejka
23e3b1e665 Filter: Some people can't pronounce "postfixify" correctly. Let's try "linearize" instead.
This is just a naming change.
2019-05-22 15:20:02 +00:00
Maria Matejka
9eef9c648c Lexer now returns known sym / unknown sym / keyword 2019-05-17 22:26:21 +02:00
Alexander Azimov
7ff34ca2cb BGP: Compliance with RFC8203bis 2019-04-30 13:55:43 +02:00
Ondrej Zajicek (work)
0b1e1e1a00 BGP: Output Local AS number in show protocol
Useful for implementation of agents implementing the SNMP-BGP MIB, which
requires the local AS of a session to be specified.

Thanks to Jan-Philipp Litza for the patch.
2019-04-30 13:44:11 +02:00
Ondrej Zajicek (work)
e0835db4f1 BGP: Dynamic BGP
Support for dynamically spawning BGP protocols for incoming connections.
Use 'neighbor range' to specify range of valid neighbor addresses, then
incoming connections from these addresses spawn new BGP instances.
2019-04-30 13:32:39 +02:00
Ondrej Zajicek (work)
6ff8119765 OSPFv3: Fix some overlooked cases in IPv4 mode
Prefixes with max length (/32) were not handled properly.

Thanks to bauen1 for the bugreport.
2019-04-12 14:11:23 +02:00
Ondrej Zajicek (work)
4a50c8bd03 BGP: Handle corner cases in event ordering
When BGP connection is opened, it may happen that rx hook (with remote
OPEN) is called before tx hook (for local OPEN). Therefore, we need to do
internal changes (like setting local_caps) synchronously with OPENSENT
transition and we need to ensure that OPEN is sent before KEEPALIVE.
2019-04-08 16:56:56 +02:00
Ondrej Zajicek (work)
23ee6b1cd6 BGP: Promiscuous ASN mode
Allow to specify just 'internal' or 'external' for remote neighbor
instead of specific ASN. In the second case that means BGP peers with
any non-local ASNs are accepted.
2019-04-03 15:54:50 +02:00
Ondrej Zajicek (work)
a22c3e5968 BGP: Separate runtime and config usage of local/remote ip and as fields 2019-04-02 17:22:31 +02:00
Ondrej Zajicek (work)
3c3605818f BGP: Mandatory option for channels
Allow to mark channel to be mandatory, and do not allow BGP sessions if
no common AFI/SAFI is established.
2019-03-19 17:44:50 +01:00
Ondrej Zajicek (work)
7e5f769d91 BGP: Handle case where capabilites are not used
If peer does not announce capabilities at all, or when we have
capabilities disabled, handle that as implicit IPv4 unicast.
2019-03-18 14:29:12 +01:00
Maria Matejka
8d65add626 Merge branch 'master' into HEAD 2019-03-18 12:54:40 +01:00
Maria Matejka
2f02c25e36 Perf: fixed stupid allocation bug 2019-03-15 16:34:26 +01:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Ondrej Zajicek (work)
9aa77fcceb OSPF: Improved handling of tmpattrs
Keep track of whether OSPF tmpattrs are actually defined for given route
(using flags in rte->pflags). That makes them behave more like real
eattrs so a protocol can define just a subset of them or they can be
undefined by filters.

Do not set ospf_metric2 for other than type 2 external OSPF routes and do
not set ospf_tag for non-external OSPF routes. That also fixes a bug
where internal/inter-area route propagated from one OSPF instance to
another is initiated with infinity ospf_metric2.

Thanks to Yaroslav Dronskii for the bugreport.
2019-03-06 18:28:00 +01:00
Maria Matejka
0b39b1cbb7 Conf: Symbol implementation converted from void pointers to union
... and consted some declarations.
2019-02-20 22:30:55 +01:00
Maria Matejka
4f082dfa89 Filter: merged filter instruction constructors, counting line size on instruction construct 2019-02-20 22:30:54 +01:00
Maria Matejka
c0e958e022 Filter + Config: Fix bugs, tests and split symbols by type 2019-02-20 22:30:54 +01:00
Maria Matejka
9b46748d5b Filter: refactoring of instruction constructors 2019-02-20 22:30:54 +01:00
Maria Matejka
4c553c5a5b Filter refactoring: dropped the recursion from the interpreter
This is a major change of how the filters are interpreted. If everything
works how it should, it should not affect you unless you are hacking the
filters themselves.

Anyway, this change should make a huge improvement in the filter performance
as previous benchmarks showed that our major problem lies in the
recursion itself.

There are also some changes in nest and protocols, related mostly to
spreading const declarations throughout the whole BIRD and also to
refactored dynamic attribute definitions. The need of these came up
during the whole work and it is too difficult to split out these
not-so-related changes.
2019-02-20 22:30:54 +01:00
Ondrej Zajicek (work)
bf8d7bba9e OSPF: Reset LSAs during area type change
When area is reconfigured to a different type, we need to flush LSAs as
they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we
have have just one OSPF area and that changes type, we could restart OSPF
as there is no state to keep anyway. That solves issue with different
handling of external routes exported to OSPF based of main area type.
2019-02-17 01:54:01 +01:00
Ondrej Zajicek (work)
4a3f5b3617 OSPF: Basic support for DN-bit handling (RFC 4576)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are
marked by DN flag and they are ignored by other OSPF routers with VPN-PE
enabled.
2019-02-13 15:53:36 +01:00
Ondrej Zajicek (work)
1e958e52d3 OSPF: Do not originate Router-Information LSA
As we do not have much usage for it yet.
2019-02-09 16:15:01 +01:00
Ondrej Zajicek (work)
cd16538fc9 Merge remote-tracking branch 'origin/mq-opt' 2019-02-09 15:53:16 +01:00
Ondrej Zajicek (work)
a9b97cbcb7 OSPF: Send direct acknowledgements as unicast
Direct acknowledgements should be send as unicast to a corresponding
neighbor. Only delayed acks should be send as multicast to all/designated
routers.
2019-02-03 20:22:40 +01:00
Ondrej Zajicek (work)
16605f2fda OSPF: Reject duplicate DBDES packets after dead interval
Master may free last DBDES packet immediately. Slave must wait dead
interval before freeing last DBDES packet and then reject duplicate
DBDES packets with SeqNumberMismatch.
2019-02-03 17:31:27 +01:00
Ondrej Zajicek (work)
9c94583a3d OSPF: DD seqnum should be initialized only for first attempts
After SeqNumberMismatch/BadLSReq, we should continue with the old
seqnum++. The old code tries to do that by n->adj, but it was set
nowhere.
2019-02-03 16:20:37 +01:00
Ondrej Zajicek (work)
267da8138d OSPF: Reject DBDES packets with non-matching MTU
As it is specified in RFC 2328. The old code just provided warning.
2019-02-03 15:45:43 +01:00
Maria Matejka
f9b97f1c62 Perf: Added forgotten all-protocol options 2019-02-01 14:09:01 +01:00