Commit graph

242 commits

Author SHA1 Message Date
Ondrej Zajicek (work)
1a2ad348f6 OSPF: Support for graceful restart
Implement OSPFv2 (RFC 3623) and OSPFv3 (RFC 5187) graceful restart,
for both restarting and helper sides. Graceful restart is initiated
by 'graceful down' command.
2019-06-30 21:30:41 +02:00
Ondrej Zajicek (work)
875cc073b0 Nest: Update handling of temporary attributes
The temporary atttributes are no longer removed by ea_do_prune(), but
they are undefined by store_tmp_attrs() protocol hooks. This fixes
several bugs where temporary attributes were removed when they should
not or not removed when they should be. The flag EAF_TEMP is no longer
needed and was removed.

Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use
helper functions and to handle unset attributes properly.

Also fix some related bugs like improper handling of empty eattr list.
2019-03-14 17:31:40 +01:00
Ondrej Zajicek (work)
9aa77fcceb OSPF: Improved handling of tmpattrs
Keep track of whether OSPF tmpattrs are actually defined for given route
(using flags in rte->pflags). That makes them behave more like real
eattrs so a protocol can define just a subset of them or they can be
undefined by filters.

Do not set ospf_metric2 for other than type 2 external OSPF routes and do
not set ospf_tag for non-external OSPF routes. That also fixes a bug
where internal/inter-area route propagated from one OSPF instance to
another is initiated with infinity ospf_metric2.

Thanks to Yaroslav Dronskii for the bugreport.
2019-03-06 18:28:00 +01:00
Ondrej Zajicek (work)
bf8d7bba9e OSPF: Reset LSAs during area type change
When area is reconfigured to a different type, we need to flush LSAs as
they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we
have have just one OSPF area and that changes type, we could restart OSPF
as there is no state to keep anyway. That solves issue with different
handling of external routes exported to OSPF based of main area type.
2019-02-17 01:54:01 +01:00
Ondrej Zajicek (work)
4a3f5b3617 OSPF: Basic support for DN-bit handling (RFC 4576)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are
marked by DN flag and they are ignored by other OSPF routers with VPN-PE
enabled.
2019-02-13 15:53:36 +01:00
Ondrej Zajicek (work)
5a50a98980 OSPF: Opaque LSAs and Router Information LSA
Add support for OSPFv2 Opaque LSAs (RFC 5250) and for Router Information
LSA (RFC 7770). The second part is here mainly for testing opaque LSAs.
2019-01-24 22:45:27 +01:00
Ondrej Zajicek (work)
0f40405fc9 Update RFC references
Progdoc comments do not allow SGML tags
2018-12-12 16:38:30 +01:00
Jan Maria Matejka
14375237f6 Terminology cleanup: The import_control hook is now called preexport.
Once upon a time, far far away, there were the old Bird developers
discussing what direction of route flow shall be called import and
export. They decided to say "import to protocol" and "export to table"
when speaking about a protocol. When speaking about a table, they
spoke about "importing to table" and "exporting to protocol".

The latter terminology was adopted in configuration, then also the
bird CLI in commit ea2ae6dd0 started to use it (in year 2009). Now
it's 2018 and the terminology is the latter. Import is from protocol to
table, export is from table to protocol. Anyway, there was still an
import_control hook which executed right before route export.

One thing is funny. There are two commits in April 1999 with just two
minutes between them. The older announces the final settlement
on config terminology, the newer uses the other definition. Let's see
their commit messages as the git-log tool shows them (the newer first):

    commit 9e0e485e50
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:17:59 1999 +0000

	Added some new protocol hooks (look at the comments for better explanation):

		make_tmp_attrs          Convert inline attributes to ea_list
		store_tmp_attrs         Convert ea_list to inline attributes
		import_control          Pre-import decisions

    commit 5056c559c4
    Author: Martin Mares <mj@ucw.cz>
    Date:   Mon Apr 5 20:15:31 1999 +0000

	Changed syntax of attaching filters to protocols to hopefully the final
	version:

		EXPORT <filter-spec>    for outbound routes (i.e., those announced
					by BIRD to the rest of the world).
		IMPORT <filter-spec>    for inbound routes (i.e., those imported
					by BIRD from the rest of the world).

	where <filter-spec> is one of:

		ALL                     pass all routes
		NONE                    drop all routes
		FILTER <name>           use named filter
		FILTER { <filter> }     use explicitly defined filter

	For all protocols, the default is IMPORT ALL, EXPORT NONE. This includes
	the kernel protocol, so that you need to add EXPORT ALL to get the previous
	configuration of kernel syncer (as usually, see doc/bird.conf.example for
	a bird.conf example :)).

Let's say RIP to this almost 19-years-old inconsistency. For now, if you
import a route, it is always from protocol to table. If you export a
route, it is always from table to protocol.

And they lived happily ever after.
2018-12-04 10:53:01 +01:00
Ondrej Zajicek (work)
961671c0f5 Lib: Add and use ev_new_init() 2018-10-01 15:55:23 +02:00
Jan Maria Matejka
d4cebc6bbe No more warnings ...
no more warnings
No more warnings over me
And while it is being compiled all the log is black and white
Release BIRD now and then let it flee

(use the melody of well-known Oh Freedom!)
2018-09-18 14:21:11 +02:00
Ondrej Zajicek (work)
7b9b0c0a00 Cleanup some warnings 2018-07-03 18:08:35 +02:00
Jan Maria Matejka
13c0be19d3 Nest: Removing separate tmpa from route propagation
This is a fundamental change of an original (1999) concept of route
processing inside BIRD. During import/export, there was a temporary
ea_list created which was to be used instead of the another one inside
the route itself.

This led to some confusion, quirks, and strange filter code that handled
extended route attributes. Dropping it now.

The protocol interface has changed in an uniform way -- the
`struct ea_list *attrs` argument has been removed from store_tmp_attrs(),
import_control(), rt_notify() and get_route_info().
2018-05-30 17:08:49 +02:00
Jan Maria Matejka
ee7e2ffd26 Protocol: Introducing an enum protocol_class
This supersedes the EAP_* constants.
2018-05-29 12:35:06 +02:00
Ondrej Zajicek (work)
feae132e0f Do not initialize route metrics in import_control hook
During route export, the receiving protocol often initialized route
metrics to default value in its import_control hook before export filter
was executed. This is inconsistent with the expectation that an export
filter would process the same route as one in the routing table and it
breaks setting these metrics before (e.g. for static routes directly in
static protocol).

The patch removes the initialization of route metrics in import_control
hook, the default values are already handled in rt_notify hook called
after export filters.

The patch also changed the behavior of OSPF to keep metrics when a route
is reannounced between OSPF instances (to be consistent with other
protocols) and the behavior when both ospf_metric1 and ospf_metric2
are specified (to have more expected behavior).
2018-05-24 14:51:05 +02:00
Ondrej Zajicek (work)
e87a95d97d Minor fixes for debug mode 2017-12-16 16:31:43 +01:00
Ondrej Zajicek (work)
a6f79ca57f Timers: Revert temporary names and remove old timer.h 2017-12-07 13:54:59 +01:00
Ondrej Zajicek (work)
b32d557a6e OSPF: Update to new timers
Note that recurrent timers are currently limited to ~1 hour.
2017-12-07 13:53:42 +01:00
Ondrej Zajicek (work)
025525266f Timers: Replace old timers with microsecond timers
The old timer interface is still kept, but implemented by new timers. The
plan is to switch from the old inteface to the new interface, then clean
it up.
2017-12-07 13:49:27 +01:00
Ondrej Zajicek (work)
d3f4f92b0e OSPF: Support of address families in OSPFv3
OSPFv3-AF can handle multiple topologies of diferent address families
(IPv4, IPv6, both unicast and multicast) using separate instances
distinguished by instance ID ranges.
2017-10-10 16:10:02 +02:00
Jan Moskyto Matejka
4e276a8920 Merged multipath and single-path data structures.
Dropped struct mpnh and mpnh_*()
Now struct nexthop exists, nexthop_*(), and also included struct nexthop
into struct rta.

Also converted RTD_DEVICE and RTD_ROUTER to RTD_UNICAST. If it is needed
to distinguish between these two cases, RTD_DEVICE is equivalent to
IPA_ZERO(a->nh.gw), RTD_ROUTER is then IPA_NONZERO(a->nh.gw).

From now on, we also explicitely want C99 compatible compiler. We assume
that this 20-year norm should be known almost everywhere.
2016-12-22 13:01:06 +01:00
Ondrej Zajicek (work)
f4a60a9bc4 Channels - explicit links between protocols and tables
The patch adds support for channels, structures connecting protocols and
tables and handling most interactions between them. The documentation is
missing yet.
2016-02-01 10:28:50 +01:00
Ondrej Zajicek (work)
74c838a870 Move ID allocator to a separate file and use it also in OSPF 2015-12-29 15:42:12 +01:00
Ondrej Zajicek (work)
600998fcb1 Modify FIB_WALK() and FIB_ITERATE() to work with new FIB code
Returned user data pointers have offset relative to fib_node.
2015-12-21 20:28:44 +01:00
Ondrej Zajicek (work)
23c212e7f1 Follow-up work on integration 2015-12-21 03:33:18 +01:00
Jan Moskyto Matejka
7fd4143ead Integrated address print lengths
Minor changes by Ondrej Santiago Zajicek
2015-12-20 13:47:39 +01:00
Ondrej Zajicek (work)
d44e686e9b Follow-up commit on integrated BIRD
Use net_addr for interface address prefixes, support net_addr in
configuration parser.
2015-11-12 02:03:59 +01:00
Ondrej Zajicek (work)
fe9f1a6ded Initial commit on integrated BIRD
New data types net_addr and variants (in lib/net.h) describing
network addresses (prefix/pxlen). Modifications of FIB structures
to handle these data types and changing everything to use these
data types instead of prefix/pxlen pairs where possible.

The commit is WiP, some protocols are not yet updated (BGP, Kernel),
and the code contains some temporary scaffolding.

Comments are welcome.
2015-11-05 12:48:52 +01:00
Ondrej Zajicek
1321e12ac4 Static: Allows to specify attributes for static routes
The patch adds suport for specifying route attributes together with
static routes, e.g.:

 route 10.1.1.0/24 via 10.0.0.1 { krt_advmss = 1200; ospf_metric1 = 100; };
2015-07-20 17:11:10 +02:00
Ondrej Zajicek
2bbc308321 Store protocol config size inside protocol structure
Make proto_config_new() use this info instead of supplied size.

Thanks to Alexander V. Chernikov for the patch.
2015-02-21 21:08:23 +01:00
Ondrej Zajicek
6f8bbaa10b Fininshing integrated OSPF. 2014-11-03 10:42:55 +01:00
Ondrej Zajicek
f8fefde318 Refactoring of OSPF messages. 2014-10-24 11:07:38 +02:00
Ondrej Zajicek
178a197afb OSPF instance id option and documentation update. 2014-07-21 21:50:56 +02:00
Ondrej Zajicek
742029eb78 Whitespace cleanup in OSPF. 2014-07-19 17:28:38 +02:00
Ondrej Zajicek
a7a7372aa7 Temporary integrated OSPF commit. 2014-07-18 18:24:12 +02:00
Ondrej Zajicek
70945cb645 Temporary integrated OSPF commit. 2014-06-26 11:58:57 +02:00
Ondrej Zajicek
145368f547 Extends multipath support for OSPF.
Fixes cases where the same network or external route are propagated by
several OSPF routes and some other corner cases in next hop construction
and ECMP. Allows to specify whether external routes should be merged.

Thanks to Peter Christensen for the original patch.
2014-04-23 13:54:28 +02:00
Ondrej Zajicek
10c2e1e012 Fixes crash when state of disabled OSPF protocol is queried.
Thanks to Ondrej Caletka for the bugreport.
2014-02-06 17:54:25 +01:00
Ondrej Zajicek
48e5f32db6 Many changes in I/O and OSPF sockets and packet handling.
I/O:
 - BSD: specify src addr on IP sockets by IP_HDRINCL
 - BSD: specify src addr on UDP sockets by IP_SENDSRCADDR
 - Linux: specify src addr on IP/UDP sockets by IP_PKTINFO
 - IPv6: specify src addr on IP/UDP sockets by IPV6_PKTINFO
 - Alternative SKF_BIND flag for binding to IP address
 - Allows IP/UDP sockets without tx_hook, on these
   sockets a packet is discarded when TX queue is full
 - Use consistently SOL_ for socket layer values.

OSPF:
 - Packet src addr is always explicitly set
 - Support for secondary addresses in BSD
 - Dynamic RX/TX buffers
 - Fixes some minor buffer overruns
 - Interface option 'tx length'
 - Names for vlink pseudoifaces (vlinkX)
 - Vlinks use separate socket for TX
 - Vlinks do not use fixed associated iface
 - Fixes TTL for direct unicast packets
 - Fixes DONTROUTE for OSPF sockets
 - Use ifa->ifname instead of ifa->iface->name
2014-02-06 17:46:01 +01:00
Ondrej Zajicek
736e143fa5 Merge branch 'master' into add-path
Conflicts:

	filter/filter.c
	nest/proto.c
	nest/rt-table.c
	proto/bgp/bgp.h
	proto/bgp/config.Y
2013-11-23 11:50:34 +01:00
Ondrej Zajicek
f623ab9875 Implements OSPF stub router option (RFC 3137).
Also fixes OSPFv3 routing table calculcation w.r.t.
errata 2078 to RFC 5340.
2013-06-11 12:12:11 +02:00
Ondrej Zajicek
79b4e12e60 Implements interface masks for choosing router id.
Router ID could be automatically determined based of subset of
ifaces/addresses specified by 'router id from' option. The patch also
does some minor changes related to router ID reconfiguration.

Thanks to Alexander V. Chernikov for most of the work.
2012-12-27 12:56:23 +01:00
Ondrej Zajicek
dd4da6f640 Fixes another bug in OSPFv3 vlinks. 2012-10-31 17:14:35 +01:00
Ondrej Zajicek
8249ad9b30 Fixes sorting in OSPF show state. 2012-10-29 20:39:03 +01:00
Ondrej Zajicek
094d2bdb79 Implements ADD-PATH extension for BGP.
Allows to send and receive multiple routes for one network by one BGP
session. Also contains necessary core changes to support this (routing
tables accepting several routes for one network from one protocol).
It needs some more cleanup before merging to the master branch.
2012-08-14 16:46:43 +02:00
Ondrej Zajicek
bbcfd5a048 Fixes default route in OSPF multiple area setting. 2012-07-26 13:59:50 +02:00
Ondrej Zajicek
d494df63ac Some minor fixes. 2012-04-27 00:04:51 +02:00
Ondrej Zajicek
20ab192bec Adds filtering to 'show ospf lsadb' command.
Thanks Alexander V. Chernikov for the original patch.
2012-03-16 12:12:26 +01:00
Ondrej Zajicek
39c028e9e9 Assign default protocol preference via proto_config_new().
The patch from Alexander V. Chernikov.
2012-01-24 11:31:00 +01:00
Ondrej Zajicek
2918e61046 Fixes for OSPF NSSA handling. 2011-09-03 21:31:26 +02:00
Ondrej Zajicek
ed317862c2 OSPF NSSA support, inter-area LSA translation. 2011-08-08 01:45:31 +02:00