The fact that the recorder uses a separate thread is an internal detail,
so the functions _start(), _stop() and _join() should not be exposed.
Instead, start the thread on _open() and _stop()+_join() on close().
This paves the way to expose the recorder as a packet sink trait.
The video buffer took ownership of the producer frame (so that it could
swap frames quickly).
In order to support multiple sinks plugged to the decoder, the decoded
frame must not be consumed by the display video buffer.
Therefore, move the producer and consumer frames out of the video
buffer, and use FFmpeg AVFrame refcounting to share ownership while
avoiding copies.
This flag forced the decoder to wait for the previous frame to be
consumed by the display.
It was initially implemented as a compilation flag for testing, not
intended to be exposed at runtime. But to remove ifdefs and to allow
users to test this flag easily, it had finally been exposed by commit
ebccb9f6cc.
In practice, it turned out to be useless: it had no practical impact,
and it did not solve or mitigate any performance issues causing frame
skipping.
But that added some complexity to the codebase: it required an
additional condition variable, and made video buffer calls possibly
blocking, which in turn required code to interrupt it on exit.
To prepare support for multiple sinks plugged to the decoder (display
and v4l2 for example), the blocking call used for pacing the decoder
output becomes unacceptable, so just remove this useless "feature".
Double-click on extra mouse button to open the settings panel (a
single-click opens the notification panel).
This is consistent with the keyboard shortcut MOD+n+n.
PR #2264 <https://github.com/Genymobile/scrcpy/pull/2264>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The collapsing action collapses any panels.
By the way, the Android method is named collapsePanels().
PR #2260 <https://github.com/Genymobile/scrcpy/pull/2260>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The shortcut "back on screen on" is a bit special: the control is
requested by the client, but the actual event injection (POWER or BACK)
is determined on the device.
To properly inject DOWN and UP events for BACK, transmit the action as
a control parameter.
If the screen is off:
- on DOWN, inject POWER (DOWN and UP) (wake up the device immediately)
- on UP, do nothing
If the screen is on:
- on DOWN, inject BACK DOWN
- on UP, inject BACK UP
A corner case is when the screen turns off between the DOWN and UP
event. In that case, a BACK UP event will be injected, so it's harmless.
As a consequence of this change, the BACK button is now handled by
Android on mouse released. This is consistent with the keyboard shortcut
(Mod+b) behavior.
PR #2259 <https://github.com/Genymobile/scrcpy/pull/2259>
Refs #2258 <https://github.com/Genymobile/scrcpy/pull/2258>
The screen receives callbacks from the decoder, fed by the stream.
The decoder is run from the stream thread, so waiting for the end of
stream is sufficient to avoid possible use-after-destroy.
When --no-display was passed, screen_destroy() was called while
screen_init() was never called.
In practice, it did not crash because it just freed NULL pointers, but
it was still incorrect.
A skipped frame is detected when the producer offers a frame while the
current pending frame has not been consumed.
However, the producer (in practice the decoder) is not interested in the
fact that a frame has been skipped, only the consumer (the renderer) is.
Therefore, notify frame skip via a consumer callback. This allows to
manage the skipped and rendered frames count at the same place, and
remove fps_counter from decoder.
As soon as the stream is started, the video buffer could notify a new
frame available.
In order to pass this event to the screen without race condition, the
screen must be initialized before the screen is started.
Video buffer is a tool between a frame producer and a frame consumer.
For now, it is used between a decoder and a renderer, but in the future
another instance might be used to swscale decoded frames.
It makes sense to extract default values for bitrate and port range
(which are arbitrary and might be changed in the future).
However, the default values for "max size" and "lock video orientation"
are naturally unlimited/unlocked, and will never be changed. Extracting
these options just added complexity for no benefit, so hardcode them.
After the struct screen is initialized, the window, the renderer and the
texture are necessarily valid, so there is no need to check in
screen_destroy().
There were only two frames simultaneously:
- one used by the decoder;
- one used by the renderer.
When the decoder finished decoding a frame, it swapped it with the
rendering frame.
Adding a third frame provides several benefits:
- the decoder do not have to wait for the renderer to release the
mutex;
- it simplifies the video_buffer API;
- it makes the rendering frame valid until the next call to
video_buffer_take_rendering_frame(), which will be useful for
swscaling on window resize.
The functions SDL_malloc(), SDL_free() and SDL_strdup() were used only
because strdup() was not available everywhere.
Now that it is available, use the native version of these functions.
Small unsigned integers promote to signed int. As a consequence, if v is
a uint8_t, then (v << 24) yields an int, so the left shift is undefined
if the MSB is 1.
Cast to uint32_t to yield an unsigned value.
Reported by USAN (meson x -Db_sanitize=undefined):
runtime error: left shift of 255 by 24 places cannot be represented
in type 'int'
The current process could be waited both by run_file_handler() and
file_handler_stop().
To avoid the race condition, wait the process without closing, then
close with mutex locked.
There were two versions: process_wait() and process_wait_noclose().
Expose a single version with a flag (it was already implemented that way
internally).
The function process_wait() returned a bool (true if the process
terminated successfully) and provided the exit code via an output
parameter exit_code.
But the returned value was always equivalent to exit_code == 0, so just
return the exit code instead.
The size, point and position structs were defined in common.h. Move them
to coords.h so that common.h could be used for generic code to be
included in all source files.
The header libavformat/version.h was included, but not
libavcodec/version.h.
As a consequence, the LIBAVCODEC_VERSION_INT definition depended on the
caller includes.
On Linux, waitpid() both waits for the process to terminate and reaps it
(closes its handle). On Windows, these actions are separated into
WaitForSingleObject() and CloseHandle().
Expose these actions separately, so that it is possible to send a signal
to a process while waiting for its termination without race condition.
This allows to wait for server termination normally, but kill the
process without race condition if it is not terminated after some delay.
Let the server terminate properly once all the sockets are closed.
If it does not terminate (this can happen if the device is asleep), then
kill it.
Note: since the server process termination is detected by a flag set
after waitpid() returns, there is a small chance that the process
terminates (and the PID assigned to a new process) before the flag is
set but before the kill() call. This race condition already existed
before this commit.
Fixes#1992 <https://github.com/Genymobile/scrcpy/issues/1992>
TerminateProcess() is "equivalent" to kill(), while
WaitForSingleObject() is "equivalent" to waitpid(), so the handle must
be closed after WaitForSingleObject().
On Windows, scrcpy paused on error before exiting to give the user a
chance to see the user message.
This was a hack and causes issues when using scrcpy from batch scripts.
Disable this pause from the scrcpy binary, and provide a batch wrapper
(scrcpy-console.bat) to pause on error.
Fixes#1875 <https://github.com/Genymobile/scrcpy/issues/1875>
Use "%Iu" on Windows. This fixes the following warning:
../app/src/sys/win/command.c:17:14: warning: unknown conversion type character ‘l’ in format [-Wformat=]
17 | LOGE("Command too long (%" PRIsizet " chars)", len - 1);
A new "repeat" field has been added by
3c1ed5d86c, but it was not initialized in
every code path.
As a consequence, keycodes generated by shortcuts were sent with an
undetermined value, breaking some shortcuts (especially HOME) randomly.
Fixes#1643 <https://github.com/Genymobile/scrcpy/issues/1643>
This avoids to pass specific options values individually. Since these
function are static (internal to the file), this is not a problem to
make them depend on scrcpy_options.
Refs #1623 <https://github.com/Genymobile/scrcpy/pull/1623>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Send COPY and CUT on MOD+c and MOD+x (only supported for Android >= 7).
The shortcuts Ctrl+c and Ctrl+x should generally also work (even before
Android 7), but the active Android app may use them for other actions
instead.
Do not explicitly set the clipboard text if it already contains the
expected content.
Even if copy-paste loops are avoided by the previous commit, this avoids
to trigger a clipboard change on the computer-side.
Refs #1580 <https://github.com/Genymobile/scrcpy/issues/1580>
Pressing Ctrl+v on the device will typically paste the clipboard
content.
Before sending the key event, synchronize the computer clipboard to the
device clipboard to allow seamless copy-paste.
Now that the scrcpy shortcut modifier is Alt by default (and can be
configured), forward Ctrl to the device.
This allows to trigger Android shortcuts.
Fixes#555 <https://github.com/Genymobile/scrcpy/issues/555>
Pressing Alt+c generates a text event containing "c", so "c" was sent to
the device when --prefer-text was enabled.
Ignore text events when the mod state matches a shortcut modifier.
Remove the Cmd modifier on macOS, which was possible only for some
shortcuts but not all.
This paves the way to make the shortcut modifier customizable.
Touch events were HiDPI-scaled twice:
- once because the position (provided as floats between 0 and 1) were
converted in pixels using the drawable size (not the window size)
- once due to screen_convert_to_frame_coords()
One possible fix could be to compute the position in pixels from the
window size instead, but this would unnecessarily round the event
position to the nearest window coordinates (instead of drawable
coordinates).
Instead, expose two separate functions to convert to frame coordinates
from either window or drawable coordinates.
Fixes#1536 <https://github.com/Genymobile/scrcpy/issues/1536>
Refs #15 <https://github.com/Genymobile/scrcpy/issues/15>
Refs e40532a376
The header scrcpy.h is intended to be the "public" API. It should not
depend on other internal headers.
Therefore, declare all required structs in this header and adapt
internal code.
The function must return a SDL_LogPriority, but returned an enum
sc_log_level.
(It was harmless because this specific return should never happen, as
asserted.)
This reverts commit 8c8649cfcd.
I cannot reproduce the issue with Ctrl+Shift+o on any device, so in
practice it works, it's too bad to remove the feature for a random bug
on some Android versions on some devices.
Add a command-line option to force "adb forward", without attempting
"adb reverse" first.
This is especially useful for using SSH tunnels without enabling remote
port forwarding.
The verbosity was set either to info (in release mode) or debug (in
debug mode).
Add a command-line argument to change it, so that users can enable debug
logs using the release:
scrcpy -Vdebug
The field lock_video_orientation may only take values between -1 and 3
(included). But the compiler may trigger a warning on the sprintf()
call, because its type could represent values which could overflow the
string (like "-128"):
> warning: ‘%i’ directive writing between 1 and 4 bytes into a region of
> size 3 [-Wformat-overflow=]
Increase the buffer size to remove the warning.
Trilinear filtering can currently only be enabled for OpenGL renderers.
Do not print a warning if the renderer is not OpenGL, as it can confuses
users, while nothing is wrong.
On macOS with renderer "metal", HiDPI scaling may be incorrect on
initialization when several displays are connected.
Resetting the window size fixes the problem.
Refs #15 <https://github.com/Genymobile/scrcpy/issues/15>
Position and scale the content "manually" instead of relying on the
renderer "logical size".
This avoids possible rounding differences between the computed window
size and the content size, causing one row or column of black pixels on
the bottom or on the right.
This also avoids HiDPI scale issues, by computing the scaling manually.
This will also enable to draw items at their expected size on the screen
(unscaled).
Fixes#15 <https://github.com/Genymobile/scrcpy/issues/15>
In maximized state (but not fullscreen), it was possible to resize to
fit the device screen (with Ctrl+x or double-clicking on black borders).
This caused problems on macOS with the "expand to fullscreen" feature,
which behaves like a fullscreen mode but is seen as maximized by SDL.
In that state, resizing to fit causes unexpected results.
To keep the behavior consistent on all platforms, just disable "resize
to fit" when the window is maximized.
On Windows, in maximized+fullscreen state, disabling fullscreen mode
unexpectedly triggers the "restored" then "maximized" events, leaving
the window in a weird state (maximized according to the events, but not
maximized visually).
Moreover, apply_pending_resize() asserts that fullscreen is disabled.
To avoid the issue, if fullscreen is set, just ignore the "restored"
event.
If the content size changes (due to rotation for example) while the
window is maximized or fullscreen, the resize must be applied once
fullscreen and maximized are disabled.
The previous strategy consisted in storing the windowed size, computing
the target size on rotation, and applying it on window restoration. But
tracking the windowed size (while ignoring the non-windowed size) was
tricky, due to unspecified order of SDL events (e.g. size changes can be
notified before "maximized" events), race conditions when reading window
flags, different behaviors on different platforms...
To simplify the whole resize management, store the old content size (the
frame size, possibly rotated) when it changes while the window is
maximized or fullscreen, so that the new optimal size can be computed on
window restoration.
By default, Ctrl+C just kills the process on Windows. This caused
corrupted video files on recording.
Handle Ctrl+C properly to clean up properly.
Fixes#818 <https://github.com/Genymobile/scrcpy/issues/818>
Now that the server can access the Android settings and clean up
properly, handle the "show touches" option from the server.
The initial state is now correctly restored, even on device
disconnection.
The window dimensions are integers, so resizing to fit the content may
not be exact.
When computing the optimal size, it could cause to reduce alternatively
the width and height by few pixels, making the "optimal size" unstable.
To avoid this problem, check if the optimal size is already correct
either by keeping the width or the height.
Move the window-to-frame coordinates conversion from the input manager
to the screen.
This will allow to apply more screen-related transformations without
impacting the input manager.
Some compilers warns on uninitialized value in impossible case:
warning: variable 'result' is used uninitialized whenever switch
default is taken [-Wsometimes-uninitialized]
A double-click outside the device content (in the black borders) resizes
so that black borders are removed. But the display rotation was not
taken into account to detect the content.
Use the content size instead of the frame size to fix the issue.
Ref: <https://github.com/Genymobile/scrcpy/issues/898#issuecomment-610993695>
Add Ctrl+Left and Ctrl+Right shortcuts to rotate the display (the
content of the scrcpy window).
Contrary to --lock-video-orientation, the rotation has no impact on
recording, and can be changed dynamically (and immediately).
Fixes#218 <https://github.com/Genymobile/scrcpy/issues/218>
The server may die before connecting to the client. In that case, the
client was blocked indefinitely (until Ctrl+C) on accept().
To avoid the problem, close the server socket once the server process is
dead.
